Two-component epoxy coating in water dispersion with a gloss finish to form smooth films of resin coating. Specifically developed for coating the surface of walls and ceilings in clean rooms.…
Two-component epoxy coating in water dispersion with a gloss finish to form…
Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…
Water-based acrylic undercoat and bonding promoter with a smooth finish.…
Mapeplan® B is a synthetic roofing waterproofing membrane in PVC-P produced in one multiextrusion coating process, with high quality raw materials, reinforced with glass mat. Mapeplan® B is conform…
Mapeplan® B is a synthetic roofing waterproofing membrane in PVC-P produced in…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…
One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.…
One-component, ultra-fluid polyurethane resin applied by injection for…
Ultra rapid setting two-component polyurethane resin with fluid consistency, to be injected for consolidating and waterproofing of structures subject to weal water ingress Where to use –…
Ultra rapid setting two-component polyurethane resin with fluid consistency, to…
Cement-free fillerized hydraulic lime- and Eco-Pozzolan-based binder, for consolidating, by injection, stone, brick work and tuff structures. Mape-Antique I is a pre-blended sulphate-resistant binder…
Cement-free fillerized hydraulic lime- and Eco-Pozzolan-based binder, for…
Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces broadcast with quartz sand. TECHNICAL DATA: Application…
Surface treatment in liquid form made from lithium silicate with a…
Pre-blended, ready-to-use industrial hardener for concrete floors made from special quartz in a granulometric curve, Portland cement and special additives. TECHNICAL DATA: Colour of mix: light grey,…
Pre-blended, ready-to-use industrial hardener for concrete floors made from…
One-component cementitious mortar with high bonding strength for interior and exterior smoothing of rough surfaces and for finishing walls (fine texture effect). Planitop 200 is used to smooth…
One-component cementitious mortar with high bonding strength for interior and…
Acrylic sealant suitable for painting over. Sealing expansion, shrinkage and fillet joints with movements of up to 12.5% of the width of the joint on ceramic, marble and natural stone façades and…
Acrylic sealant suitable for painting over. Sealing expansion, shrinkage and…
Synthetic-rubber latex for cement mixes Technical Charateristics Planicrete 50 is a water dispersion of a special synthetic elastomer, totally resistant to alkaline saponification. When mixed with…
Synthetic-rubber latex for cement mixes Technical Charateristics Planicrete 50…
Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…
Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…
Hydro-oil repellent and anti-stain treatment for concrete, natural stone and cementitious surfaces made from modified organic polymers in water solution. TECHNICAL DATA: Application temperature…
Hydro-oil repellent and anti-stain treatment for concrete, natural stone and…
Latex additive to elasticize cement-based adhesives Isolastic 50 is a latex to be mixed with Kerabond T, Kerafloor and Adesilex P10 to improve their performances and deformability to meet the…
Latex additive to elasticize cement-based adhesives Isolastic 50 is a latex to…
