Product detail

PLANIBOND BA 100

Two-component fluid epoxy resin for anchoring steel bars.

PLANIGROUT 310

Three-component free-flowing high-strength rapid-hardening epoxy mortar applied in layers up to 10 cm thick for anchoring and grouting structures

Three-component free-flowing high-strength rapid-hardening epoxy mortar applied…

RETE 320

Glass fibre mesh for reinforcing epoxy systems.

ULTRABOND ECO P909 2K PLUS is a two-component, solvent-free adhesive without water with very low emission of volatile organic compounds (EMICODE EC1 R Plus). Complies with EN 14293 , “hard” category.…

ULTRABOND ECO P909 2K PLUS is a two-component, solvent-free adhesive without…

PRIMER RM

Two-component fillerized epoxy primer for treating the surface of concrete before applying epoxy mortar.

Two-component fillerized epoxy primer for treating the surface of concrete…

PLANISEAL 88

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures.

Osmotic cementitious mortar suitable for contact with drinking water, for…

PU CATALYST

Accelerator for polyurethane MAPEFLOOR PARKING SYSTEM products.

PLANISEAL 288

Two-component cementitious mortar for waterproofing structures below ground level and storage tanks.

Two-component cementitious mortar for waterproofing structures below ground…

ULTRABOND ECO FAST TRACK

Fast set, universal adhesive quick renovation of resilient floor coverings and for installing, coves and stairs.

Fast set, universal adhesive quick renovation of resilient floor coverings and…

ULTRABOND ECO 550

Hard and fast set adhesive for linoleum floors.

MAPECOLOR PIGMENT

Powdered pre-dispersed oxides to create an even stable colour in concrete mixes.

PRIMER P2

One-component solvent-based primer for polyurea coatings (from the PURTOP line) on plastic surfaces such as TPO.

One-component solvent-based primer for polyurea coatings (from the PURTOP line)…

PRIMER P1

One-component solvent-based primer for polyurea coatings (from the PURTOP line) on plastic surfaces such as PVC.

One-component solvent-based primer for polyurea coatings (from the PURTOP line)…

PLASTIMUL C

Solvent-free concentrated bitumen emulsion for treating substrates before applying waterproofing products from the PLASTIMUL line.

Solvent-free concentrated bitumen emulsion for treating substrates before…

PRIMER SN RASANTE

Two-component epoxy resin with high solid content for smoothing and levelling cementitious surfaces

Two-component epoxy resin with high solid content for smoothing and levelling…

ULTRABOND ECO CONTACT

Solvent-free contact adhesive for resilient and textile floor and wall coverings. Suitable for bonding covings, fillets, steps and corner pieces.

Solvent-free contact adhesive for resilient and textile floor and wall…

ULTRABOND ECO 530

ULTRABOND ECO 530 is suitable for bonding linoleum floor and wall coverings, characterised by a fast and strong initial tack , also wet , with leg developement.

ULTRABOND ECO 530 is suitable for bonding linoleum floor and wall coverings,…

ULTRABOND 333

Multi-purpose adhesive with long open time for vinyl, textiles and linoleum floor and wall coverings.

Multi-purpose adhesive with long open time for vinyl, textiles and linoleum…

ULTRACOAT EASY

One-component water-based acrylic-polyurethane varnish for wooden floors with good resistance to wear and abrasion. Suitable for floors subjected to normal pedestrian use.

One-component water-based acrylic-polyurethane varnish for wooden floors with…

ULTRACOAT SOFT TOUCH BASE

One-component, rapid drying, water-based primer for preparing wooden floors before applying ULTRACOAT SOFT TOUCH FINISH. Product with low emission of volatile organic compounds (VOC).

One-component, rapid drying, water-based primer for preparing wooden floors…

Keep in touch