Curing liquid admixture for reducing the hydraulic shrinkage of concrete Where to use – Industrial floorings in concrete for indoors and outdoors. – Ready-mix and precast concrete where it is…
Curing liquid admixture for reducing the hydraulic shrinkage of concrete Where…
Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…
Synthetic resin primer in water dispersion with a very low content of volatile…
Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid. Colour: light yellow. Density: 0.97 g/m³. Viscosity at +23°C: 200 mPa·s. Consumption: 2-3% of the total weight of the…
Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid.…
Thixotropic epoxy adhesive with extended workability. Adesilex PG2 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives. Adesilex PG2 is…
Thixotropic epoxy adhesive with extended workability. Adesilex PG2 is a…
Polyurethane-cement, self-smoothing topping with high chemical-resistance and excellent mechanical properties, for 3-6 mm industrial floor applications.
Polyurethane-cement, self-smoothing topping with high chemical-resistance and…
Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial floor coatings up to 4 mm thick. May be coloured with MAPECOLOR PASTE. Complies with standards applied in the foodstuffs…
Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial…
Two-component multipurpose epoxy formulate for industrial floors in compliance with standards applied to the drinks and foodstuffs industry and clean rooms.
Two-component multipurpose epoxy formulate for industrial floors in compliance…
Tetraethyl orthosilicate-based consolidating product in solvent for the conservative renovation and the consolidation of porous stone substrates, bricks, terracotta and renders
Tetraethyl orthosilicate-based consolidating product in solvent for the…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…
Ultra fine textured skimming mortar for concrete; recommended for exposed finish surfaces. TECHNICAL DATA: Maximum size of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP FINE FINISH with…
Ultra fine textured skimming mortar for concrete; recommended for exposed…
