Solvent-free contact adhesive for resilient and textile floor and wall coverings. ULTRABOND ECO CONTACT is a contact adhesive which has to be applied on both the substrate and the back of the…
Solvent-free contact adhesive for resilient and textile floor and wall…
Self-adhesive butyl tape with alkali-resistant, non-woven fabric for elastic waterproofing systems. TECHNICAL DATA: Density: 1.6 g/cm³. Temperature of application: from +5°C to +30°C. Width: 100 mm.…
Self-adhesive butyl tape with alkali-resistant, non-woven fabric for elastic…
PVC tape for waterproofing systems made from liquid membranes. TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. In service temperature range: from -5°C to +30°C Packaging: – rolls 120 mm wide…
PVC tape for waterproofing systems made from liquid membranes. TECHNICAL DATA:…
Agent applied by injection made from micro-emulsion, concentrated silane and siloxane used to form a chemical barrier against capillary rising damp in masonry. TECHNICAL DATA: Dimension of particles:…
Agent applied by injection made from micro-emulsion, concentrated silane and…
Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…
Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…
Hi-flow, steel fibre-reinforced compensated-shrinkage, quick-setting and hardening, high-ductility cementitious mortar applied at temperatures down to -5°C, with stiff steel fibres for repairing…
Quick-setting and hardening, compensated-shrinkage hi-flow mortar for repairing concrete and fixing drains, manholes and urban architectural fittings in place. TECHNICAL DATA: Maximum dimension of…
Quick-setting and hardening, compensated-shrinkage hi-flow mortar for repairing…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems…
Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT FAST-SET…
Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for…
Acrylic adhesive in water dispersion for vinyl and textile floors with very low emission level of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: creamy paste. Colour: light beige.…
Acrylic adhesive in water dispersion for vinyl and textile floors with very low…
Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…
Multi-purpose, acrylic adhesive in water dispersion with a long open time and…
Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. Applications: For the formation of both floating and bonded screeds on either old or new floor…
Pre-blended, ready-to-use, quick-setting and drying (24 hours),…
Special fast setting hydraulic binder for the preparation of normal setting and fast drying (4 days) screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on…
Special fast setting hydraulic binder for the preparation of normal setting and…
Special fast setting hydraulic binder for the preparation of rapid setting and drying (24 hours) screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on both…
Special fast setting hydraulic binder for the preparation of rapid setting and…
Elasticising latex mixed with KERAQUICK S1. When KERAQUICK S1 is mixed with LATEX PLUS it forms a high-performance, quick-setting, highly-deformable adhesive (C2F/S2). TECHNICAL DATA OF LATEX PLUS +…
Elasticising latex mixed with KERAQUICK S1. When KERAQUICK S1 is mixed with…
Elasticising latex mixed with KERABOND T, KERAFLOOR and ADESILEX P10. When KERABOND T mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with extended open time (C2E/S2).…
Elasticising latex mixed with KERABOND T, KERAFLOOR and ADESILEX P10. When…
Cementitious binder for manufacturing dimensionally stable self-compacting concrete mixtures to repair concrete structures. Stabilcem SCC is used to manufacture concretes with different aggregate…
Cementitious binder for manufacturing dimensionally stable self-compacting…
