Products for building

The only way of creating a durable, sustainable structure is to think in terms of systems rather than products.
This is why, year in year our, we create cutting-edge systems and materials to give you the opportunity of tackling the issue of the durability of structures and infrastructures from a new point of view. Mapei have a concrete repair range as well as waterproofing solutions and more.

Select a product category

Admixtures for mortars and concrete

Bonding and smoothing cellular bricks and expansive blocks

Cement-based flooring system

Concrete Repair

Concrete/Screed Admixtures

Consolidating masonry

Construction products for Wind Turbine

Elastic bonding and sealing

Expansion and Construction Joints

Form release agents and curing agents

Graffiti Treatments

Industrial Flooring

Levelling screeds, substrates and existing flooring

Primers for substrate preparation

Products for the Restoration of Masonry

Protecting and Decorating Concrete and Renders

Reinforcing and protecting industrial flooring

Repairing cracked concrete by injecting casting

Screeding and substrate preparation

Sealing and Waterproofing

Sealing and waterproofing expansion and construction joints

Smoothing concrete surfaces and renders

Structural Bonding

Structural bonding with epoxy resins

Substrate Preparation and Repair

Thermal Insulation

Waterproofing and Protective Products

EPOJET LV

Two component low viscosity epoxy resin for injection. Epojet LV is used to attribute the monolithic nature to cracked structures and for bonding and…

Two component low viscosity epoxy resin for injection. Epojet LV is used to…

LAMPOCEM

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder.

MAPECURE SRA

Curing admixture for cementitious mortar and concrete to reduce hydraulic shrinkage and the formation of micro-cracks. TECHNICAL DATA: Consistency:…

Curing admixture for cementitious mortar and concrete to reduce hydraulic…

MAPEFER 1K ZERO

One-component, anti-corrosion cementitious mortar for steel reinforcement rods

MAPEFILL 110

Mapefill 110 is a pre-blended powdered grout composed of high-strength cement, graded aggregates and special admixtures with an expansive agent…

Mapefill 110 is a pre-blended powdered grout composed of high-strength cement,…

MAPEFILL GP

Mapefill GP is a pre-blended powdered grout based on high strength cement, graded aggregates with 1 mm diameter and special additives with an…

Mapefill GP is a pre-blended powdered grout based on high strength cement,…

MAPEFILL GP ZERO

Where to use: Recommended for grouting voids in structural elements such as: filling gaps in precast elements, a grouting base plates and bridge…

Where to use: Recommended for grouting voids in structural elements such as:…

MAPEGROUT 430 ZERO

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. May also be applied with continuous-feed rendering machine

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…

MAPEGROUT GUNITE

One component, ready-to-use, multi-purpose, fibre reinforced, cementitious mortar, applied using either the dry or damp spraying technique Where to…

One component, ready-to-use, multi-purpose, fibre reinforced, cementitious…

MAPEGROUT GUNITE FSD

One-component, ready-to-use, fibre-reinforced, cementitious mortar, applied using wet or dry application spraying technique with extra fast hardening.

One-component, ready-to-use, fibre-reinforced, cementitious mortar, applied…

MAPEGROUT HI-FLOW ZERO

Shrinkage-compensated, fibre-reinforced mortar for concrete repair

MAPEGROUT SV

TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT SV with 12-13 parts of water. Pot life of mix: 15…

TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts…

MAPEGROUT SV FIBER

TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT SV FIBER with 13.5-14.5 parts of water. Pot life of mix:…

TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts…

MAPEGROUT SV T

Quick-setting, shrinkage-controlled, thixotropic mortar for repairing concrete, fixing drains, manholes and urban fixtures. Mapegrout SV T is used…

Quick-setting, shrinkage-controlled, thixotropic mortar for repairing concrete,…

MAPEGROUT T40

Medium strength (40 MPa) thixotropic mortar for the repair of concrete. Use Mapegrout T40 to repair damaged concrete surfaces such as balconies and…

Medium strength (40 MPa) thixotropic mortar for the repair of concrete. Use…

MAPEGROUT T60

Sulphate-resistant thixotropic fibre-reinforced mortar for the repair of concrete. Use Mapegrout T60 to repair damaged concrete surfaces such as…

Sulphate-resistant thixotropic fibre-reinforced mortar for the repair of…

MAPEGROUT THIXOTROPIC ZERO

Shrinkage-compensated fibre-reinforced mortar for concrete repair

MAPEMORTAR HB R3

A medium strength, high build, shrinkage compensated repair mortar for repairing concrete.

A medium strength, high build, shrinkage compensated repair mortar for…

MAPEMORTAR HB R3 ZERO

Where to use: Repairing damaged concrete surfaces in overhead, vertical and horizontal situations, where a medium strength high build mortar is…

Where to use: Repairing damaged concrete surfaces in overhead, vertical and…

MAPESHIELD E 25

Adhesive zinc plates applied directly on the surface of structures for galvanic cathodic protection against the corrosion of reinforcement rods in…

Adhesive zinc plates applied directly on the surface of structures for galvanic…

MAPESHIELD I

MAPESHIELD I are multilayer pure zinc anodes coupled with a special conductive paste for galvanic cathodic protection of reinforcement rods against…

MAPESHIELD I are multilayer pure zinc anodes coupled with a special conductive…

PLANIGROUT 300

TECHNICAL DATA: Maximum dimension of aggregate: 2 mm. Mixing ratio: comp. A : comp. B : comp. C = 16 : 6 : 100. Pot life of mix: 1 hour (at 23°C).…

TECHNICAL DATA: Maximum dimension of aggregate: 2 mm. Mixing ratio: comp. A :…

PLANITOP FINE FINISH

Ultra fine textured skimming mortar for concrete; recommended for exposed finish surfaces.

Ultra fine textured skimming mortar for concrete; recommended for exposed…

PLANITOP SMOOTH & REPAIR R4 ZERO

Structural R4-class, rapid-setting, shrinkagecompensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40…

Structural R4-class, rapid-setting, shrinkagecompensated, thixotropic,…

PLANITOP SMOOTH & REPAIR ZERO

Quick-setting, fibre-reinforced, shrinkage-compensated, thixotropic cementitious mortar for repairing and smoothing concrete, applied in various…

Quick-setting, fibre-reinforced, shrinkage-compensated, thixotropic…

Innovation and quality for the building industry

The line is made up of numerous products, including mortars for repairing, skimming and protecting concrete, epoxy mortars and systems for structural bonds, products for crack injection and products for making anchor points.

INNOVATION

Cutting-edge materials and systems of the highest quality

VERSATILITY

Dams, viaducts, canals, depuration plants and residential buildings, right up to the buildings of the future

EXPERIENCE

The building products line was created in 1998

Technical documentation

Products for building

Select a product category

Innovation and quality for the building industry

Cutting-edge materials and systems of the highest quality

Dams, viaducts, canals, depuration plants and residential buildings, right up to the buildings of the future

The building products line was created in 1998

Technical documentation

Brochures

Selection charts

Technical manuals

News & Events

Solutions

System for red clay tennis courts

System for laying textile and needle punch flooring

Application of resin floorings in children areas

System for waterproofing reinforced concrete spectator terraces with sprayed polyurea hybrid membrane

Waterproofing reinforced concrete of foundations for new structures by open excavation with temporary shoring in groundwater

System for the installation of ceramic tiles on metal surfaces

Mapefloor Parking System HE

Double-sided adhesive tape for the installation of resilient coatings on steps and skirtings

Fast track system for renovating old floorings with resilient and textile floor coverings

Installation of wooden flooring in public areas

EC1 Plus system for laying acoustic PVC with foam backing in sheet

EC1 Plus system for laying rubber flooring onto concrete substrate with high level of residual moisture

System for the installaton of ceramic tiles on heated screeds

Rapid system for the installation on existing flooring with anti-fracture membrane

Multi-layared two-component polyurethane resin-based system for professional indoor and outdoor bowls courts.

Laying of carpet inside passenger cabins

Decorative wall coating and installation of flooring with high aesthetic value also for internal use

Protection system of existing buildings in the event of seismic activity

Rapid system for laying natural stone slabs

Eco-sustainable system for the installation of textile flooring on existing terrazzo tiles with remaining adhesive

Projects

Edgware Road underground station

HS2 Copthall Green Tunnel

Crown Packaging Manufacturing

Bristol City Leap

Realtà Mapei articles

Do you need assistance?

Keep in touch