Back

Ultracolor Plus FA

The world’s best-selling grout, now with CO₂ emissions fully offset in the entire life cycle

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts

Ultracolor Plus FA – with DropEffect technology and CO₂ emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption. to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

Where to Buy Info on co₂ fully offset

MAPEI promotes the total offsetting of residual CO₂ emissions during the life cycle of products by acquiring certified environmental credits to support the implementation of renewable energy and reforestation projects.

CO₂ emissions measured throughout the life cycle of products from the Zero line in 2025, using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of third-party-certified carbon credits in support of renewable energy and forestry protection projects. A commitment to the planet, to people and to biodiversity. For more details on how emissions are calculated and on climate-mitigation projects that are financed through certified carbon credits, click here.

Color palette

5001 Alabaster

5002 Pewter

5004 Bahama Beige

5005 Chamois

5006 Harvest

5007 Chocolate

5009 Gray

5010 Black

5011 Sahara Beige

5014 Biscuit

5015 Bone

5019 Pearl Gray

5027 Silver

5038 Avalanche

5039 Ivory

5042 Mocha

5044 Pale Umber

5047 Charcoal

5049 Light Almond

5077 Frost

5079 Cocoa

5093 Warm Gray

5101 Rain

5103 Cobblestone

5104 Timberwolf

5105 Driftwood

5107 Iron

5220 Eggshell (formerly White)

5221 Moonbeam (New)

5222 Honey Butter (New)

5223 Oatmeal (New)

5224 Wicker (New)

5225 Sandstorm (New)

5226 Nutmeg (New)

5227 Castle Wall (New)

5228 Cavern Moss (New)

5229 Sea Salt (New)

5230 Armor (New)

5231 Deep Ocean (New)

Last projects with Ultracolor Plus FA

Show all projects with Ultracolor Plus FA

Ultracolor Plus FA is part of the lines:

Manufactured Stone Veneer Systems - Pointing Mortar and Grout

Products for the Marine Industry - Grouts

FAQs

Why does Ultracolor Plus FA sometimes bleed and come out when I rub my finger on it?

This indicates that too much water may have been used either in the mix or the cleaning process.

What colors is Ultracolor Plus FA available in?

It is offered in 40 colors, which can be viewed on our Website.

Learn more

Can I mix a small amount of Ultracolor Plus FA?

Yes, it is important to dry blend the bag first prior to mixing small batches. Small batch mixing ratio is 3:1 powder to water.

Grout Calculator

How much working time do I have with Ultracolor Plus FA?

Once the grout has been mixed, you have 30 minutes to one hour of pot life.

Learn more

Can I use Ultracolor Plus FA with glass tile?

Yes, but keep in mind Ultracolor Plus FA has fine sand in it, so you may want to perform a mockup first to make sure it doesn’t scratch the tile.

More on Glass Tiles

What size of grout joints can be used with Ultracolor Plus FA?

1/16" to 3/4"

Grout Calculator

How soon can I use my shower after grouting?

24 to 48 hours

Why did my grout dry lighter than the color I purchased?

There can be different explanations of why this happened. The grout may have been washed too soon or too much during the cleaning process, causing pigment to be removed from the grout. Or, the grout powder may not have been dry-blended before mixing in order to avoid color variation.

Learn More

What is BioBlock technology?

Products identified with MAPEI's BioBlock logo have been developed in such a way that they do not support mold/mildew/fungi growth after product installation, as certified by external laboratories per industry standard ASTM G21: Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi. Common cleaning and maintenance practices are still needed.

Learn More

What is the advantage of using BioBlock products?

For homeowners and building owners, the advantage is after installation. MAPEI’s BioBlock products will not support the growth of mold/mildew/fungi – with adequate cleaning and maintenance practices.

The advantage for contractors and installers is that MAPEI’s BioBlock products do not support the growth of mold/mildew/fungi – with adequate cleaning and maintenance. Therefore, their use can increase the life of an installation, resulting in fewer callbacks for installers and contractors.

Learn more

How many products incorporate BioBlock technology?

Since the introduction of the BioBlock logo in 2003, MAPEI has continued to develop and expand the range and depth of products that include this technology. The list of MAPEI products that carry the BioBlock logo is evolving with the technology and is constantly growing. Look for these innovative products across the following categories: Liquid membranes, adhesives, sealants, caulks, mortars, grouts and finishes.

Learn more

What is the ASTM G21 test and how does it work?

ASTM G21 is an industry standard that uses an intensive testing protocol for determining if fungi, including mold and mildew, can grow on a polymeric material. MAPEI uses a third-party lab and the ASTM G21 standard for testing the antifungal effectiveness of MAPEI products containing polymer that incorporate BioBlock technology. The ASTM G21 test uses a mix of mold and mildew spores that are commonly found in household environments. Product samples are placed on nutrient-containing plates and sprayed with a mixture of these fungi. For 28 days, the test plates are kept at a constant temperature of 84.2°F (29°C) and exposed to high humidity, which are excellent conditions for fungal growth. The samples are then examined for fungal growth. If no growth is present, the product is considered to not support mold/mildew/fungal growth.

Learn more

View all faqs

Ultracolor Plus FA

The world’s best-selling grout, now with CO₂ emissions fully offset in the entire life cycle