TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement. TECHNICAL DATA: Sizes available: – 17 cm (MAPEBAND TPE 170); – 32.5 cm (MAPEBAND TPE 325). Width of…
TPE tape for flexible sealing and waterproofing of expansion joints and cracks…
Mono-filament, virgin polypropylene fibres with a length of 12 and 18 mm, for concrete Where to use: Mapefibre NS12 is particularly suitable for the following: production of concrete used for…
Mono-filament, virgin polypropylene fibres with a length of 12 and 18 mm, for…
Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: diluted up to 300% of water.…
Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid…
One-component pre-blended thixotropic mortar with controlled shrinkage for anchoring, by injection, of tie rods and bolts in all types of grounds. Use Stabilcem T for anchoring tie rods of any length…
One-component pre-blended thixotropic mortar with controlled shrinkage for…
Two-component, aromatic, coloured, elastic, polyurethane resin to form the coating systems MAPEFLOOR COMFORT SYSTEM AR and MAPEFLOOR COMFORT SYSTEM AR/X. Available only upon request. TECHNICAL DATA:…
Two-component, aromatic, coloured, elastic, polyurethane resin to form the…
Powdered crystallising admixture for waterproof concrete. TECHNICAL DATA: Dosage: 1 to 3 kg every 100 kg of cement. Packaging: 20 kg bags and boxes of 4 x 4 kg water-soluble bags.
Powdered crystallising admixture for waterproof concrete. TECHNICAL DATA:…
Expansive agent for concrete. Expancrete is a powder admixture used to manufacture shrinkage-compensated concrete and mortars. Expancrete is suitable for water tight castings and castings that…
Expansive agent for concrete. Expancrete is a powder admixture used to…
Two-component polyurethane elastomeric, thixotropic, liquid waterproofing membrane for sealing, filling, detailing Mapeproof AL NA and Mapethene HT/LT membranes
Fine-grained coloured coating made from acrylic resin in water dispersion and micro-granular quartz sand, for indoor and outdoor tennis courts, multi-purpose playing fields, cycle tracks and footpaths
Fine-grained coloured coating made from acrylic resin in water dispersion and…
Two-component epoxy coating in water dispersion with a gloss finish to form smooth films of resin coating. Specifically developed for coating the surface of walls and ceilings in clean rooms.…
Two-component epoxy coating in water dispersion with a gloss finish to form…
Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…
Water-based acrylic undercoat and bonding promoter with a smooth finish.…
Mapeplan® B is a synthetic roofing waterproofing membrane in PVC-P produced in one multiextrusion coating process, with high quality raw materials, reinforced with glass mat. Mapeplan® B is conform…
Mapeplan® B is a synthetic roofing waterproofing membrane in PVC-P produced in…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…
