Project Csillaghegy Árpád Spring bath, Budapest

Csillaghegy Árpád Spring bath

Budapest, Hungary

Ref #: 1

Category: TOURISM AND WELLNESS

Construction


Yard	baths and swimming.pools
Location	Budapest, Hungary
Subcategory	SWIMMING POOL
Application	supply of products for waterproofing and ceramic tiles installation
Start and finish date	2018
Application Type	Floor/wall coverings, Waterproofing systems
Client	Budapest Spas cPlc.
Contractor company	Kalotherm Ltd.
Installer companies	AG Total Solutions Ltd.; Filó és Társa Ltd.
Architects	YBL Tervező Ltd.
MAPEI Distributor	AG Total Solutions Kft.
Credits	Dávid Kecskeméti
Project Manager	Budapest Spas cPlc.
MAPEI Coordination	György Hugyecsek

Product used for the project

ADESILEX P9

The “historic” adhesive that never ages! For more than 60 years Mapei experience at the service of installers on sites all around the world. Recommended for every type of ceramic tile , mosaic and d…

The “historic” adhesive that never ages! For more than 60 years Mapei…

EPOJET

Two-component, super-fluid epoxy resin for injections and anchorings.

ISOLASTIC

Latex additive to impart elasticity to cementitious adhesives

KERABOND T

Cementitious adhesive with no vertical slip for ceramic tiles.

KERAPOXY CQ

KERAPOXY CQ is a Two-component bacteriostatic epoxy mortar, with BioBlock® technology , high hygenic and complies with the HACCP system , suitable for difficult surroundings where ceramic tiling is…

KERAPOXY CQ is a Two-component bacteriostatic epoxy mortar, with BioBlock®…

MAPELASTIC TURBO

MAPELASTIC TURBO is a two-component, quick-drying , elastic cementitious mortar, including at low temperatures and on substrates that are cured but not perfectly dry . Together with other accessory…

MAPELASTIC TURBO is a two-component, quick-drying , elastic cementitious…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

NIVOPLAN

Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm.

Smoothing mortar for internal and external walls and ceilings for thicknesses…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

RESFOAM 1KM

One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.

One-component, ultra-fluid polyurethane resin applied by injection for…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…

ULTRAPLAN RENOVATION is a self-levelling smoothing compound used in interiors for levelling and smoothing differences in thicknesses from 3 to 40 mm on new or existing substrates, especially suitable…

ULTRAPLAN RENOVATION is a self-levelling smoothing compound used in interiors…