MAPEFLOOR SYSTEM 51 is a multi-layered epoxy coating system used to make industrial floors that are moderately resistant to chemical products , resistant to frequent cleaning operations and wear from…
MAPEFLOOR SYSTEM 51 is a multi-layered epoxy coating system used to make…
Paintable, castable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.25 N/mm².…
Paintable, castable polyurethane sealant with a low modulus of elasticity for…
Water-repellent, coloured siloxane undercoat with a smooth finish and good filling properties for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…
Water-repellent, coloured siloxane undercoat with a smooth finish and good…
Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…
Smoothing mortar for internal and external walls and ceilings for thicknesses…
TECHNICAL CHARACTERISTICS Mapethene HT AP is a waterproofing, pre-formed self-adhesive bituminous membrane made from a mixture of bitumen and special polymers bonded to a double laminated film of…
TECHNICAL CHARACTERISTICS Mapethene HT AP is a waterproofing, pre-formed…
Curing liquid admixture for reducing the hydraulic shrinkage of concrete Where to use – Industrial floorings in concrete for indoors and outdoors. – Ready-mix and precast concrete where it is…
Curing liquid admixture for reducing the hydraulic shrinkage of concrete Where…
Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…
Synthetic resin primer in water dispersion with a very low content of volatile…
Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid. Colour: light yellow. Density: 0.97 g/m³. Viscosity at +23°C: 200 mPa·s. Consumption: 2-3% of the total weight of the…
Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid.…
Thixotropic epoxy adhesive with extended workability. Adesilex PG2 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives. Adesilex PG2 is…
Thixotropic epoxy adhesive with extended workability. Adesilex PG2 is a…
Polyurethane-cement, self-smoothing topping with high chemical-resistance and excellent mechanical properties, for 3-6 mm industrial floor applications.
Polyurethane-cement, self-smoothing topping with high chemical-resistance and…
