Yes, with these limitations: Do not use on exterior floors with drainage of less than 1/4" per foot. And do not use on shower floors or in submerged applications, or on floors subject to standing water.
Yes, it can be used for sound reduction, crack isolation, waterproofing and vapor management. However, when using Mapesonic 2 for vapor management, do not use MAPEI SM Primer or MAPEI SM Primer Fast; instead, use MAPEI HM Primer. If there are seams, the use of Mapetape BB tape is also necessary for waterproofing and vapor management.
Yes, with these limitations: Tile must be installed per installation standards published in the most current TCNA Handbook, ANSI 108 specification. And if the OSB is weather-beaten or delaminated, it must be properly overlaid with a cement backer unit or an additional layer of subfloor.
Yes, with these limitations: Use MAPEI adhesive Ultrabond ECO 350, Ultrabond ECO 360, Ultrabond ECO 373 or Ultrabond ECO 399. Also, follow MAPEI’s Technical Data Sheet instructions and use a 1/32" U-notch trowel. Finally, expect 60 to 90 minutes of flash time before installing the LVP/LVT.
Keep in touch
