Video Library

Mapecoat ™ AG WB represents the latest in silicone technology. It is a clear, low-VOC, water-based, non-sacrificial coating that requires just cold water for the removal of most graffiti from surfaces pre-treated with this product, with no requirement of harsh chemicals or specialized equipment. Mapecoat AG WB will remain as an effective barrier against graffiti through repeated cleaning cycles.

Premium, Rapid-Setting, Lightweight Mortar with Polymer for Large and Heavy Tile MAPEI Ultralite S1 Quick is a premium-grade, rapid-setting, lightweight, single-component thin-set mortar that can also be used as a large-and-heavy-tile mortar for nonsag applications of large-and-heavy-format tile and stone. MAPEI Ultralite S1 Quick is a FastTrack Ready product allowing grouting in 3 to 4 hours. MAPEI’s High-Hydrated Cement Technology (HCT) offers superior drying characteristics for quick curing without contributing to efflorescence. This high-performance, polymer-modified mortar is formulated with Easy Glide Technology for ease of application. And thanks to its Ultralite Technology, MAPEI Ultralite S1 Quick provides twice the coverage of a standard thin-set mortar per pound/kg.

Mapecoat ™ AG WB represents the latest in silicone technology. It is a clear, low-VOC, water-based, non-sacrificial coating that requires just cold water for the removal of most graffiti from surfaces pre-treated with this product, with no requirement of harsh chemicals or specialized equipment. Mapecoat AG WB will remain as an effective barrier against graffiti through repeated cleaning cycles.

High-Gloss, Film-Forming Protective Coating for Concrete Mapecrete Protector FF is a film-forming, high-gloss protective coating designed to increase the stain resistance of interior, polished or hard-troweled concrete floors.

High-Performance, Self-Leveling Concrete Topping Ultratop [NA] is a self-leveling, self-curing, sealed or polished topping that is specially formulated for fast-track resurfacing of horizontal wear surfaces.

Very Low-Viscosity, Epoxy Injection Resin for Crack Repair Epojet LV [NA] is a moisture-tolerant, two-component, 100%-solids, very low-viscosity, epoxy injection resin that deeply penetrates as well as seals dry and damp hairline, non-dynamic cracks. Epojet LV [NA] may be applied by pressure injection or gravity feed, and can also be combined with sand to become an epoxy mortar.

Two-Component, Clear, Matte, Aliphatic Polyurethane Coating Mapefloor Finish 58 W [NA] is a two-component, aliphatic polyurethane coating in water dispersion with a clear, matte finish. Mapefloor Finish 58 W [NA] provides a high-performance finish on general-service resinous flooring products and Ultratop [NA] systems.

Two-Component, Clear Protective Acrylic Coating for Floors Mapefloor Finish 630 [NA] is a two-component, protective, acrylic filming agent in a water dispersion for floors made from concrete and Ultratop systems. Mapefloor Finish 630 [NA] provides a high-performance finish on Ultratop systems.

High-Performance, Polishable, Self-Leveling Topping for a Fine-Aggregate Finish Ultratop SP is a polishable, self-leveling, cementitious topping that provides a fine-aggregate exposed finish. Ultratop SP is engineered for fast-track resurfacing of horizontal wear surfaces.

Coarse-Textured, Cement-Based Micro-Topping Ultratop Loft F [NA] is a one-component, cement-based decorative topping that is troweled and applied in two layers 1/16" (1.5 mm) in thickness. It is specially formulated for abrasion resistance in designing non-uniform and non-homogeneous finishes with a broad range of coarse-textured finishing effects on indoor decorative surfaces. Ultratop Loft F [NA] can be used on a wide variety of substrates and combines excellent versatility with easy application.

One-Component, Clear, Water-Based Acrylic Basecoat for Mapefloor Finish Topcoats Ultratop Base Coat [NA] one-component, acrylic agent in water dispersion is used as a basecoat before applying a Mapefloor Finish topcoat over Ultratop and Ultratop Loft products. Ultratop Base Coat [NA] used with Mapefloor Finish provides a high-performance finish.

Fine-Textured, Cement-Based Micro-Topping Ultratop Loft W [NA] is a one-component, cement-based decorative topping that is troweled and applied in two layers 1/16" (1.5 mm) in thickness. It is specially formulated for abrasion resistance in designing non-uniform and non-homogeneous finishes with a broad range of finishing effects on indoor decorative surfaces. Ultratop Loft W [NA] can be used on a wide variety of substrates and combines excellent versatility with easy application.

Clear, Matte, Protective Wax for Ultratop and Ultratop Loft Systems Mapelux Opaca [NA] is a one-component, matte wax used as wear protector over MAPEI sealers permitted for Ultratop systems and Ultratop Loft systems only.

Epojet ™ [NA] is a high-strength, two-component, 100%-solids, low-viscosity, epoxy resin for pressure injection and sealing of cracks in structural concrete, masonry and wood.

Primer SN ™ [NA] is a two-component, filled, epoxy primer specifically designed to enhance adhesion of cementitious flooring systems and multilayer resin flooring, such as MAPEI’s Mapefloor ™ products, Ultratop ® products, PlaniLevel ™ products and Planitop EL multilayer epoxy resin flooring systems and multilayer traffic deck systems.

Premium Tile Adhesive Type 1 is a premium-grade, traditional, nonflammable, acrylic adhesive for setting glazed and unglazed ceramic and porcelain tiles on walls, floors and countertops. This adhesive is used for interior applications only.

Quick-Setting, Fiber-Reinforced, Cementitious Rendering Mortar Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching and leveling mortar for interior and exterior walls, floors and submerged areas. It can be applied from 1/8" to 1-1/4" (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces. Eliminating the need for a latex additive, Planitop 330 Fast requires only mixing with water to produce a non-sagging mortar that is ready for tile installation in as little as 90 minutes.

Premium Sanded Grout with Polymer Keracolor S Sanded Grout is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

Universal Grout Colorant and Sealer UltraCare Grout Refresh is a nonflammable, ready-to-use, water-based, polymer-modified colorant and sealer for grout joints. It can be applied onto and bonds to cement, epoxy, urethane and acrylic grouts.

Premium Turf Seam Tape Ultrabond Turf Tape is a PET-based, spun-bonded, nonwoven fabric tape designed specifically to work with MAPEI turf adhesives for seaming synthetic turf. Ultrabond Turf Tape is waterproof and provides superior tensile strength and tear resistance, which are vital for installations of professional athletic playing fields. It is also perfectly suited as a seaming base for other synthetic turf applications, including installations of residential landscaping, playgrounds and golf courses.

Premium, Fast-Setting, Urethane Adhesive for Turf Seams Ultrabond Turf PU 1K is a fast-setting, moisture-curing, one-component, urethane adhesive specifically designed for bonding of synthetic turf in high-performance sports installations. Offering excellent weather resistance, Ultrabond Turf PU 1K can be used in interior and exterior applications. It meets FIFA requirements for bond strength in sports-turf applications.

Mapecoat ™ AG WB represents the latest in silicone technology. It is a clear, low-VOC, water-based, non-sacrificial coating that requires just cold water for the removal of most graffiti from surfaces pre-treated with this product, with no requirement of harsh chemicals or specialized equipment. Mapecoat AG WB will remain as an effective barrier against graffiti through repeated cleaning cycles.

Advanced Waterproofing and Vapor Retarder Membrane Mapelastic WP is a premixed, liquid-rubber vapor retarder and quick-drying waterproofing membrane for installation under manufactured stone veneer units and thin brick. Mapelastic WP provides a thin, continuous barrier to protect substrates and building wall assemblies from water damage. Mapelastic WP dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer-modified mortar meeting or exceeding the ANSI A118.4 or A118.15 standard. Mapelastic WP itself exceeds ANSI A118.10 and A118.12 standards.

Liquid-Applied, Vapor-Permeable, Water-Resistive Barrier Mapelastic WRB is a single-component, liquid-applied air- and water-resistive barrier for vertical, above-grade exterior walls. Mapelastic WRB minimizes risk of condensation in wall from water vapor diffusion, thus increasing wall durability and the comfort of the building occupants. The rapid-drying formula is rain-resistant within 30 minutes of application under ideal conditions defined as 50°F (10°C) and rising in direct sunlight. Mapelastic WRB is ICC-AC AC212 approved, is NFPA 285 compliant in various assemblies and has been evaluated by ABAA for common wall assemblies. Adhered manufactured stone veneer and thin-brick units may be directbonded to the membrane when using a polymer-modified mortar meeting ANSI A118.15 over suitable substrates such as concrete masonry units, poured concrete walls, stucco basecoat and cement backerboard.

Premium, Rapid-Setting, Polymer-Modified Veneer Mortar Mapebond VM Rapid is a rapid-setting, nonsag mortar designed for the installation of manufactured stone veneer, thin-brick and natural stone in exterior/interior applications. This polymer-modified mortar has a high content of unique dry polymer, resulting in excellent adhesion between the substrate and veneer units. Mapebond VM Rapid offers superior drying-out characteristics for quick curing, allowing for pointing/grouting in 3 to 4 hours. Mapebond VM Rapid does not contribute to efflorescence. It exceeds ANSI A118.4FT, A118.11 and A118.15FT requirements when mixed with water.

Polymer-Modified Veneer Mortar Mapebond VM is a nonsag mortar designed for the installation of manufactured stone veneer, thin-brick and natural stone in exterior/interior applications. Mapebond VM may be used up to 1/2" (12 mm) in thickness to offer outstanding support and bonding strength. This polymer-modified mortar has a high content of unique dry polymer, resulting in excellent adhesion between the substrate and veneer units. It exceeds ANSI A118.4ET and A118.11 requirements when mixed with water.

Mapebond ™ VM Lite is a nonsag mortar designed for the installation of manufactured stone veneer, thin brick and natural stone in exterior and interior applications. This polymer-modified mortar has a high content of unique dry polymer, resulting in excellent adhesion between the substrate and veneer units. Mapebond VM Lite utilizes Ultralite Technology ™ for twice the coverage of a standard thin-set mortar per pound and contains more than 20% recycled content. It exceeds ANSI A118.4ET, ANSI A118.11 and ANSI A118.15ET requirements when mixed with water.

Mapebond ™ VM Super is a premium, nonsag veneer mortar designed for the installation of manufactured and natural stone veneer as well as thin brick. Suitable for use in exterior/interior commercial and residential installations, this mortar has a high content of unique dry polymer, resulting in excellent adhesion between the substrate and veneer units. It exceeds ANSI A118.4ET, ANSI A118.11 and ANSI A118.15ET requirements when mixed with water.

Waterproofing Sealing Tape for Mapeguard WP 200 Mapeguard WP ST is a fast and easy way to cover seams and wall upturns to provide waterproofing and vapor management protection when installing Mapeguard WP 200 waterproofing sheet membrane for ceramic tile and stone.

Pre-Formed Outside Corners Mapeguard POC is a thin, flexible, alkali-resistant, polyethylene membrane coated on both sides with a nonwoven polypropylene fabric. It offers a fast and easy way to seal outside corners, curbs or return walls in wet areas where walls/curbs and floors meet, providing waterproofing and vapor management protection when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Pre-Formed Inside Corners Mapeguard PIC is a thin, flexible, alkali-resistant, polyethylene membrane coated on both sides with a nonwoven polypropylene fabric. It offers a fast and easy way to seal inside corners in wet areas where walls and floors meet, providing waterproofing and vapor management protection when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Professional, Extra Smooth, Large-and-Heavy-Tile Mortar with Polymer Keraflex Plus is a highly versatile, nonsag/nonslump, large-and-heavy-tile mortar and thin-set mortar for tile and stone installations on floors, walls and countertops. This polymer-modified mortar is formulated with Easy Glide Technology for ease of application and offers excellent adhesion to substrates and tile. It can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Mapeguard ® UM 35 [NA] is an uncoupling, crack-isolation, waterproofing and vapor-management membrane made from high-density polyethylene (HDPE) with a rough surface and polypropylene fabric backing. Mapeguard UM 35 [NA] is designed for installing ceramic and stone tile, including over existing non- cushioned resilient flooring, ceramic tile and stone tile. It is designed to perform over challenging substrates, such as young concrete and single-layer 3/4" (19 mm) plywood subfloors with joist spacing of up to 19.2" (49 cm) on center.

Single-Component, 100%-Solids, Cold-Fluid-Applied, Structural Waterproofing Membrane Planiseal CR1 is a fast-curing, 100%-solids, cold-fluid-applied, single-component, moisture-curing, structural waterproofing membrane that will not shrink and is VOC-compliant in virtually all municipalities. Very low in odor, it is well suited for use in and around occupied spaces. Thanks to advanced proprietary technology, this single-grade membrane can be used in horizontal as well as vertical applications, maximizing versatility. Planiseal CR1 can be applied by roller, brush, trowel or squeegee. Planiseal CR1 is Miami-Dade NOA approved for: Exterior Waterproofing under Porcelain Tiles (System Type F) Planters (System Type F2) Concrete Split Slab Assemblies (System Type F3) The Miami-Dade Notice of Acceptance (NOA) designates that the approved product meets Florida Building Code (FBC) High Velocity Hurricane Zone (HVHZ) requirements. Many coastal municipalities accept or require this NOA in their local building code. Always confirm the most current requirements per the local code.

Premium, Sanded Siliconized Acrylic Caulk Keracaulk S is a premium-grade, sanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Premium, Unsanded Siliconized Acrylic Caulk Keracaulk U is a premium-grade, unsanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Mapesil ® T Plus is a professional-grade, 100%-silicone sealant with enhanced adhesion for use on multiple substrates. This product is specifically formulated for heavy traffic and expansion/movement joints exceeding both ASTM and ANSI standards.

Water-Based, Acrylic Primer for Ultratop Loft Toppings Primer LT [NA] is a low-VOC, water-based acrylic primer that enhances the performance and adhesion between layers of Ultratop Loft toppings for walls and floors. Primer LT [NA] combines excellent versatility with easy, low-odor applications for indoor use.

Low-VOC, Synthetic, Resin-Based Primer for Ultratop® Loft Toppings Primer Grip White [NA] is a ready-to-use, low-VOC, synthetic resin-based primer with bond-promoting silica aggregates suspended in dispersion. It enhances the performance and adhesion of MAPEI’s Ultratop Loft toppings to existing ceramic tile and other difficult-to-bond-to substrates in vertical applications. Suitable for a wide variety of substrates, Primer Grip White [NA] combines excellent versatility with an easy, low-odor application.

Coarse-Textured, Cement-Based Micro-Topping Ultratop Loft F [NA] is a one-component, cement-based decorative topping that is troweled and applied in two layers 1/16" (1.5 mm) in thickness. It is specially formulated for abrasion resistance in designing non-uniform and non-homogeneous finishes with a broad range of coarse-textured finishing effects on indoor decorative surfaces. Ultratop Loft F [NA] can be used on a wide variety of substrates and combines excellent versatility with easy application.

Fine-Textured, Cement-Based Micro-Topping Ultratop Loft W [NA] is a one-component, cement-based decorative topping that is troweled and applied in two layers 1/16" (1.5 mm) in thickness. It is specially formulated for abrasion resistance in designing non-uniform and non-homogeneous finishes with a broad range of finishing effects on indoor decorative surfaces. Ultratop Loft W [NA] can be used on a wide variety of substrates and combines excellent versatility with easy application.

Quick-Setting, Fiber-Reinforced, Cementitious Rendering Mortar Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching and leveling mortar for interior and exterior walls, floors and submerged areas. It can be applied from 1/8" to 1-1/4" (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces. Eliminating the need for a latex additive, Planitop 330 Fast requires only mixing with water to produce a non-sagging mortar that is ready for tile installation in as little as 90 minutes.

Polymer-Modified Thick-Bed and Render Mortar Modified Mortar Bed is a pre-blended, cement-based, polymer-modified thick-bed and render mortar that includes a blend of selected aggregates. Rather than requiring the use of a latex additive, it only needs mixing with water to produce a thick bed mortar of exceptional strength.

Rapid-Setting, Polymer-Modified Sloping Mortar Planislope RS is a rapid-setting, pre-blended, cement-based, polymer-modified mortar that includes a blend of selected aggregates for use in sloping and thick- bed mortar installations. It only needs mixing with water to produce a mortar of exceptional strength. Used for preparing a substrate before the installation of tile and stone, Planislope RS is designed for pre-sloping under waterproofing membranes and mortar beds in showers when quick turnarounds are desired.

Sand and Cement Mortar Mix 4 to 1 is a pre-blended mixture of finely graded sand and Portland cement used for thick-bed mortar installations. 4 to 1 flattens and levels an existing substrate before the installation of tile and stone.

Hybrid-Polymer-Based Adhesive for Gauged Porcelain Tile Ultrabond ECO GPT is a single-component, nonsag, easy-to-trowel, hybrid-polymer-based adhesive technology specially designed for the installation of gauged porcelain tile and gauged porcelain tile panels/slabs on interior/exterior vertical surfaces and countertops. Unique technology advancements are incorporated in the formulation of Ultrabond ECO GPT for delivering instant grab, while allowing for the needed adjustability of panels and large-format tile. Superior bonding performance is complemented with flexibility, deformability and quick-curing characteristics to meet the demands of installing gauged porcelain tile, panels and slabs with application-friendly properties.

Professional Large-and-Heavy-Tile Mortar with Polymer Ultraflex LHT is a non-sag, large-and-heavy-tile mortar and thin-set mortar for large-format and heavy tile and stone for interior/exterior installations on floors, walls and countertops. Ultraflex LHT is designed for use at 1/2" (12 mm) thickness to give better support under large-format tile. This polymer-modified mortar is formulated with Easy Glide Technology for ease of application with excellent adhesion to the substrate and tile.

Standard, Large-and-Heavy-Tile Mortar with Polymer Ultraflex LHT SG is a standard-grade, nonsag, nonslump, polymer-modified, large-and-heavy-tile mortar and thin-set mortar for interior/exterior installations on floors, walls and countertops. It is used to install large-format and heavy tile/stone, including porcelain tile, heavy-ribbed-back tile, brick pavers, dimensional tile and natural-stone tile. Ultraflex LHT SG is designed for use at 3/32" to 1/2" (2.5 to 12 mm) thickness to give better support under large-format tile. This mortar is formulated with Easy Glide Technology for ease of application and good adhesion to the substrate and tile.

Professional, Large-and-Heavy-Tile Mortar with Polymer Large-Format Floor & Wall Tile Mortar is a polymer-enriched (“modified”) mortar ideal for installing large-format tile on floors, walls and countertops. This large-and-heavy-tile mortar is designed to bond and support large tile over a diverse range of substrates.

Large Tile & Stone Mortar is a premium, regular-setting, polymer-enriched (“modified”) large-and-heavy-tile mortar that is ideal for installing large-format tile and stone on floors, walls and countertops. This mortar can also be used in thin-set applications to install smaller-format tile over a diverse range of substrates. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions.

Ultraflex ® LFT ™ is a premium, nonsag, large-and-heavy-tile mortar and thin-set mortar designed for large-format and heavy tile and stone for interior/exterior floor, wall and countertop installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions. It is formulated with Easy Glide Technology ™ for ease of application.

High-Gloss, Film-Forming Protective Coating for Concrete Mapecrete Protector FF is a film-forming, high-gloss protective coating designed to increase the stain resistance of interior, polished or hard-troweled concrete floors.

High-Performance, Self-Leveling Concrete Topping Ultratop [NA] is a self-leveling, self-curing, sealed or polished topping that is specially formulated for fast-track resurfacing of horizontal wear surfaces.

Very Low-Viscosity, Epoxy Injection Resin for Crack Repair Epojet LV [NA] is a moisture-tolerant, two-component, 100%-solids, very low-viscosity, epoxy injection resin that deeply penetrates as well as seals dry and damp hairline, non-dynamic cracks. Epojet LV [NA] may be applied by pressure injection or gravity feed, and can also be combined with sand to become an epoxy mortar.

Two-Component, Clear, Matte, Aliphatic Polyurethane Coating Mapefloor Finish 58 W [NA] is a two-component, aliphatic polyurethane coating in water dispersion with a clear, matte finish. Mapefloor Finish 58 W [NA] provides a high-performance finish on general-service resinous flooring products and Ultratop [NA] systems.

Two-Component, Clear Protective Acrylic Coating for Floors Mapefloor Finish 630 [NA] is a two-component, protective, acrylic filming agent in a water dispersion for floors made from concrete and Ultratop systems. Mapefloor Finish 630 [NA] provides a high-performance finish on Ultratop systems.

High-Performance, Polishable, Self-Leveling Topping for a Fine-Aggregate Finish Ultratop SP is a polishable, self-leveling, cementitious topping that provides a fine-aggregate exposed finish. Ultratop SP is engineered for fast-track resurfacing of horizontal wear surfaces.

Coarse-Textured, Cement-Based Micro-Topping Ultratop Loft F [NA] is a one-component, cement-based decorative topping that is troweled and applied in two layers 1/16" (1.5 mm) in thickness. It is specially formulated for abrasion resistance in designing non-uniform and non-homogeneous finishes with a broad range of coarse-textured finishing effects on indoor decorative surfaces. Ultratop Loft F [NA] can be used on a wide variety of substrates and combines excellent versatility with easy application.

One-Component, Clear, Water-Based Acrylic Basecoat for Mapefloor Finish Topcoats Ultratop Base Coat [NA] one-component, acrylic agent in water dispersion is used as a basecoat before applying a Mapefloor Finish topcoat over Ultratop and Ultratop Loft products. Ultratop Base Coat [NA] used with Mapefloor Finish provides a high-performance finish.

Fine-Textured, Cement-Based Micro-Topping Ultratop Loft W [NA] is a one-component, cement-based decorative topping that is troweled and applied in two layers 1/16" (1.5 mm) in thickness. It is specially formulated for abrasion resistance in designing non-uniform and non-homogeneous finishes with a broad range of finishing effects on indoor decorative surfaces. Ultratop Loft W [NA] can be used on a wide variety of substrates and combines excellent versatility with easy application.

Clear, Matte, Protective Wax for Ultratop and Ultratop Loft Systems Mapelux Opaca [NA] is a one-component, matte wax used as wear protector over MAPEI sealers permitted for Ultratop systems and Ultratop Loft systems only.

Epojet ™ [NA] is a high-strength, two-component, 100%-solids, low-viscosity, epoxy resin for pressure injection and sealing of cracks in structural concrete, masonry and wood.

Primer SN ™ [NA] is a two-component, filled, epoxy primer specifically designed to enhance adhesion of cementitious flooring systems and multilayer resin flooring, such as MAPEI’s Mapefloor ™ products, Ultratop ® products, PlaniLevel ™ products and Planitop EL multilayer epoxy resin flooring systems and multilayer traffic deck systems.

One-Component, Fast-Setting, Fiber-Reinforced, Vertical and Overhead Repair Mortar Planitop X is a one-component, fiber-reinforced, shrinkage-compensated, high-early-strength, fast-setting, polymer-modified, high-build cementitious repair mortar with a corrosion inhibitor.

Very Rapid-Hardening Repair Mortar Planitop 18 is a very rapid-hardening repair mortar that exhibits high early strength and provides quick return to service.

Self-Consolidating Concrete Mix with Corrosion Inhibitor Planitop 11 SCC is a one-component, cementitious, self-consolidating concrete mix with silica fume and a corrosion inhibitor for full-depth structural concrete repairs in above-, below- and on-grade applications.

Very Rapid-Hardening Repair Mortar with Extended Working Time Planitop 18 ES is a one-component, high-early-strength, cementitious repair mortar, with a corrosion inhibitor, that has the very rapid-hardening characteristics of Planitop 18 but with an extended set and working time.

Sulfate-Resistant, Vertical, Overhead and Horizontal Repair Mortar with Silica Fume Planitop 12 SR is a sulfate-resistant, one-component, shrinkage-compensated, cementitious repair mortar. Planitop 12 SR is fiber-reinforced, contains both silica fume and a corrosion inhibitor, and is intended for the repair of vertical, overhead and horizontal concrete surfaces.

Medium-Build, Two-Component, Fast-Setting Mortar Mapecem 202 is a two-component, shrinkage-compensated, polymer-modified, fast-setting cementitious mortar with a corrosion inhibitor.

Pre-Extended, Pumpable and Pourable Concrete Mix Planitop 11 is a one-component, pre-extended, cementitious, pumpable and pourable concrete mix for full-depth concrete repairs in above-, below- and on-grade applications. Designed for large-volume repairs with application thicknesses from 1" (2.5 cm) to full depth, Planitop 11 is suitable for form-and-pour and form-and-pump applications. It is ideal for repairs on horizontal, vertical and overhead surfaces in applications such as tunnels, bridges, dams, parking garages, balcony edges and columns.

Planitop ® 23 is a two-component, fast-setting, polymer-modified, thixotropic, fiber-reinforced cementitious repair mortar with a corrosion inhibitor. Planitop 23 is intended for vertical and overhead repairs, and contains silica fume to provide a durable, high-strength mortar in these applications.

Surface-Applied Corrosion Inhibitor Mapeshield CI 100 is a surface-applied corrosion inhibitor designed to penetrate concrete and protect embedded steel reinforcement. Mapeshield CI 100 delays the corrosion process and reduces overall corrosion activity.

Mapefer ™ 1K [NA] is a one-component, anti-corrosion coating based on unique polymers, cementitious binders and corrosion inhibitors. Mapefer 1K [NA] is specially formulated for application on properly prepared reinforcing steel to inhibit oxidation and rust formation. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions.

Pure Zinc Galvanic Anode Mapeshield I is a pure zinc anode for cathodic protection of reinforcing steel against corrosion in new, reinforced structures as well as structures requiring repair.

Flexible, Cementitious Membrane for Waterproofing and Protecting Concrete and Masonry Mapelastic is a two-component cementitious membrane that waterproofs concrete and masonry. It also offers protection against chemical attack from de-icing salts, sulfates, chlorides and carbon dioxide.

Planitop ® 15 is a one-component, shrinkage-compensated, cementitious, fiber-reinforced, fluid mortar. Planitop 15 contains a corrosion inhibitor and silica fume, and is well-suited for form-and-pour and form-and-pump applications where high early strength and flowability are required.

Planitop ® XS is an extended-working-time variation of Planitop X . Shrinkage-compensated, fiber-reinforced, polymer-modified and containing a corrosion inhibitor, Planitop XS features Planitop X ’s outstanding workability and versatility. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions.

Three-Component, Cementitious Corrosion Inhibitor and Bonding Agent Planibond 3C is a three-component, cementitious, moisture-tolerant, water-based, epoxy-modified corrosion inhibitor and bonding agent.

Water-Based, 40%-Silane, Penetrating Water Repellent Planiseal WR 40 is a water-based, 40%-silane, penetrating water repellent and sealer designed to protect concrete and masonry against moisture/chloride intrusion.

Penetrating, Water-Based, Silane/Siloxane Water Repellent Planiseal WR is a silane/siloxane-blend, water-repellent, transparent sealer that provides resistance to water, dirt and chlorides.

High-Performance Concrete Resurfacer Concrete Renew is a one-component, polymer-modified, cementitious material for the resurfacing of existing concrete to provide a like-new look to concrete surfaces.

Single-Component, 100%-Solids, Cold-Fluid-Applied, Structural Waterproofing Membrane Planiseal CR1 is a fast-curing, 100%-solids, cold-fluid-applied, single-component, moisture-curing, structural waterproofing membrane that will not shrink and is VOC-compliant in virtually all municipalities. Very low in odor, it is well suited for use in and around occupied spaces. Thanks to advanced proprietary technology, this single-grade membrane can be used in horizontal as well as vertical applications, maximizing versatility. Planiseal CR1 can be applied by roller, brush, trowel or squeegee. Planiseal CR1 is Miami-Dade NOA approved for: Exterior Waterproofing under Porcelain Tiles (System Type F) Planters (System Type F2) Concrete Split Slab Assemblies (System Type F3) The Miami-Dade Notice of Acceptance (NOA) designates that the approved product meets Florida Building Code (FBC) High Velocity Hurricane Zone (HVHZ) requirements. Many coastal municipalities accept or require this NOA in their local building code. Always confirm the most current requirements per the local code.

High-Performance, Self-Leveling Concrete Topping Ultratop [NA] is a self-leveling, self-curing, sealed or polished topping that is specially formulated for fast-track resurfacing of horizontal wear surfaces.

Very Low-Viscosity, Epoxy Injection Resin for Crack Repair Epojet LV [NA] is a moisture-tolerant, two-component, 100%-solids, very low-viscosity, epoxy injection resin that deeply penetrates as well as seals dry and damp hairline, non-dynamic cracks. Epojet LV [NA] may be applied by pressure injection or gravity feed, and can also be combined with sand to become an epoxy mortar.

Epojet ™ [NA] is a high-strength, two-component, 100%-solids, low-viscosity, epoxy resin for pressure injection and sealing of cracks in structural concrete, masonry and wood.

Mapefer ™ 1K [NA] is a one-component, anti-corrosion coating based on unique polymers, cementitious binders and corrosion inhibitors. Mapefer 1K [NA] is specially formulated for application on properly prepared reinforcing steel to inhibit oxidation and rust formation. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions.

Pure Zinc Galvanic Anode Mapeshield I is a pure zinc anode for cathodic protection of reinforcing steel against corrosion in new, reinforced structures as well as structures requiring repair.

Cement-Based, Waterproofing and Surface-Preparation Coating Planiseal 88 is a one-component, polymer-modified, cementitious coating for waterproofing, including masonry surfaces, at a maximum depth of 10 feet (3,05 m). Planiseal 88 is also used as a surface-preparation product for MAPEI waterproofing products.

Three-Component, Cementitious Corrosion Inhibitor and Bonding Agent Planibond 3C is a three-component, cementitious, moisture-tolerant, water-based, epoxy-modified corrosion inhibitor and bonding agent.