Video tutorials & spotlights

Technical Tutorials Reset filters

Technical Tutorials

Add to APP, Technical Tutorials

How to Restore a Concrete Balcony with MAPEI's Repair Mortar and Protective Deck Coating

If your concrete balcony is cracked, worn or even just in need of a little sprucing up, MAPEI has an…

Mapecoat P 288 System

Planitop 13

Epojet [NA]

+ 1

Show products

Featured Products

Mapecoat P 288 System

Mapecoat P 288 System is a slightly flexible system combining a polymer-modified cementitious waterproofing coating, Planiseal 288 , reinforced with Fiberglass Mesh , and a durable-wear acrylic topcoat, Mapecoat Deck T . This system can be used on indoor/outdoor concrete slabs exposed to pedestrian traffic, including balconies and walkways. The easily installed Mapecoat P 288 System is available in a wide range of colors, and is designed to improve the durability of the concrete by limiting the penetration of water and chlorides.

Planitop 13

Planitop 13 is a one-component, polymer-modified, fiber-enhanced, extended-working-time, cementitious repair mortar with corrosion inhibitor designed for vertical and overhead applications.

Epojet [NA]

Epojet [NA] is a high-strength, two-component, 100%-solids, low-viscosity, epoxy resin for pressure injection and sealing of cracks in structural concrete, masonry and wood.

Mapecoat Deck T

Mapecoat Deck T is a water-based, slip-resistant coating specially designed for use on new and previously coated concrete and masonry as a waterproofing sealer. Mapecoat Deck T creates an attractive, durable wear surface for residential and commercial indoor/outdoor decks, balconies and walkways. It offers enhanced durability to withstand pedestrian and light vehicular traffic with the convenience and easy application of a single-component product.

Add to APP, Technical Tutorials

MTI-TV – MAPEI’s Planiseal CR1 cold-fluid-applied, structural waterproofing membrane

Sam describes the benefits of Planiseal CR1 , which can be used in interior and exterior applications with a…

Add to APP, Technical Tutorials

MTI-TV #25 – Installing Backsplashes

MAPEI’s Sam Biondo and Logan Reavis discuss the various methods and products for installing backsplashes.

Mapesil T Plus

MAPEI Flexcolor CQ

Ultrabond ECO GPT

+ 3

Show products

Featured Products

Mapesil T Plus

Mapesil T Plus is a professional-grade, 100%-silicone sealant with enhanced adhesion for use on multiple substrates. This product is specifically formulated for heavy traffic and expansion/movement joints exceeding both ASTM and ANSI standards.

MAPEI Flexcolor CQ

MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.

Ultrabond ECO GPT

Ultrabond ECO GPT is a single-component, nonsag, easy-to-trowel, hybrid-polymer-based adhesive technology specially designed for the installation of gauged porcelain tile and gauged porcelain tile panels/slabs on interior/exterior vertical surfaces and countertops. Unique technology advancements are incorporated in the formulation of Ultrabond ECO GPT for delivering instant grab, while allowing for the needed adjustability of panels and large-format tile. Superior bonding performance is complemented with flexibility, deformability and quick-curing characteristics to meet the demands of installing gauged porcelain tile, panels and slabs with application-friendly properties.

Adesilex P10 Mosaic & Glass Tile

Adesilex P10 Mosaic & Glass Tile is a premium-grade, bright white, multipurpose thin-set mortar formulated with nonsag properties. Adesilex P10 Mosaic & Glass Tile is designed for glass tile, glass mosaic and marble mosaic, and is ideal for light translucent natural stone.

Keraflex Plus

Keraflex Plus is a highly versatile, nonsag/nonslump, large-and-heavy-tile mortar and thin-set mortar for tile and stone installations on floors, walls and countertops. This polymer-modified mortar is formulated with Easy Glide Technology ™ for ease of application and offers excellent adhesion to substrates and tile. It can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

MAPEI Flexcolor 3D

MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#5201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

Add to APP, Technical Tutorials

MTI-TV – Mapeheat Floor-Heating Thermostats

Compatible with the Mapeheat floor-heating system, these thermostats include Mapeheat Thermo Basic , Mapeheat…

Mapeheat Thermo Extender

Mapeheat Thermo Connect

Mapeheat Thermo Basic

+ 1

Show products

Featured Products

Mapeheat Thermo Extender

Mapeheat Thermo Extender is a 25-amp power relay switch compatible with Mapeheat floor-heating thermostats. Available in either 120 V or 240 V, the device enables floor-heating loads in excess of 15 amps to be controlled by a single thermostat.

Mapeheat Thermo Connect

Mapeheat Thermo Connect WiFi-enabled, floor-sensing thermostat has been designed specifically for today’s smart home. Homeowners can monitor, control and program their Mapeheat Thermo Connect floor-heating system via a free smartphone app (iOS and Android) or any Web browser. Homeowners can access a super-intuitive user interface using the 3.5" (9 cm) color touchscreen display. The thermostat also provides homeowners with useful information such as energy usage and weather forecasts. The Mapeheat Thermo Connect thermostat features 7-day programmability, dual-voltage compatibility (120 V and 240 V) and built-in GFCI protection (Class A). The exclusive design features a high-gloss frame and a borderless clear acrylic that blends into any modern room decor.

Mapeheat Thermo Basic

Mapeheat Thermo Basic thermostat is a non-programmable control that offers simple on/off capability for the Mapeheat floor-heating system. The thermostat offers the most basic type of control and features energy usage information, dual-voltage compatibility (120 V and 240 V), a physical on/off switch and built-in Class A GFCI protection.

Mapeheat Thermo Touch

Mapeheat Thermo Touch thermostat is a 7-day programmable, electric floor-heating thermostat that features a 3.5" (9 cm) color touchscreen display for accessing the super-intuitive user interface and energy use monitor. The thermostat features dual-voltage compatibility (120 V and 240 V), a physical on/off switch and built-in GFCI protection (Class A).

Technical Tutorials, Add to APP

MTI-TV #24 – Installing LVT in wet environments

Sam and Jeff discuss installing LVT in wet areas using MAPEI’s Shower System 4 LVT .

Planiprep 4 LVT [NA]

Mapesil T Plus

Keracaulk S

+ 6

Show products

Featured Products

Planiprep 4 LVT [NA]

High-Moisture-Resistant Skimcoat and Embossing Leveler Planiprep 4 LVT [NA] is a premixed, high-moisture-resistant, water-based, acrylic-resin-based skimcoat and embossing leveler.

Mapesil T Plus

Keracaulk S

Keracaulk S is a premium-grade, easy-to-use, easy-to-clean, siliconized, sanded acrylic caulk. It is available in select colors to match all of MAPEI’s grout colors.

Keracaulk U

Keracaulk U is a premium-grade, easy-to-use, easy-to-clean, siliconized, unsanded acrylic caulk. It is available in select colors to match all of MAPEI’s grout colors.

MAPEI Flexcolor CQ

Kerapoxy CQ

Kerapoxy CQ is a two-component, 100%-solids, epoxy grout and mortar that is nonsagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock ® technology to help protect against mold and mildew. Kerapoxy CQ does not contribute to efflorescence and has excellent resistance to chemicals, staining, alkalinity, chlorine, cracking and color deterioration.

Ultrabond ECO MS 4 LVT Wall [NA]

Ultrabond ECO MS 4 LVT Wall [NA] is a moisture-curing, one-component, thixotropic, silane-modified polymer adhesive specifically designed for the direct bonding of various resilient flooring types in both wall and floor installations.

Mapecoat 4 LVT [NA]

Two-Component, Water-Based, Aliphatic, Anti-Slip, Polyurethane Finish for LVT Mapecoat 4 LVT [NA] is a transparent protective finish that comes in matte (10 gloss) and semi-gloss (30 gloss) for luxury vinyl tile (LVT) in addition to other resilient flooring in horizontal and vertical applications. It provides a non-slip finish with high resistance to wear in residential and commercial environments, including wet areas such as tub surrounds and shower enclosures as well as dry areas that are subject to high foot traffic.

Mapelastic AquaDefense

Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional Reinforcing Fabric or Mapeband ™ accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10-LV and ANSI A118.12 standards.

Technical Tutorials, Add to APP, Products

MTI-TV – MAPEI’s MapeLevel EasyWDG System

Create the perfect tile or stone installation with a few simple steps. The spacers and wedges yield perfectly…

MapeLevel EasyWDG System

Show products

Featured Products

MapeLevel EasyWDG System

MapeLevel EasyWDG System provides greater quality and consistency in tile finishes by reducing the effects caused by slight variations in substrates and tiles. Unlike most of the lippage-control systems currently available on the market, MapeLevel EasyWDG System has been designed to be applied entirely by hand. The ergonomic shape of the MapeLevel EasyWDG wedge allows it to be inserted smoothly and quickly into the MapeLevel EasyWDG Spacer M clips. MapeLevel EasyWDG Pliers are available where the use of a tool is preferred. Quick and easy to apply, the wedge and clips can prevent tile lippage and promote a flat tile surface.

Add to APP, Technical Tutorials

Forget the Gap with MAPEI’s Ultrabond ECO 399

Sam discusses how MAPEI’s Ultrabond ECO 399 adhesive resists high moisture in concrete slabs as well as…

Ultrabond ECO 399

Show products

Featured Products

Ultrabond ECO 399

Ultrabond ECO 399 is a high-moisture-resistant, heavy-rolling-load-resistant, aggressive, pressure-sensitive adhesive with enhanced dimensional control properties designed to install a wide variety of resilient flooring types. Ultrabond ECO 399 can also be used for flash-coving installations using traditional installation methods.

Technical Tutorials, Add to APP

MTI-TV - MAPEI’s Mapelastic® AquaDefense Waterproofing

MAPEI’s Mapelastic AquaDefense is an extremely quick-drying, liquid-rubber waterproofing membrane, perfect…

Mapelastic AquaDefense

Show products

Featured Products

Mapelastic AquaDefense

Add to APP, Technical Tutorials

MTI-TV #23 – Protecting, repairing and restoring a variety of tile, stone and grout surfaces

MAPEI’s Sam Biondo and Nick Valenti discuss protecting, repairing and restoring a variety of tile, stone and…

UltraCare Grout Refresh

UltraCare Heavy-Duty Stone, Tile & Grout Cleaner

UltraCare Penetrating Plus Stone, Tile & Grout Sealer

+ 1

Show products

Featured Products

UltraCare Grout Refresh

UltraCare Grout Refresh is a nonflammable, ready-to-use, water-based, polymer-modified colorant and sealer for grout joints. It can be applied onto and bonds to cement, epoxy, urethane and acrylic grouts.

UltraCare Heavy-Duty Stone, Tile & Grout Cleaner

UltraCare Heavy-Duty Stone, Tile & Grout Cleaner is a highly concentrated and high-alkaline cleaner and degreaser. This product is formulated to quickly remove most waxes, grease, oil, light soap scum, and stains from mildew and algae. It is quite effective at removing most factory-applied waxes and floor finishes, and is ideal for areas that have been neglected or subject to heavy use.

UltraCare Penetrating Plus Stone, Tile & Grout Sealer

UltraCare Penetrating Plus Stone, Tile & Grout Sealer is a premium, natural-look, water-based penetrating sealer that provides maximum protection against most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed ceramic tile, masonry and grout. The product can also be used as a pre-grouting sealer.

UltraCare Penetrating SB Stone, Tile & Grout Sealer

UltraCare Penetrating SB Stone, Tile & Grout Sealer is a natural-look, solvent-based penetrating sealer that provides maximum protection against most common stains. It is safe for use on all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed porcelain and ceramic tiles, masonry, quarry tiles and cement grout. The product can also be used as a pre-grouting sealer.

Technical Tutorials

MTI-TV #22 — MAPEI’s Best-Kept Secret: Fast Prep for Large Format Tiles

Sam and Brian discuss MAPEI’s best-kept secret: The fast surface prep for large format tiles that comes with…

Planislope RS

Planitop 330 Fast

Show products

Featured Products

Planislope RS

Planislope RS is a rapid-setting, pre-blended, cement-based, polymer-modified mortar that includes a blend of select aggregates for use in sloping and thick-bed mortar installations. It only needs mixing with water to produce a mortar of exceptional strength. Used for preparing a substrate before the installation of tile and stone, Planislope RS is designed for pre-sloping under waterproofing membranes and mortar beds in showers when quick turnarounds are desired.

Planitop 330 Fast

Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching and leveling mortar for interior and exterior walls, floors and submerged areas. It can be applied from 1/8" to 1-1/4" (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces. Eliminating the need for a latex additive, Planitop 330 Fast requires only mixing with water to produce a non-sagging mortar that is ready for tile installation in as little as 90 minutes.

Add to APP, Technical Tutorials

MTI-TV #14: Sound-Reduction Products: Choosing the Right Acoustical Floor

Sam and Sonya discuss the benefits and ratings of MAPEI’s different sound-reduction products.

Mapesonic 2

Mapeguard 2

Show products

Featured Products

Mapesonic 2

Mapesonic 2 is a patented, next-generation, flexible, 76-mil thin, lightweight, load-bearing, fabric-reinforced, “peel-and-stick” membrane for sound reduction, crack isolation, waterproofing and vapor management. Application of Mapesonic 2 can be immediately followed by installation of finished flooring. Mapesonic 2 reduces transmission of impact sound (such as footsteps and dropped objects) and airborne sound (such as voice and TV) through floors when installed under ceramic tile, stone, vinyl and wood floorings. It also helps to prevent existing or future in-plane floor cracks (with movement up to 3/8" or 10 mm wide) from transmitting through grout, ceramic tile and natural-stone assemblies.

Mapeguard 2

Mapeguard 2 is a next-generation, flexible, thin, 40-mil (1-mm) lightweight, load-bearing, fabric-reinforced “peel-and-stick” crack-isolation, waterproofing and vapor-control membrane. Mapeguard 2 helps to prevent existing or future in-plane floor cracks (with movement up to 3/8" [10 mm] wide) from transmitting through grout, ceramic tile and natural stone. It also reduces the transmission of impact sound (footsteps, dropped objects, etc.) and airborne sound (voice, TV, etc.) through floors when installed under ceramic tile, stone or wood floor coverings.

Add to APP, Technical Tutorials

MTI-TV #21: Choosing the Right Grout

MAPEI’s Sam Biondo and David Mowery discuss the wide variety of grouts that is offered by MAPEI. Which grout…

Keracolor S

MAPEI Flexcolor CQ

Kerapoxy IEG CQ

+ 7

Show products

Featured Products

Keracolor S

Keracolor S is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

MAPEI Flexcolor CQ

Kerapoxy IEG CQ

Kerapoxy IEG CQ is a water-cleanable, 100%-solids, epoxy grout with high chemical and stain resistance. It is a nonshrinking, nonsagging, fast-curing, ef orescence-free grout. Color-coated quartz dramatically improves its cleanability, so that Kerapoxy IEG CQ leaves very little lm residue during cleanup of excess grout with a grout oat. The color-coated quartz also eliminates pigment bleed, so tiles are not stained during installation. This grout is perfectly suited for use in commercial kitchens, meat packing houses, and any commercial and institutional oors that require daily cleaning with enzymatic cleaners. Kerapoxy IEG CQ is ideal for applications where high-strength, mold- and mildew-resistant grout joints are required. In addition, it has high temperature resistance and can be steam-cleaned.

Ultracolor Plus Max

Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect™ technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

Kerapoxy CQ

Kerapoxy

Kerapoxy [NA] is a premium-grade, water-cleanable, 100%-solids, high-strength, chemical-resistant, nonsagging, epoxy grout and mortar that offers excellent stain and chemical resistance. This versatile product is ideal for a wide range of projects, from countertops to shopping malls to airport terminals.

MAPEI Flexcolor Design

MAPEI Flexcolor Design is a professional-grade, ready-to-use (RTU) specialty grout that allows you to “design your color,” any color. MAPEI Flexcolor Design is formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor Design is formulated with the latest innovation in recycled glass-bead aggregate that enhances cleanability and improves workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. This product is exclusively for National Brand Accounts and Commercial Projects. For complete information on samples and ordering, contact your local MAPEI architectural representative.

Keracolor U

Keracolor U is a premium-grade, preblended, polymer-modified unsanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/16" to 1/8" (1.5 to 3 mm).

Ultracolor Plus FA

Ultracolor Plus FA – with DropEffect ™ technology and CO 2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT ™ ) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

MAPEI Flexcolor 3D

Technical Tutorials

MTI-TV— MAPEI Flexcolor 3D: Ready-to-use translucent tile grout

MAPEI Flexcolor 3D grout looks especially dramatic when used with glass tiles. It provides a translucent…

MAPEI Flexcolor 3D

Show products

Featured Products

MAPEI Flexcolor 3D

Add to APP, Technical Tutorials

MTI-TV #20: Sustainability is built into MAPEI, Part 2

Sam Biondo and Sustainability Manager Brittany Storm discuss MAPEI’s award-winning environmental efforts,…

Add to APP, Technical Tutorials

MTI-TV – MAPEI Flexcolor 3D and MAPEI Flexcolor CQ

MAPEI Flexcolor CQ and MAPEI Flexcolor 3D are ready-to-use, color-consistent grouts for residential and…

MAPEI Flexcolor CQ

MAPEI Flexcolor 3D

Show products

Featured Products

MAPEI Flexcolor CQ

MAPEI Flexcolor 3D

Add to APP, Technical Tutorials

MTI-TV – Novoplan HFL and DPL: The latest in self-leveling technology

Description: Sam discuss the differences between MAPEI’s two new self-leveling underlayments for demanding…

Novoplan DPL

Novoplan HFL

Show products

Featured Products

Novoplan DPL

Novoplan DPL is a self-leveling, calcium-aluminate-based underlayment and repair mix for interior concrete and engineer-approved floors and is capable of being placed up to 4" (10 cm) in a single lift.

Novoplan HFL

Novoplan HFL is a self-leveling, calcium-aluminate-based underlayment and repair mix for interior concrete and engineer-approved floors with high-flow characteristics.

Add to APP, Technical Tutorials

MTI-TV #19: When nails are not enough

Wood plank flooring designs are getting wider and wider, which means that nails alone are not adequate for…

Planiseal PMB

Ultrabond ECO 977

Ultrabond ECO 907

Show products

Featured Products

Planiseal PMB

One-Component, Polyurethane Moisture Barrier and Bonding Agent Planiseal PMB is a one-component, moisture-curing, polyurethane compound designed to provide moisture vapor emission protection on damp concrete substrates in a single- or double-coat application method as well as a vapor retarder using a single-coat method over wood substrates. It also serves as a bonding agent and moisture barrier system for self-leveling underlayments when applied in a double-coat method with dry sand.

Ultrabond ECO 977

Ultrabond ECO 977 is a fast-setting, 100%-solids, one-component, moisture-cured urethane adhesive specifically designed for the installation of domestic solid and engineered wood flooring. Ultrabond ECO 977 can also be used in elevated subfloor moisture conditions of up to 12 lbs. (5.44 kg) MVER and 95% relative humidity when a specific installation method and trowel notch configurations are used.

Ultrabond ECO 907

Ultrabond ECO 907 is a fast-curing, 100%-solids, moisture-curing, gun-grade adhesive designed for basic wood subfloor construction practices as well as repairing of wood flooring; bonding of wood stair nosings; installation of wood molding and baseboards; and attachment of tackstrips to concrete subfloors. Ultrabond ECO 907 is also ideal for supplemental bonding of wide plank boards when nailing and gluing are required.

Add to APP, Technical Tutorials

MTI-TV #18: Sustainability is built into MAPEI

Are you curious about VOCs? Or about how mortar and grout can contribute to a healthier environment? Sam…

Add to APP, Technical Tutorials

MTI-TV #17: Keraflex mortars and High Transfer Technology

Sam and Brian discuss the MAPEI’s Keraflex ™ family of mortars, featuring High-Transfer Technology™

Keraflex SG

Keraflex Super

Keraflex RS

+ 1

Show products

Featured Products

Keraflex SG

Keraflex SG is a standard-grade, versatile, large-and-heavy-tile mortar and thin-set mortar for tile and stone installations on floors, walls and countertops. It is formulated as nonsag for walls and nonslump for floors. Keraflex SG is a polymer-modified mortar formulated with Easy Glide Technology ™ for ease of application and offers good adhesion to substrates and tile. It can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Keraflex Super

Keraflex Super is a highly versatile, nonsag/nonslump, large-and-heavy-tile mortar and thin-set mortar for tile and stone for installations on floors, walls and countertops. This polymer-modified mortar has a high content of a unique dry polymer, resulting in excellent adhesion to the substrate and tile, with enhanced resistance to freeze/thaw environments. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions. It is formulated with Easy Glide Technology™ for ease of application and with a consistency that allows adjustability when used with lippage control systems. Keraflex Super can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Keraflex RS

Keraflex RS is a fast-setting, highly versatile, large-and-heavy-tile mortar and thin-set mortar for tile and stone installation on floors, walls and countertops. It is formulated as nonsag for walls and nonslump for floors, allowing tiles to be grouted in as little as 3 to 4 hours after installation. Keraflex RS is a polymer-modified, smooth and creamy mortar formulated with Easy Glide Technology ™ for ease of application and offers excellent adhesion to substrates and tile. It can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Keraflex Plus

Add to APP, Technical Tutorials

MTI-TV #16 – Mapeheat Radiant Floor-Heating Systems

Sam and Sonya discuss MAPEI’s radiant floor-heating products, including the WiFi-enabled,…

Mapeheat Mat

Mapeheat Cable

Show products

Featured Products

Mapeheat Mat

Pre-Wired, Floor-Heating Fabric Mapeheat Mat is a pre-wired, radiant floor-heating fabric designed for easy installation. Embedded in the fabric, the heating wires are evenly spaced and guarantee even heat distribution with no cold spots. Mapeheat Mat is available in more than 70 standard sizes and can also be custom-sized to accommodate curves, angles and obstructions. Each mat’s compact 1/8'' (3 mm) profile creates minimal floor buildup, and floor coverings can be immediately installed.

Mapeheat Cable

Mapeheat Cable is a free-form, twisted-pair, floor-heating cable for use in any residential interior room where the comfort of radiant floor heating is desired. The cable can be spaced on site to provide 10, 12 or 15 W per sq. ft. based on the desired wattage output requirements of the installation. Mapeheat Cable is available in 33 lengths to accommodate areas as small as 6 sq. ft. (0.56 m 2 ) and up to 293 sq. ft. (27.2 m 2 ).

Add to APP, Technical Tutorials

MTI-TV: Resurfacing concrete with Concrete Renew and Concrete Renew Fine

Sam discusses how concrete resurfacing products provide a like-new look to tired and lightly damaged concrete.

Concrete Renew

Concrete Renew Fine

Planicrete UA

Show products

Featured Products

Concrete Renew

Concrete Renew is a one-component, polymer-modified, cementitious material for the resurfacing of existing concrete to provide a like-new look to concrete surfaces.

Concrete Renew Fine

Concrete Renew Fine is a one-component, polymer-modified, cementitious material formulated with a finer aggregate than Concrete Renew for a smoother finish when resurfacing existing concrete.

Planicrete UA

Planicrete UA is a next-generation, water-based, one-component, concentrated liquid latex admixture used to enhance the performance of several MAPEI mortar products, including mortar mixes. Using Planicrete UA as part of the designated design mixes will increase product performance in the areas of bond, flexural and tensile strengths in addition to increased durability and enhanced workability.

Add to APP, Technical Tutorials

MTI-TV Product Spotlight - MAPEI's Ultracolor Plus Max and Ultracolor Plus FA

MAPEI’s Ultracolor Plus Max in Pure White and Jet Black are the whitest white and the blackest black grouts…

Ultracolor Plus Max

Ultracolor Plus FA

Show products

Featured Products

Ultracolor Plus Max

Ultracolor Plus FA

Add to APP, Technical Tutorials

MTI-TV #15: MAPEI floor tapes: Instant installation and moisture resistance

Sam and Jeff discuss the differences between MAPEI’s new double-sided moisture-resistant and sound-reduction…

Mapecontact MRT

Show products

Featured Products

Mapecontact MRT

Mapecontact MRT is a double-sided, moisture-resistant tape for the rapid and permanent installation of a wide variety of resilient flooring types. It has been specifically designed to provide instant bond and instant utilization for residential and commercial floor installations. Mapecontact MRT is unaffected by high moisture conditions in concrete and can be installed without moisture testing.

Add to APP, Technical Tutorials

MTI-TV: Extending MAPEI self-levelers with aggregate

Sam discusses self leveling underlayments, as well as when, where and how to extend them with a variety of…

Novoplan 2 Plus

Show products

Featured Products

Novoplan 2 Plus

Novoplan 2 Plus is a high-strength, self-leveling, cement-based underlayment and repair mix for interior concrete and engineer-approved floors.

Add to APP, Technical Tutorials

Overhead and vertical mortar repairs with Planitop X and Planitop XS

Sam describes concrete repair mortars and two product options available, noting their differences and best…

Planitop X

Planitop XS

Show products

Featured Products

Planitop X

Planitop X is a one-component, fiber-reinforced, shrinkage-compensated, high-early-strength, fast-setting, polymer-modified, high-build cementitious repair mortar with a corrosion inhibitor.

Planitop XS

Planitop XS is an extended-working-time variation of Planitop X . Shrinkage-compensated, fiber-reinforced, polymer-modified and containing a corrosion inhibitor, Planitop XS features Planitop X ’s outstanding workability and versatility. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions.

Technical Tutorials, Tech Tips

MTI-TV #13: Choosing the right caulk/sealant

Sam and Jim discuss the differences between silicone and acrylic caulks. To learn more about MAPEI caulks,…

Keracaulk S

Keracaulk U

Show products

Featured Products

Keracaulk S

Keracaulk S is a premium-grade, easy-to-use, easy-to-clean, siliconized, sanded acrylic caulk. It is available in select colors to match all of MAPEI’s grout colors.

Keracaulk U

Keracaulk U is a premium-grade, easy-to-use, easy-to-clean, siliconized, unsanded acrylic caulk. It is available in select colors to match all of MAPEI’s grout colors.

Technical Tutorials, Tech Tips

MTI-TV: Quick render mortar with Planitop 330 Fast

Sam describes render mortars and the importance of a flat substrate. To learn more about Planitop® 330 Fast…

Planitop 330 Fast

Show products

Featured Products

Planitop 330 Fast

Technical Tutorials, Tech Tips

MTI-TV: Skimcoating and patching with Planiprep SC

Sam discusses the product features and importance of a flat substrate. To learn more about Planiprep SC and…

Planiprep SC

Show products

Featured Products

Planiprep SC

Planiprep SC is a high-performance, polymer-modified, fiber-reinforced cement-based skimcoating and patching compound. Use Planiprep SC to skimcoat and smooth minor surface variations and defects on common substrates. Planiprep SC creates a strong, durable surface ready for almost any floor application. Its unique formulation mixes easily with water and produces an easy-to-apply patching compound. Rapid-setting Planiprep SC allows for fast-track flooring installations in 30 to 60 minutes after application, depending on thickness and environmental conditions.

Tech Tips, Technical Tutorials

MTI-TV: Reboot

Technical Tutorials, Tech Tips

MTI-TV #11: Choosing the right tile/stone sealer

Sam and Nick talk about sealers and their use. To learn more about MAPEI sealers and the whole line of…

UltraCare High-Gloss Sealer & Finish

UltraCare Grout Sealer

UltraCare Penetrating SB Stone, Tile & Grout Sealer

+ 1

Show products

Featured Products

UltraCare High-Gloss Sealer & Finish

UltraCare High-Gloss Sealer & Finish is a one-step, water-based formula that provides a durable high-gloss finish and maximum stain resistance. This product can also be used as a pre-grouting sealer. For interior use only, UltraCare High-Gloss Sealer & Finish is non-yellowing and resistant to ultraviolet light.

UltraCare Grout Sealer

UltraCare Grout Sealer is an affordable, water-based penetrating sealer that will provide protection against most common stains for sanded and non-sanded cement grout joints. It can also be used as a pre-grouting sealer.

UltraCare Penetrating SB Stone, Tile & Grout Sealer

UltraCare Low-Sheen Sealer & Finish

Low-Sheen Sealer & Finish UltraCare Low-Sheen Sealer & Finish is a one-step, water-based formula that provides a durable, low-sheen satin finish and maximum stain resistance. This product can also be used as a pre-grouting sealer. UltraCare Low-Sheen Sealer & Finish is non-yellowing and resistant to ultraviolet light.

Video Library

Topics

Technical Tutorials

Keep in touch