Two-component, anti-acid epoxy paint modified with hydro-carbide resin for protecting concrete and steel surfaces. TECHNICAL DATA: Consistency: component A fluid paste, component B fluid paste.…
Two-component, anti-acid epoxy paint modified with hydro-carbide resin for…
Cementitious adhesive mortar for expanded block masonry. TECHNICAL DATA: Maximum diameter of aggregate: 1 mm. Mixing ratio: 100 parts of POROCOL with 23-25 parts of water. Pot life of mix:…
Cementitious adhesive mortar for expanded block masonry. TECHNICAL DATA:…
TECHNICAL CHARACTERISTICS Mapeproof AL AP is a waterproofing membrane made up of a synthetic HDPE sheet with an adhesive side covered with a pressure sensitive protective coating. When it comes into…
TECHNICAL CHARACTERISTICS Mapeproof AL AP is a waterproofing membrane made up…
Three-component polyurethane/cement-based coloured glossy formulate for coating walls and as a finishing coat on polyurethane/cementitious systems for industrial floors
Three-component polyurethane/cement-based coloured glossy formulate for coating…
Two-component, high-ductility cementitious mortar with a pozzolanic-reaction binder base, applied at a maximum thickness of 25 mm, for levelling off stone, brick and tuff substrates before laying…
Two-component, high-ductility cementitious mortar with a pozzolanic-reaction…
Hydrophilic expandable rubber section for watertight construction joints. Idrostop is a soft preformed flexible strip, with an acrylic polymer base specially designed to form watertight construction…
Hydrophilic expandable rubber section for watertight construction joints.…
Epoxy primer for the MapeWrap system TECHNICAL CHARACTERISTICS MapeWrap Primer 1 SP is a solvent-free epoxy resin based product made up of two pre-dosed components (that must be mixed together before…
Epoxy primer for the MapeWrap system TECHNICAL CHARACTERISTICS MapeWrap Primer…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel waterproofing. • Open cut tunnel waterproofing. • Underground structures waterproofing. Packaging Mapeplan TU is supplied in 20…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel…
Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approx. 1 h.…
Osmotic cementitious mortar suitable for contact with drinking water, for…
TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement. TECHNICAL DATA: Sizes available: – 17 cm (MAPEBAND TPE 170); – 32.5 cm (MAPEBAND TPE 325). Width of…
TPE tape for flexible sealing and waterproofing of expansion joints and cracks…
Mono-filament, virgin polypropylene fibres with a length of 12 and 18 mm, for concrete Where to use: Mapefibre NS12 is particularly suitable for the following: production of concrete used for…
Mono-filament, virgin polypropylene fibres with a length of 12 and 18 mm, for…
Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: diluted up to 300% of water.…
Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid…
One-component pre-blended thixotropic mortar with controlled shrinkage for anchoring, by injection, of tie rods and bolts in all types of grounds. Use Stabilcem T for anchoring tie rods of any length…
One-component pre-blended thixotropic mortar with controlled shrinkage for…
