Back

Soundproofing system for installing wood on old terrazzo floors

Application steps

Discover the application steps, the products used for this solution and other alternative products.

1

Old marble tiles

The old tiles must be clean and well bonded to the base layer. Clean the surface of the existing floor with UltraCare HD Cleaner diluted 1:5 or 1:10 with water according to the amount of dirt on the floor.

2

Sanding old marble tiles

3

Adhesive

ULTRABOND ECO S958 1K

Apply the adhesive with a No. 2 Mapei trowel

4

Soundproofing membrane MAPESONIC CR (2 mm)

Apply MAPESONIC STRIP adhesive tape along the perimeter walls, pillars and any other element passing through the floor. Apply the soundproofing membrane by butting the sheets against one another

5

Adhesive

ULTRABOND ECO S958 1K

Apply the adhesive with a Mapei wood trowel.

6

Multilayer pre-polished wood floor

7

Water-based binder for grout

ULTRACOAT BINDER

Seal the surface of the floor by applying the product mixed with sawdust from the same flooring material with an ULTRACOAT STEEL SPATULA.

8

Water-based one-component coat

ULTRACOAT UNIVERSAL BASE

Apply the primer with an ULTRACOAT ROLLER T10.

9

Water-based one-component polyurethane lacquer ULTRACOAT EASY PLUS (2 coats)

Finish off the surface by applying two coats of product with an ULTRACOAT ROLLER T5.

10

Sealant

Seal the skirting with Silwood in the same colour as the wood flooring.

You may be interested in Soundproofing Installation of wooden flooring

NOT REMOVE

Keep in touch

Subscribe to our newsletter to get Mapei news