Back

Installation of wooden flooring on soundproofing system against footfall noise

Application steps

Discover the application steps, the products used for this solution and other alternative products.

1

Concrete substrate

2

Soundproofing membrane

MAPESILENT PANEL

Place the fabric tiles with the fibrous side (light-coloured) facing down, taking care to install them close up together.

3

Soundproofing band

MAPESILENT BAND R

Apply the soundproofing band at the base of perimeter walls and any element passing through the screed, if present.

4

Soundproofing tape

MAPESILENT TAPE

Seal joints between adjacent tiles with the soundproofing tape and then press it using a rigid roller.

5

Floor heating system

6

Screed

TOPCEM PRONTO

Prepare levels and spread the mix by carefully tamping and floating the surface to obtain a better finish. Minimum thickness above coils: 3 cm. Place a metal reinforcing mesh at half the thickness or include MAPEFIBRE ST30 structural fibres.

7

Screed

ULTRABOND ECO S955 1K

Apply ULTRABOND ECO S955 1K evenly on the surface using a Mapei notched trowel for wood.

8

Pre-finished, brushed solid wood flooring

9

Adhesive

ULTRABOND S997 1K

Apply ULTRABOND S997 1K on the backside of skirtings or, alternatively, directly on the substrate, so that a good transfer of the adhesive is ensured.

10

Sealant

SILWOOD

Cut the cartridge screw thread, screw the nozzle and cut it at 45° angle according to the size of the joint to be filled. Insert the cartridge in the gun and extrude the product.