Products
Back

Complete system for waterproofing existing structures and restoring underground structures with damp in counter-pressure with an anticondensation cycle

Rif n° R2.3

Application steps

1
Masonry
Thoroughly clean the surface of the masonry by hydro-blasting to remove any crumbling areas or areas at risk of becoming detached.
2
Render
Apply a layer of render at least 1 cm. thick with a trowel or rendering machine to level off the surfaces.
3
Waterproofer
Apply two layers of product with a roller to form a total thickness of at least 2 mm.
4
Skimming mortar
Apply a 0.5 cm thick layer of scratch-coat mortar with a trowel or rendering machine to completely cover the substrate.
5
Render POROMAP DEUMIDIFICANTE (minimum 1 cm)
Apply a layer of render at least 1 cm. thick with a trowel or rendering machine.
6
Breathable skimming mortar
Apply the skimming mortar in layers 2 mm thick with a flat metal trowel.
7
Sealant
Elastically seal the contact perimeter between the wall and the floor.
8
Siloxane primer
Apply the product with a brush, roller or by spray to even out the surface and to promote adhesion of the successive coat of paint.
9
Siloxane paint
Once the primer is dry apply the paint with a brush, roller or spray. 2 coats are required to ensure complete, effective hiding.

Documentation

You may be interested in Waterproofing

Keep in touch

Subscribe to our newsletter to get Mapei news

SUBSCRIBE
SUBSCRIBE