MAPEFLOOR FINISH 630

Two-component, protective acrylic filming agent in water dispersion for concrete, ULTRATOP and ULTRATOP LIVING floors.
TECHNICAL DATA:
Mixing ratio: comp. A: comp. B: = 10 : 0.15.
Colour of mix: transparent, milky.
Consistency of mix: fluid.
Dry substances content (3 h - 105°C) (%): 23.
Density of mix (kg/m³): 1,028.
Viscosity of mix (mPa·s): 25 (# 1 - 100 rpm).
Workability time: 60 min.
Surface temperature: from +12°C to +30°C.
Varnishing: after 6-8 h at +23°C.
Dust dry at +23°C and 50% R.H.: 2 h.
Abrasion resistance (Taber abrasimeter) (CS17 disk - 500 revs - 1,000 g) after 7 days (mg): 65.
Set to light foot traffic at +23°C and 50% R.H.: 24 h.
Final hardening time: 4 days.
Storage: 12 months in its original sealed packaging. Protect from frost.
Application: short-haired roller such as mohair or a suitable airless spray system.
Consumption: 0.15-0.2 kg/m² according to the grade of porosity and absorption of the substrate.
Packaging: 2 kits (A+B) of 10 + 0.150 kg units.

MAPEFLOOR FINISH 630 is part of the lines:

Related documentation

Technical data sheet
Download
Safety Data Sheet
Download

Last Projects MAPEFLOOR FINISH 630

Category icon COMMERCIAL FACILITIES

2017

Lafarge Construction Development Laboratory (CDL)

Petaling Jaya, Malaysia

Resin floors application

Category icon PUBLIC BUILDINGS AND URBAN DESIGN

2011/2020

MEIS | National Museum of Italian Judaism and the Shoah

Ferarra, Italy

Installation of floor and wall coverings

Category icon SPORT FACILITIES

2016

De Taradell

Taradell, Spain

Installation of floor and wall coverings, Waterproofing

Category icon COMMERCIAL FACILITIES

2018

Renovation works at prestige retail shop at Pacific Place (Shop 251), Hong Kong

Hong Kong

Installation of floor and wall coverings

Keep in touch

Subscribe to our newsletter to get Mapei news