Back

Installation of irregular stone paving

Application steps

Discover the application steps, the products used for this solution and other alternative products.

1

Substrate CALCESTRUZZO VAGA RCK 37

Mix with 1.5 litres of water per bag, spread or pump with traditional concrete machines, vibrate. CAM and EPD certified product, with structural fibres, indispensable in all those situations where it is not possible to use a concrete mixer.

2

Uncoupling layer / Non-woven fabric

3

Mortar bed

MAPESTONE TFB 60

Create a base screed of 5 to 7 cm thickness with plastic consistency.

4

PLANICRETE based adhesion slurry

Create an adhesion slurry using 1 part PLANICRETE, 1 part water and 3 parts cement.

5

Paving.

6

Grout

MAPESTONE PFS 2 FLEX

Prepare MAPESTONE PFS 2 FLEX mix with a suitable mechanical mixer and pour the product to completely fill the grouts. Clean the stones before the product hardens using water jet or suitable cleaning machines.

7

Sealant MAPESIL LM + MAPEFOAM

Seal the perimeter and expansion joints after inserting MAPEFOAM to set the correct depth. and then finish off the surface of the sealant with ULTRACARE SMOOTH SILICONE.