Video Library

Premium Epoxy Grout and Mortar with Color-Coated Quartz Kerapoxy CQ is an improved, two-component, 100%-solids epoxy grout and mortar that is non-sagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock ® technology to help protect against mold and mildew.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts Ultracolor Plus FA with DropEffect™ technology is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

Ready-to-Use Grout with Color-Coated Quartz MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.

High-Performance, Rapid-Setting Grout with Maximized Color Depth and Color Consistency Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect™ technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

High-Moisture-Resistant Skimcoat and Embossing Leveler Planiprep 4 LVT is a premixed, high-moisture-resistant, water-based, acrylic-resin-based skimcoat and embossing leveler.

Moisture-Resistant, Fast-Drying Patch and Skimcoating Compound Planiprep PSC is a fast-drying, cement-based, fiber-reinforced, polymer-modified patch and skimcoating compound designed for preparing concrete and wood substrates for flooring installation.

All-Purpose Primer for Self-Leveling Underlayments Primer T is a low-VOC, magenta-colored, water-based acrylic primer that enhances the performance and adhesion of self-leveling underlayments (SLUs) on nonporous and porous substrates. Suitable for a wide variety of substrates, Primer T combines excellent versatility with easy, low-odor application.

High-flow, self-leveling compound Novoplan HFL is a self-leveling, calcium-aluminate-based underlayment and repair mix for interior concrete and engineer-approved floors with high-flow characteristics.

Polymer-Modified Thick-Bed and Render Mortar Modified Mortar Bed is a pre-blended, cement-based, polymer-modified thick-bed and render mortar that includes a blend of selected aggregates. Rather than requiring the use of a latex additive, it only needs mixing with water to produce a thick bed mortar of exceptional strength.

Premium, Large-and-Heavy-Tile Mortar with Polymer Ultraflex LFT is a premium, non-sag, large-and-heavy-tile mortar and thin-set mortar designed for large-format and heavy tile and stone for interior/exterior floor, wall and countertop installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. It is formulated with Easy Glide Technology™ for ease of application.

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts Ultracolor Plus FA with DropEffect™ technology is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

100%-Silicone Sealant for Heavy Traffic and Movement Joints Mapesil T is a professional-grade, 100%-silicone sealant for use on multiple substrates. This product is specifically formulated for heavy traffic and expansion/movement joints and meets ASTM standards.

Moisture-Control Membrane, Adhesive Isolator, Sealer, pH Blocker and Primer Planiseal MSP is a two-coat, high-solids, polymer-based adhesive isolator, sealer, moisture-control membrane and self-leveling primer. Planiseal MSP protects flooring installations against subfloor moisture and pH in concrete slabs with moisture vapor emission rates (MVERs) up to 15 lbs. (6.80 kg) per ASTM F1869, relative humidity (RH) up to 99% per ASTM F2170 and alkalinity protection up to pH of 12. Planiseal MSP eliminates the need for a secondary primer for self-leveling applications.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

For Use With Mapelastic ® AquaDefense MAPEI’s Reinforcing Fabric is a strong, absorbent, flexible, alkali-resistant, polyester reinforcing fabric for optional use with MAPEI’s Mapelastic AquaDefense when installed under ceramic tile or stone on residential and commercial interior applications. Reinforcing Fabric is also for use as a component in MAPEI’s ShowerPerfect ™ shower installation systems. Reinforcing Fabric is ideal for use over substrate areas such as cracks, coves, corners and areas around drains when used with Mapelastic AquaDefense . Reinforcing Fabric provides a durable, reliable barrier to water migration into adjacent areas. It can easily be cut to size with scissors or a razor knife, and has excellent compatibility with all MAPEI cement- or epoxy-based grouts and mortars.

Premium Waterproofing and Crack-Isolation Membrane Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional Reinforcing Fabric or Mapeband ™ accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10 and ANSI A118.12 standards.

For Use With Mapelastic ® AquaDefense MAPEI’s Reinforcing Fabric is a strong, absorbent, flexible, alkali-resistant, polyester reinforcing fabric for optional use with MAPEI’s Mapelastic AquaDefense when installed under ceramic tile or stone on residential and commercial interior applications. Reinforcing Fabric is also for use as a component in MAPEI’s ShowerPerfect ™ shower installation systems. Reinforcing Fabric is ideal for use over substrate areas such as cracks, coves, corners and areas around drains when used with Mapelastic AquaDefense . Reinforcing Fabric provides a durable, reliable barrier to water migration into adjacent areas. It can easily be cut to size with scissors or a razor knife, and has excellent compatibility with all MAPEI cement- or epoxy-based grouts and mortars.

Premium Waterproofing and Crack-Isolation Membrane Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional Reinforcing Fabric or Mapeband ™ accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10 and ANSI A118.12 standards.

Heavy-Duty, Pressure-Sensitive, Multi-Flooring Adhesive Ultrabond ECO 399 is a high-moisture-resistant, heavy-rolling-load-resistant, aggressive, pressure-sensitive adhesive with enhanced dimensional control properties designed to install a wide variety of resilient flooring types.

UltraCare Concentrated Tile & Grout Cleaner is a highly concentrated neutral cleaner with a lemon scent for everyday use. When used regularly and per the directions, this biodegradable, neutral cleaner helps to maintain a variety of ceramic, porcelain and natural-stone surfaces as well as grout in pristine condition. In addition, it helps to prevent soap scum buildup and hard-water deposits.

UltraCare Heavy-Duty Stone, Tile & Grout Cleaner is a highly concentrated and high-alkaline cleaner and degreaser. This product is formulated to quickly remove most waxes, grease, oil, light soap scum, and stains from mildew and algae. It is quite effective at removing most factory-applied waxes and floor finishes, and is ideal for areas that have been neglected or subject to heavy use.

For Use With Mapelastic ® AquaDefense MAPEI’s Reinforcing Fabric is a strong, absorbent, flexible, alkali-resistant, polyester reinforcing fabric for optional use with MAPEI’s Mapelastic AquaDefense when installed under ceramic tile or stone on residential and commercial interior applications. Reinforcing Fabric is also for use as a component in MAPEI’s ShowerPerfect ™ shower installation systems. Reinforcing Fabric is ideal for use over substrate areas such as cracks, coves, corners and areas around drains when used with Mapelastic AquaDefense . Reinforcing Fabric provides a durable, reliable barrier to water migration into adjacent areas. It can easily be cut to size with scissors or a razor knife, and has excellent compatibility with all MAPEI cement- or epoxy-based grouts and mortars.

Premium Waterproofing and Crack-Isolation Membrane Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional Reinforcing Fabric or Mapeband ™ accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10 and ANSI A118.12 standards.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

Ready-to-Use Grout with Color-Coated Quartz MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.

Fast-Curing, Silane-Modified Polymer Adhesive Ultrabond ECO 907 is a fast-curing, 100%-solids, moisture-curing, gun-grade adhesive designed for basic wood subfloor construction practices as well as repairing of wood flooring; bonding of wood stair nosings; installation of wood molding and baseboards; and attachment of tackstrips to concrete subfloors. Ultrabond ECO 907 is also ideal for supplemental bonding of wide plank boards when nailing and gluing are required.

Fast-Set Urethane Adhesive for Hardwood Flooring Ultrabond ECO 977 is a fast-setting, 100%-solids, one-component, moisture-cured urethane adhesive specifically designed for the installation of domestic solid and engineered wood flooring. Ultrabond ECO 977 can also be used in elevated subfloor moisture conditions of up to 12 lbs. (5,44 kg) MVER and 95% relative humidity when a specific installation method and trowel notch configurations are used.

One-Component, Polyurethane Moisture Barrier and Bonding Agent Planiseal PMB is a one-component, moisture-curing, polyurethane compound designed to provide moisture vapor emission protection on damp concrete substrates in a single- or double-coat application method as well as a vapor retarder using a single-coat method over wood substrates. It also serves as a bonding agent and moisture barrier system for self-leveling underlayments when applied in a double-coat method with dry sand.

Deep-Pour, Self-Leveling Compound Novoplan DPL is a self-leveling, calcium-aluminate-based underlayment and repair mix for interior concrete and engineer-approved floors and is capable of being placed up to 4" (10 cm) in a single lift.

High-flow, self-leveling compound Novoplan HFL is a self-leveling, calcium-aluminate-based underlayment and repair mix for interior concrete and engineer-approved floors with high-flow characteristics.

Structural Epoxy Putty Adhesives for Use with Structural Strengthening Systems MapeWrap 11 and MapeWrap 12 are two-component, 100%-solids, moisturetolerant, structural epoxies used as adhesives for the Carboplate® composite system. MapeWrap 11 and MapeWrap 12 are also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod™ C laminates.

Medium-Viscosity, 100%-Solids Epoxy Resin for Impregnation of MapeWrap Fabrics MapeWrap 31 is a 100%-solids, moisture-tolerant, medium-viscosity epoxy resin used for impregnating MapeWrap composite system fabrics by a dry layup method. MapeWrap 31 was specially developed to saturate and encapsulate carbon and glass fiber fabrics and to cure to a high-performance laminate. Once cured, MapeWrap 31 provides high mechanical strength properties.

Structural Epoxy Putty Adhesives for Use with Structural Strengthening Systems MapeWrap 11 and MapeWrap 12 are two-component, 100%-solids, moisturetolerant, structural epoxies used as adhesives for the Carboplate® composite system. MapeWrap 11 and MapeWrap 12 are also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod™ C laminates.

Low-Viscosity, 100%-Solids, Epoxy Resin for Impregnation of MapeWrap Fabrics MapeWrap 21 is a 100%-solids, moisture-tolerant, low-viscosity, epoxy resin used to encapsulate the MapeWrap composite system fabrics. MapeWrap 21 was specially developed to saturate and encapsulate carbon and glass fiber fabrics and to cure to a high-performance laminate. Once cured, the laminate provides additional strength to appropriate structural elements.

Low-Viscosity, 100%-Solids, Epoxy Resin Primer for the MapeWrap Composite System MapeWrap Primer 1 is a 100%-solids, moisture-tolerant, low-viscosity, two-component, epoxy resin that is used as a seal coat for consolidating and priming concrete substrates. As the first component of the MapeWrap composite system, MapeWrap Primer 1 penetrates cementitious pore structures and provides a high bond for the other system components.

For Cold Lead Damage to Mapeheat Mat and Mapeheat Cable Mapeheat Lead Wire Repair Kit contains all materials needed to repair a damaged cold lead for Mapeheat Cable , Mapeheat Mat standard sizes or Mapeheat Mat custom sizes. The kit is available in 120 V and 240 V versions. The repair kit’s voltage (120 V or 240 V) must match the voltage of the damaged cold lead.

Radiant-Heating Cable for Use with Mapeheat Membrane Mapeheat Cable is a free-form, twisted-pair, floor-heating cable for use in any residential interior room where the comfort of radiant floor heating is desired. The cable can be spaced on site to provide 10, 12 or 15 W per sq. ft. based on the desired wattage output requirements of the installation. Mapeheat Cable is available in 33 lengths to accommodate areas as small as 6 sq. ft. (0.56 m²) and up to 293 sq. ft. (27.2 m²).

Pre-Wired, Floor-Heating Fabric Mapeheat Mat is a pre-wired floor-heating fabric designed for easy installation. The pre-wiring aspect of Mapeheat Mat guarantees even heat distribution because the heating wires embedded within the fabric are evenly spaced during production. A single standard-size mat can provide adequate floor-heat coverage for most standard bathroom and living areas. Installers can also combine multiple standard mats to heat the desired area. When full coverage cannot be achieved with standardsize mats (such as areas with curves, angles or obstructions), Mapeheat Mat can be customized to provide optimal coverage.

Snap-Together Cable Guides for Customizable Radiant-Heated Floors Mapeheat Cable Guides are used to secure Mapeheat Cable to a substrate before installation of floor-covering materials (tile, stone, laminate, engineered wood or luxury vinyl flooring). Mapeheat Cable Guides can be attached to a wooden subfloor with nails or screws, and to a concrete subfloor with hot glue.

Sensing Probe for Thermostat-Controlled Radiant-Heated Floors Mapeheat Temperature Sensing Probe is designed for use with Mapeheat Thermo Connect , Mapeheat Thermo Touch and Mapeheat Thermo Basic thermostats. Use this replacement product if the probe that accompanies a Mapeheat thermostat is misplaced or if an additional probe is desired. Note that the temperature-sensing probe must be installed before installation of the finished flooring.

For Damage to Mapeheat Mat Mapeheat Mat Repair Kit contains all materials needed to repair Mapeheat Mat that has been damaged.

For Damage to Mapeheat Cable Mapeheat Cable Repair Kit contains all materials needed to repair Mapeheat Cable that has been damaged.

Electrical Fault Indicator for Mapeheat Floor Heating Mapeheat Fault Sensor simultaneously monitors the hot, neutral and ground wires during installation of Mapeheat radiant-floor-heating products.

Clean and Polish for Wood Floors Ultracoat Clean Polish is a concentrated product that may be diluted with clean water for regular maintenance or used at full strength for greater protection and appearance. It has been specially developed for the maintenance of interior residential and commercial wooden floors treated with Ultracoat wood-floor finishes. Ultracoat Clean Polish gives floor surfaces a bright, shiny appearance and also increases protection against wear by forming a water-repellent film.

Low-Gloss Clean and Polish for Wood Floors Ultracoat Clean WPM is a concentrated product that may be diluted with clean water for regular maintenance or used at full strength for greater protection and appearance. It has been specially developed for the maintenance of interior residential and commercial wooden floors treated with Ultracoat wood-floor finishes. Ultracoat Clean WPM gives the surface of floors a low-gloss appearance and also increases the protection against wear by forming a water-repellent film.

Concentrated Cleaner for Wood Floors Ultracoat Universal Cleaner is a concentrated detergent specifically formulated for cleaning wood floors coated with either water-based or oil-based finishes.

Concentrated Polish Remover for Wood Floors Ultracoat Polish Remover is a concentrated solution specifically formulated for the removal of wax-based or polymer-based wood-floor polishes.

Two-Component, Water-Based Polyurethane Wood-Flooring Finish Ultracoat HT 2K is a two-component, water-based wood-flooring finish that is available in the gloss levels of natural, matte, satin and semi-gloss. Suitable for use in interior residential and heavy commercial applications where extreme traffic is expected, Ultracoat HT 2K is an aliphatic polyurethane resin system with excellent abrasion resistance for solid, pre-sanded wood floors. Ultracoat HT 2K adds a warm color to the wood and is non-yellowing.

One-Component, Water-Based Polyurethane Wood-Flooring Finish Ultracoat Easy Plus is a one-component, water-based wood-flooring finish that is available in the gloss levels of matte, satin and semi-gloss. Suitable for use in interior residential and light commercial applications, Ultracoat Easy Plus is a self-crosslinking, aliphatic polyurethane resin system with excellent abrasion resistance for solid, pre-sanded wood floors. Ultracoat Easy Plus adds a warm color to the wood and is non-yellowing.

One-Component Sanding Sealer Ultracoat Universal Base is a one-component, rapid-drying, water-based sanding sealer for solid, engineered and exotic wood flooring. Specifically designed to work with Ultracoat water-based finishes, Ultracoat Universal Base seals freshly sanded wood flooring and creates a base layer that isolates the finish coat from penetrating into the open wood surface.

Sawdust Admixture for Crack Filling of Wood Flooring Ultracoat Aqua Plus is a single-component binder that is mixed with sawdust produced during the final sanding process of preparing wood floors, and used to fill voids and cracks before the final application of water-based wood-floor finishing systems. Ultracoat Aqua Plus has extremely high wetting properties, is low in viscosity and forms a high-solids paste with excellent adhesion and workability. After application, the mixture dries quickly and can be sanded easily. The remaining mixture can be stored in a sealed plastic container.

Two-Component, High-Performance Sanding Sealer Ultracoat Premium Base is a two-component, high-performance, water-based sanding sealer for all types of wood flooring – including exotic species – and is specifically designed to work with Ultracoat water-based finishes in high traffic. Ultracoat Premium Base seals freshly sanded wood flooring and creates a base layer that isolates the finish coat from penetrating into the open wood surface.

Premium Epoxy Grout and Mortar with Color-Coated Quartz Kerapoxy CQ is an improved, two-component, 100%-solids epoxy grout and mortar that is non-sagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock ® technology to help protect against mold and mildew.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts Ultracolor Plus FA with DropEffect™ technology is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

Ready-to-Use Grout with Color-Coated Quartz MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.

High-Performance, Rapid-Setting Grout with Maximized Color Depth and Color Consistency Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect™ technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

UltraCare Concentrated Tile & Grout Cleaner is a highly concentrated neutral cleaner with a lemon scent for everyday use. When used regularly and per the directions, this biodegradable, neutral cleaner helps to maintain a variety of ceramic, porcelain and natural-stone surfaces as well as grout in pristine condition. In addition, it helps to prevent soap scum buildup and hard-water deposits.

UltraCare Heavy-Duty Stone, Tile & Grout Cleaner is a highly concentrated and high-alkaline cleaner and degreaser. This product is formulated to quickly remove most waxes, grease, oil, light soap scum, and stains from mildew and algae. It is quite effective at removing most factory-applied waxes and floor finishes, and is ideal for areas that have been neglected or subject to heavy use.

Hybrid-Polymer-Based Adhesive for Gauged Porcelain Tile Ultrabond ECO GPT is a single-component, non-sag, easy-to-trowel, hybridpolymer-based adhesive technology specially designed for the installation of gauged porcelain tile and gauged porcelain tile panels/slabs on interior vertical surfaces and countertops. Unique technology advancements are incorporated in the formulation of Ultrabond ECO GPT for delivering instant grab, while allowing for the needed adjustability of panels and large-format tile. Superior bonding performance is complemented with flexibility, deformability and quick-curing characteristics to meet the demands of installing gauged porcelain tile, panels and slabs with application-friendly properties.

Premium, Highly Deformable, Lightweight, Gauged-Tile Mortar with Polymer MAPEI Ultralite S2 is a premium-grade, lightweight, single-component thin-set mortar that is ideal for installation of gauged (formerly “thin”) porcelain tile. This high-performance, highly deformable, polymer-modified mortar is formulated with Easy Glide Technology™ for ease of application. MAPEI Ultralite S2 features a long open time and superior transfer properties to enhance back-buttering, and can be used also for ceramic tile and stone. MAPEI Ultralite S2 ’s unique Ultralite Technology™ provides twice the coverage of a standard thin-set mortar per pound/kg and may contribute to LEED points with 20% recycled content.

Premium, Extra Smooth, Large-and-Heavy-Tile Mortar with Polymer Keraflex Super is a highly versatile, non-sag/nonslump, large-and-heavy-tile mortar and thin-set mortar for tile and stone for installations on floors, walls and countertops. This polymer-modified mortar has a high content of a unique dry polymer, resulting in excellent adhesion to the substrate and tile, with enhanced resistance to freeze/thaw environments. It is formulated with Easy Glide Technology™ for ease of application and with a consistency that allows adjustability when used with lippage control systems. Keraflex Super can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Structural Epoxy Putty Adhesives for Use with Structural Strengthening Systems MapeWrap 11 and MapeWrap 12 are two-component, 100%-solids, moisturetolerant, structural epoxies used as adhesives for the Carboplate® composite system. MapeWrap 11 and MapeWrap 12 are also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod™ C laminates.

Medium-Viscosity, 100%-Solids Epoxy Resin for Impregnation of MapeWrap Fabrics MapeWrap 31 is a 100%-solids, moisture-tolerant, medium-viscosity epoxy resin used for impregnating MapeWrap composite system fabrics by a dry layup method. MapeWrap 31 was specially developed to saturate and encapsulate carbon and glass fiber fabrics and to cure to a high-performance laminate. Once cured, MapeWrap 31 provides high mechanical strength properties.

Structural Epoxy Putty Adhesives for Use with Structural Strengthening Systems MapeWrap 11 and MapeWrap 12 are two-component, 100%-solids, moisturetolerant, structural epoxies used as adhesives for the Carboplate® composite system. MapeWrap 11 and MapeWrap 12 are also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod™ C laminates.

Low-Viscosity, 100%-Solids, Epoxy Resin for Impregnation of MapeWrap Fabrics MapeWrap 21 is a 100%-solids, moisture-tolerant, low-viscosity, epoxy resin used to encapsulate the MapeWrap composite system fabrics. MapeWrap 21 was specially developed to saturate and encapsulate carbon and glass fiber fabrics and to cure to a high-performance laminate. Once cured, the laminate provides additional strength to appropriate structural elements.

High-Strength, Bi-Directional E-Glass Fiber Fabric MapeWrap G Bi-Ax is a high-strength, bi-directional glass fiber fabric in which the primary fibers are oriented in the 0°/90° directions. When used with the MapeWrap family of two-component epoxy adhesives, MapeWrap G Bi-Ax forms an externally bonded fiber-reinforced polymer (FRP) reinforcement system engineered to increase the strength of existing structural elements. When applied to the surface of structural members in buildings, parking garages, bridges, marine piles and other structures, MapeWrap G Bi-Ax contributes significant strength with minimal increase to the dead load supported by the structure, particularly in seismic applications.

Balanced, High-Strength, Bi-Directional Carbon Fiber Fabric Mapewrap C Bi-Ax is a bi-directional carbon fiber fabric with balanced weight and having a high modulus of elasticity and high tensile strength. Mapewrap C Bi-Ax is suitable for repairing concrete structures and for improving the flexural and shear strength of reinforced concrete elements. It is also used for the confinement of axial-loaded elements (columns, bridge piers, chimneys) subjected to compressive and bending stress, and for seismic strengthening in earthquake areas. MapeWrap C Bi-Ax is installed using the “wet-layup” system where the fabric is saturated immediately before placement and the “dry-layup” system where the fabric is saturated during application. A Technical Data Sheet is not yet available for this product. For technical data, please consult your sales representative.

Uni-Directional Carbon Fiber Fabric MapeWrap C Uni-Ax 300 is a high-strength, uni-directional carbon fiber fabric that, when used with the MapeWrap family of two-component epoxy adhesives, forms an externally bonded fiber-reinforced polymer (FRP) reinforcement system engineered to increase the strength of existing structural elements. MapeWrap C Uni-Ax 300 is applied to the surface of structural members in buildings, parking garages, bridges, marine piles and other structures to contribute significant strength, without increasing the dead load supported by the structure.

High-Strength, Uni-Directional Carbon Fiber Fabric MapeWrap C Uni-Ax 600 is a high-strength, uni-directional carbon fiber fabric that, when used with the MapeWrap family of two-component epoxy adhesives, forms an externally bonded fiber-reinforced polymer (FRP) reinforcement system. MapeWrap C Uni-Ax 600 is part of an engineering solution that allows for an increase in the strength of structural elements without increasing the dead load supported by the structure.

Low-Viscosity, 100%-Solids, Epoxy Resin Primer for the MapeWrap Composite System MapeWrap Primer 1 is a 100%-solids, moisture-tolerant, low-viscosity, two-component, epoxy resin that is used as a seal coat for consolidating and priming concrete substrates. As the first component of the MapeWrap composite system, MapeWrap Primer 1 penetrates cementitious pore structures and provides a high bond for the other system components.

Water-Based Primer for MAPEI Peel-and-Stick Membranes MAPEI SM Primer is a ready-to-use, fast-drying, water-based, latex primer for use under MAPEI’s peel-and-stick sheet membranes on residential and commercial indoor or outdoor floors. MAPEI SM Primer greatly increases the bond of MAPEI’s peel-and-stick sheet membranes to concrete, plywood and other approved, properly prepared floors. It can be applied with a roller or brush, is white in color and dries clear.

All-in-One Membrane for Crack Isolation, Sound Reduction, Waterproofing and Vapor Management Mapesonic 2 is a patented, next-generation, flexible, 76-mil thin, lightweight, load-bearing, fabric-reinforced, “peel-and-stick” membrane for sound reduction, crack isolation, waterproofing and vapor management. Application of Mapesonic 2 can be immediately followed by installation of finished flooring. Mapesonic 2 reduces transmission of impact sound (such as footsteps and dropped objects) and airborne sound (such as voice and TV) through floors when installed under ceramic tile, stone, vinyl and wood floorings. It also helps to prevent existing or future in-plane floor cracks (with movement up to 3/8" or 10 mm wide) from transmitting through grout, ceramic tile and natural-stone assemblies.

Fast-Tacking, Water-Based Primer for MAPEI Peel-and-Stick Membranes MAPEI SM Primer Fast is a ready-to-use, fast-drying, quick-tacking, water-based, pressure-sensitive, nonhydrolyzable latex primer for use under MAPEI’s peel-and-stick sheet membranes on residential and commercial indoor or outdoor floors. MAPEI SM Primer Fast greatly increases the bond of MAPEI’s peel-and-stick sheet membranes to concrete, plywood and other approved, properly prepared floors. It can be applied with a roller or brush, is white in color and dries clear.

Professional, Sound-Reduction and Crack-Isolation Sheet Membrane Mapesound 90 is a flexible, thin, 90-mil, lightweight, load-bearing, fabric-reinforced “peel-and-stick” sound-reduction and crack-isolation membrane. After application, ceramic tile or stone can be installed immediately with a recommended MAPEI polymer-modified cement-based mortar, or glue-down wood flooring can be immediately installed with any MAPEI urethane or hybrid-polymer-based wood adhesive. Mapesound 90 reduces transmission of impact sound (footsteps, dropped objects, etc.) and airborne sound (voice, TV, etc.) through floors when installed under ceramic tile, stone or wood floor coverings. It also helps to prevent existing or future in-plane floor cracks (with movement up to 3/8" [10 mm] wide) from transmitting through grout, ceramic tile or natural-stone assemblies.

Water-Based, Interior/Exterior Primer for Sheet Membranes MAPEI HM Primer is a ready-to-use, low-VOC, water-based, quick-drying, high-tack membrane primer. It is specifically formulated to promote maximum adhesion of MAPEI peel-and-stick sheet membranes to high-moisture substrates.

Peel-and-Stick, Crack-Isolation Sheet Membrane for Tile Installations Mapeguard CI is a flexible, thin (1/16" or 1.5 mm), lightweight, load-bearing, fabric-reinforced, “peel-and-stick” crack-isolation membrane. After application, ceramic tile or stone can be installed immediately with approved polymer-modified cement-based mortar. Mapeguard CI helps to prevent existing or future in-plane floor cracks (with movement up to 3/8" or 10 mm wide) from transmitting through grout, ceramic tile or natural stone.

Butyl-Based, Sealing Tape for Use with MAPEI’s Bitumen-Based, Crack-Isolation Membranes Mapetape BB is a butyl-based, waterproofing sealing tape for use with MAPEI peel-and-stick, crack-isolation membranes. Mapetape BB has an extremely aggressive grip and superior long-term adhesion, ensuring immediate sealing upon contact. It is reverse-rolled for easy, fast application. A clear release liner on one side allows for easy handling and dry-fitting. Mapetape BB is compatible with Mapeguard 2 , Mapesonic 2 , Mapesound 90 and Mapeguard CI membranes.

3-in-1 Membrane for Crack Isolation, Waterproofing and Sound Reduction Mapeguard 2 is a next-generation, flexible, thin, 40-mil (1-mm) lightweight, load-bearing, fabric-reinforced “peel-and-stick” crack-isolation, waterproofing and vapor-control membrane. Mapeguard 2 helps to prevent existing or future in-plane floor cracks (with movement up to 3/8" [10 mm] wide) from transmitting through grout, ceramic tile and natural stone. It also reduces the transmission of impact sound (footsteps, dropped objects, etc.) and airborne sound (voice, TV, etc.) through floors when installed under ceramic tile, stone or wood floor coverings.

Premium, Rapid-Setting, Flexible Tile Mortar Granirapid is the industry’s first and most flexible, high-performance, fast-curing mortar system geared for fast-track projects. It develops high, early mechanical strength and can be specified for the most demanding tile applications. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT), Granirapid offers superior drying-out characteristics for quick curing and does not contribute to efflorescence. When installed in conjunction with Ultracolor Plus FA grout, Granirapid will allow water submersion in only 72 hours.

Professional, Cement-Based Waterproofing Membrane Mapelastic 315 is a trowel-applied, flexible, fiber-mesh-reinforced waterproofing and crack-isolation membrane for installation under ceramic tile or stone on indoor/outdoor residential, commercial and industrial intermittent wet or submerged applications. Mapelastic 315 provides an excellent barrier to prevent water from migrating into other areas. Mapelastic 315 is compatible with any polymer-modified cement-based mortar (ANSI A118.4 or better) or epoxy mortar (ANSI A118.3). Mapelastic 315 exceeds ANSI A118.10 requirements for waterproofing and is IAPMO-listed for use as a shower-pan liner.

Professional, Two-Part, Urethane Flooring Adhesive Ultrabond G19 is a two-part, epoxy-modified, polyurethane reactive adhesive specially designed for the installation of floor coverings in high-performance applications in both interior and exterior applications.

High-Modulus Epoxy Bonding Agent Planibond EBA is a two-component, multipurpose, high-modulus epoxy bonding agent. Planibond EBA is nonshrink, 100%-solids and moisture-tolerant. Planibond EBA is used primarily as a bonding agent for screeds and repair mortars.

Premium Epoxy Grout and Mortar with Color-Coated Quartz Kerapoxy CQ is an improved, two-component, 100%-solids epoxy grout and mortar that is non-sagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock ® technology to help protect against mold and mildew.

Pre-Blended, Lightweight, Shrinkage-Compensated, Cement-Based Screed Mortar Mapecem Marine 1000 is an accelerated-cure, lightweight, shrinkage-compensated screed mortar for leveling or sloping up to 2" (5 cm) thick for ship decks before installation of floor coverings or tiles. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT™), Mapecem Marine 1000 offers superior drying-out characteristics for quick curing and does not contribute to efflorescence.

High-Performance, Quick-Setting, Fiber-Reinforced, Self-Leveling Underlayment Ultraplan Marine Fire is a self-leveling, quick-setting, fiber-reinforced underlayment for interior ship decks subject to heavy traffic, and is a component of a soundproof floating floor system. It has high compressive strength and can withstand light foot traffic after 3 hours and vehicular rubber-wheel traffic after 3 days. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT™), Ultraplan Marine Fire offers superior drying-out characteristics for quick curing and does not contribute to efflorescence.

Lightweight, Fiber-Reinforced, Quick-Setting, Self-Leveling Underlayment Ultraplan Marine 900 is a lightweight, fiber-reinforced, quick-setting, self-leveling underlayment for interior decks. It can withstand light foot traffic after 2 to 3 hours and rubber-wheel traffic after 3 days. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT™), Ultraplan Marine 900 offers superior drying-out characteristics for quick curing and does not contribute to efflorescence.

High-Strength, Lightweight, Fiber-Reinforced, Quick-Setting, Self-Leveling Underlayment Ultraplan Marine 1400 is a fiber-reinforced, high-strength, lightweight, quick-setting, self-leveling underlayment for smoothing and leveling interior ship decks, and is a component of a soundproof floating floor system. It can withstand light foot traffic after 3 hours and rubber-wheel traffic after 3 days. Thanks to MAPEI’s High-Hydrated Cement Technology (HCT™), Ultraplan Marine 1400 offers superior drying-out characteristics for quick curing and does not contribute to efflorescence.

Premium, High-Performance Adhesive for Solid Vinyl Sheet, Tile and Plank Ultrabond ECO 360 is a proprietary, high-performance, wet-lay and pressure-sensitive adhesive designed specifically for installing homogeneous and heterogeneous solid vinyl flooring. With its strong, durable, moisture-resistant and alkali-resistant bond, it is ideal for commercial and institutional applications. Ultrabond ECO 360 has an excellent open time, develops strength quickly, performs well under rolling loads and resists indentation. Its low volatile organic content makes it ideal for use in occupied buildings such as hospitals and medical centers.

Ready-to-Use, Translucent Grout with an “Iridescent Effect” Finish MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts Ultracolor Plus FA with DropEffect™ technology is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to Portland-cement grout, such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

Premium Waterproofing and Crack-Isolation Membrane Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional Reinforcing Fabric or Mapeband ™ accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10 and ANSI A118.12 standards.

100%-Silicone Sealant for Heavy Traffic and Movement Joints Mapesil T is a professional-grade, 100%-silicone sealant for use on multiple substrates. This product is specifically formulated for heavy traffic and expansion/movement joints and meets ASTM standards.

Professional, Two-Component, Fast-Set, Urethane Turf Seam Adhesive Ultrabond Turf PU 2K is a high-performance, two-component, fast-set, urethane adhesive designed for the high-performance seaming and direct bonding of synthetic turf used in athletic and landscape applications. Ultrabond Turf PU 2K is particularly suited for use in areas of low ambient relative humidity and in cool temperatures. Ultrabond Turf PU 2K is colored green to blend in with most synthetic turf products and cures within 2 to 4 hours to a tough, durable bond. Ultrabond Turf PU 2K provides seam strengths that exceed FIFA standards.