Project Budai csaladi haz, Budapest

Budai csaladi haz

Budapest, Hungary

Ref #: 92024

Category: PUBLIC BUILDINGS AND PLACES


Yard	Cold cladding, warm cladding, waterproofing
Location	Budapest, Hungary
Subcategory	HOUSE
Application	Cold cladding, warm cladding, waterproofing, treatment of concrete surfaces
Start and finish date	2022/2023
Application Type	Floor/wall coverings, Tile & stone installation systems
Contractor company	NégyeS Mérnökiroda Kft.
Installer companies	Progresszív Burkoló Kft.
Architects	Regőczi Dénes
MAPEI Distributor	Hofstädter Építőanyag Centrum Kft., Zsiráf Építőanyagok Kft., Dalos és Társa Kft.
Credits	Salty Production Kft.
MAPEI Coordination	Hugyecsek György

Product used for the project

ANTIPLUVIOL W

Transparent, silane and siloxane water-repellent impregnator in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Active…

Transparent, silane and siloxane water-repellent impregnator in watery…

KERAFLEX MAXI S1 ZERO

Special high performance, deformable, non-slip grey or white adhesive with extended open time, Low Dust technology, very low emission of volatile organic compounds and with offset Greenhouse Gas…

Special high performance, deformable, non-slip grey or white adhesive with…

MAPEBAND EASY

Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems

Rubber tape sandwiched between two layers of non-woven fabric to form elastic…

MAPEFLEX MS45

Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…

Paintable hybrid sealant and adhesive with a high modulus of elasticity also…

MAPEGUARD UM 35

Waterproofing, uncoupling and anti-fracture membrane for cracked and damp substrates and substrates that are not fully cured before installing ceramic and stone tiles

Waterproofing, uncoupling and anti-fracture membrane for cracked and damp…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRABOND P990 1K

One-component, ready-to-use, solvent-free, flexible polyurethane adhesive for all types of parquet on screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM and TOPCEM PRONTO, cementitious screeds, old…

One-component, ready-to-use, solvent-free, flexible polyurethane adhesive for…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRALITE S2 FLEX

One-component, high-performance,highly deformable, lightweight, cementitious adhesive with extended open time, Low Dust technology and extremely high yield. Easy to apply by trowel with excellent…

One-component, high-performance,highly deformable, lightweight, cementitious…