Video tutorials & spotlights

Webinars Reset filters

Webinars

Add to APP, Webinars

Tile Tech Talk - Exterior Installations (hosted by TTMAC)

Installing tile for exterior applications isn’t the same as for indoors. Get all the crucial info from MAPEI…

Add to APP, Webinars

MAPEI Webinar: System Solutions for Healthcare Facilities

Bidding a flooring install in a healthcare facility? These projects demand a wide range of installations and…

Add to APP, Webinars

MAPEI Webinar: ISO Certification More than a Stamp on a Package

What does the ISO stamp on a package mean and why should you look for it? Could using ISO-certified products…

Add to APP, Webinars

MAPEI and Structures Webinar – Corrosion Mitigation of Traditionally Reinforced Concrete Structures

Corrosion of reinforcing steel is the #1 reason for premature deterioration of concrete structures, as has…

Planiseal WR 100

Primer SN [NA]

Planibond 3C

+ 7

Show products

Featured Products

Planiseal WR 100

Planiseal WR 100 is a clear, high-performance, 100%-silane, penetrating water repellent and sealer designed to provide water repellency on concrete and masonry. It penetrates deeply, protecting new and existing substrates against moisture/chloride intrusion.

Primer SN [NA]

Primer SN [NA] is a two-component, filled, epoxy primer specifically designed to enhance adhesion of cementitious flooring systems and multilayer resin flooring, such as MAPEI’s Mapefloor products, Ultratop products, PlaniLevel products and Planitop EL multilayer epoxy resin flooring systems and multilayer traffic deck systems.

Planibond 3C

Planibond 3C is a three-component, cementitious, moisture-tolerant, water-based, epoxy-modified corrosion inhibitor and bonding agent.

Mapefloor PU 400 FC

Mapefloor PU 400 FC is a two-component, fast-curing, polyurethane basecoat specifically designed for use as a waterproofing membrane for elevated concrete surfaces where the Mapefloor parking deck system is utilized. With its high elongation and crack-bridging properties, Mapefloor PU 400 FC is suited as a basecoat layer on concrete substrates subject to vibration.

Mapefer 1K [NA]

Mapefer 1K [NA] is a one-component, anti-corrosion coating based on unique polymers, cementitious binders and corrosion inhibitors. Mapefer 1K [NA] is specially formulated for application on properly prepared reinforcing steel to inhibit oxidation and rust formation. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions.

Mapefloor PU Primer [NA]

Mapefloor PU Primer [NA] is a two-component, polyurethane-based primer that can be used for initial application of Mapefloor parking deck systems or as a recoat primer for already installed polyurethane deck systems.

Planiseal WR

Planiseal WR is a silane/siloxane-blend, water-repellent, transparent sealer that provides resistance to water, dirt and chlorides.

Planiseal WR 40

Planiseal WR 40 is a water-based, 40%-silane, penetrating water repellent and sealer designed to protect concrete and masonry against moisture/chloride intrusion.

Mapefloor Finish 450

Mapefloor Finish 450 is a two-component, solvent-free, aliphatic, polyurethane topcoat specifically designed to provide a protective wear coat for elevated concrete surfaces in areas that are exposed to direct sunlight.

Mapefloor Finish 415 NA

Mapefloor Finish 415 NA is a two-component, solvent-free, aromatic polyurethane topcoat specifically designed to provide a protective wear coat for elevated concrete surfaces where the Mapefloor parking deck system is utilized.

Add to APP, Webinars

MAPEI Webinar – Keraflex Mortars: Simplification and Consolidation

MAPEI’s Keraflex family of mortars covers most jobsite needs, including fast mixing and troweling; tenacious…

Keraflex SG

Keraflex Super

Keraflex RS

+ 1

Show products

Featured Products

Keraflex SG

Keraflex SG is a standard-grade, versatile, large-and-heavy-tile mortar and thin-set mortar for tile and stone installations on floors, walls and countertops. It is formulated as nonsag for walls and nonslump for floors. Keraflex SG is a polymer-modified mortar formulated with Easy Glide Technology ™ for ease of application and offers good adhesion to substrates and tile. It can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Keraflex Super

Keraflex Super is a highly versatile, nonsag/nonslump, large-and-heavy-tile mortar and thin-set mortar for tile and stone for installations on floors, walls and countertops. This polymer-modified mortar has a high content of a unique dry polymer, resulting in excellent adhesion to the substrate and tile, with enhanced resistance to freeze/thaw environments. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions. It is formulated with Easy Glide Technology™ for ease of application and with a consistency that allows adjustability when used with lippage control systems. Keraflex Super can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Keraflex RS

Keraflex RS is a fast-setting, highly versatile, large-and-heavy-tile mortar and thin-set mortar for tile and stone installation on floors, walls and countertops. It is formulated as nonsag for walls and nonslump for floors, allowing tiles to be grouted in as little as 3 to 4 hours after installation. Keraflex RS is a polymer-modified, smooth and creamy mortar formulated with Easy Glide Technology ™ for ease of application and offers excellent adhesion to substrates and tile. It can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Keraflex Plus

Keraflex Plus is a highly versatile, nonsag/nonslump, large-and-heavy-tile mortar and thin-set mortar for tile and stone installations on floors, walls and countertops. This polymer-modified mortar is formulated with Easy Glide Technology ™ for ease of application and offers excellent adhesion to substrates and tile. It can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Add to APP, Webinars

MAPEI Webinar – Adhesive Selection and Installation for LVT

There are a wide variety of adhesives on the market, but which ones work best when installing luxury vinyl…

Mapecontact MRT

Ultrabond ECO 373

Ultrabond ECO 360

+ 7

Show products

Featured Products

Mapecontact MRT

Mapecontact MRT is a double-sided, moisture-resistant tape for the rapid and permanent installation of a wide variety of resilient flooring types. It has been specifically designed to provide instant bond and instant utilization for residential and commercial floor installations. Mapecontact MRT is unaffected by high moisture conditions in concrete and can be installed without moisture testing.

Ultrabond ECO 373

Ultrabond ECO 373 is a super aggressive, pressure-sensitive adhesive that is designed for the installation of a wide variety of resilient flooring types. Ultrabond ECO 373 has been specifically formulated to provide extended working time and can be applied using a trowel or roller, depending on the level of tack that is required for the flooring that is being installed. Ultrabond ECO 373 can also be used for flash-coving installations using traditional installation methods.

Ultrabond ECO 360

Ultrabond ECO 360 is a proprietary, high-performance, wet-lay and pressure-sensitive adhesive designed specifically for installing homogeneous and heterogeneous solid vinyl flooring. With its strong, durable, moisture-resistant and alkali-resistant bond, it is ideal for commercial and institutional applications. Ultrabond ECO 360 has an excellent open time, develops strength quickly, performs well under rolling loads and resists indentation. Its low volatile organic content makes it ideal for use in occupied buildings such as hospitals and medical centers.

Ultrabond ECO 399

Ultrabond ECO 399 is a high-moisture-resistant, heavy-rolling-load-resistant, aggressive, pressure-sensitive adhesive with enhanced dimensional control properties designed to install a wide variety of resilient flooring types. Ultrabond ECO 399 can also be used for flash-coving installations using traditional installation methods.

Ultrabond ECO MS 4 LVT [NA]

Ultrabond ECO MS 4 LVT [NA] is a moisture-curing, one-component, silane-modified, hybrid-polymer adhesive specifically designed for the direct bonding of vinyl and rubber flooring in interior applications.

Ultrabond G19

Ultrabond G19 is a two-part, epoxy-modified, polyurethane reactive adhesive specially designed for the installation of floor coverings in high-performance applications in both interior and exterior applications.

Ultrabond ECO 811

Ultrabond ECO 811 is a high-performance, acrylic latex adhesive designed to provide an aggressive tack for installing all types of carpet tile. Ultrabond ECO 811 provides a secure, releasable adhesive base for standard PVC-backed carpet tile as well as for non-PVC-, polyolefin-, felt- and bituminous-backed carpet tile. It can also be used to bond fiberglass-reinforced vinyl sheet flooring.

Ultrabond ECO 350

Ultrabond ECO 350 is a proprietary formulation based on a MAPEI acrylic polymer. It offers the unique flexibility of installing floor coverings after a short flash time or once the adhesive exhibits pressure-sensitive characteristics. Easy to apply and low in odor, Ultrabond ECO 350 is perfectly suited for the installation of flooring in occupied environments.

Mapecoat 4 LVT [NA]

Two-Component, Water-Based, Aliphatic, Anti-Slip, Polyurethane Finish for LVT Mapecoat 4 LVT [NA] is a transparent protective finish that comes in matte (10 gloss) and semi-gloss (30 gloss) for luxury vinyl tile (LVT) in addition to other resilient flooring in horizontal and vertical applications. It provides a non-slip finish with high resistance to wear in residential and commercial environments, including wet areas such as tub surrounds and shower enclosures as well as dry areas that are subject to high foot traffic.

Ultrabond G21

Ultrabond G21 is a two-part, reactive adhesive with low volatile organic compounds (VOCs), designed for extreme indoor and outdoor flooring installations. This adhesive aggressively adheres all types of floor coverings to properly prepared metal, asphalt pavement and many other difficult-to-bond-to substrates.

Add to APP, Webinars

MAPEI Webinar – The Chemistry behind Tile Grouts, Caulks and Sealers

Do you install grout? Is it sometimes a struggle to get uniform results from floor to floor, even from one…

Mapesil T Plus

Keracolor S

Keracaulk S

+ 10

Show products

Featured Products

Mapesil T Plus

Mapesil T Plus is a professional-grade, 100%-silicone sealant with enhanced adhesion for use on multiple substrates. This product is specifically formulated for heavy traffic and expansion/movement joints exceeding both ASTM and ANSI standards.

Keracolor S

Keracolor S is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

Keracaulk S

Keracaulk S is a premium-grade, easy-to-use, easy-to-clean, siliconized, sanded acrylic caulk. It is available in select colors to match all of MAPEI’s grout colors.

Keracaulk U

Keracaulk U is a premium-grade, easy-to-use, easy-to-clean, siliconized, unsanded acrylic caulk. It is available in select colors to match all of MAPEI’s grout colors.

MAPEI Flexcolor CQ

MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install.

Kerapoxy IEG CQ

Kerapoxy IEG CQ is a water-cleanable, 100%-solids, epoxy grout with high chemical and stain resistance. It is a nonshrinking, nonsagging, fast-curing, ef orescence-free grout. Color-coated quartz dramatically improves its cleanability, so that Kerapoxy IEG CQ leaves very little lm residue during cleanup of excess grout with a grout oat. The color-coated quartz also eliminates pigment bleed, so tiles are not stained during installation. This grout is perfectly suited for use in commercial kitchens, meat packing houses, and any commercial and institutional oors that require daily cleaning with enzymatic cleaners. Kerapoxy IEG CQ is ideal for applications where high-strength, mold- and mildew-resistant grout joints are required. In addition, it has high temperature resistance and can be steam-cleaned.

Ultracolor Plus Max

Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect™ technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT™) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

Kerapoxy CQ

Kerapoxy CQ is a two-component, 100%-solids, epoxy grout and mortar that is nonsagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock ® technology to help protect against mold and mildew. Kerapoxy CQ does not contribute to efflorescence and has excellent resistance to chemicals, staining, alkalinity, chlorine, cracking and color deterioration.

Kerapoxy

Kerapoxy [NA] is a premium-grade, water-cleanable, 100%-solids, high-strength, chemical-resistant, nonsagging, epoxy grout and mortar that offers excellent stain and chemical resistance. This versatile product is ideal for a wide range of projects, from countertops to shopping malls to airport terminals.

MAPEI Flexcolor Design

MAPEI Flexcolor Design is a professional-grade, ready-to-use (RTU) specialty grout that allows you to “design your color,” any color. MAPEI Flexcolor Design is formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor Design is formulated with the latest innovation in recycled glass-bead aggregate that enhances cleanability and improves workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. This product is exclusively for National Brand Accounts and Commercial Projects. For complete information on samples and ordering, contact your local MAPEI architectural representative.

Keracolor U

Keracolor U is a premium-grade, preblended, polymer-modified unsanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/16" to 1/8" (1.5 to 3 mm).

Ultracolor Plus FA

Ultracolor Plus FA – with DropEffect ™ technology and CO 2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT ™ ) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

MAPEI Flexcolor 3D

MAPEI Flexcolor 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#5201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

Add to APP, Webinars

MAPEI Webinar – Combating High Moisture Conditions with MAPEI Patches

Moisture on a concrete subfloor does not necessarily mean that you can’t install flooring. Moisture must…

Planiprep PSC

Planiprep 4 LVT [NA]

Mapecem Quickpatch

+ 1

Show products

Featured Products

Planiprep PSC

Planiprep PSC is a fast-drying, cement-based, fiber-reinforced, polymer-modified patch and skimcoating compound designed for preparing concrete and wood substrates for flooring installation.

Planiprep 4 LVT [NA]

High-Moisture-Resistant Skimcoat and Embossing Leveler Planiprep 4 LVT [NA] is a premixed, high-moisture-resistant, water-based, acrylic-resin-based skimcoat and embossing leveler.

Mapecem Quickpatch

Mapecem Quickpatch is a high-performance, fast-setting, cementitious material used for the patching of concrete surfaces. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions.

Ultrabond ECO 995

Ultrabond ECO 995 is MAPEI’s premium, 100%-solids, one-component, moisture-curing urethane adhesive for all types of wood flooring and bamboo. Ultrabond ECO 995 can be used in a single-coat application method that provides a superior bond with moisture vapor emission control on concrete slabs. Ultrabond ECO 995 also provides sound-reduction properties, making it suitable for use in multi-unit housing projects.

Webinars, Add to APP

MAPEI Webinar: Tile Grout, Caulk, and Care and Maintenance Solutions

MAPEI offers a wide selection of grouts, caulks, and care and maintenance solutions. Choosing which to use,…

Mapesil T Plus

Keracolor S

Keracaulk S

+ 10

Show products

Featured Products

Mapesil T Plus

Keracolor S

Keracaulk S

Keracaulk S is a premium-grade, easy-to-use, easy-to-clean, siliconized, sanded acrylic caulk. It is available in select colors to match all of MAPEI’s grout colors.

Keracaulk U

Keracaulk U is a premium-grade, easy-to-use, easy-to-clean, siliconized, unsanded acrylic caulk. It is available in select colors to match all of MAPEI’s grout colors.

MAPEI Flexcolor CQ

Kerapoxy IEG CQ

Ultracolor Plus Max

Kerapoxy CQ

Kerapoxy

MAPEI Flexcolor Design

Keracolor U

Ultracolor Plus FA

MAPEI Flexcolor 3D

Webinars, Add to APP

MAPEI Webinar: The Science of Moisture-Related Failures and How They Can Be Prevented

Looking for concrete facts and not best guesses? What are the best methods for blocking moisture from…

Add to APP, Webinars

MTI Online: Waterproofing and Membranes

Can the same waterproofing that is used for second-floor bathrooms be used to waterproof outdoor balcony…

Mapelastic HPG

Reinforcing Fabric

Mapeband

+ 8

Show products

Featured Products

Mapelastic HPG

Mapelastic HPG is a ready-to-use, highly flexible, liquid acrylic waterproofing membrane for installation under ceramic tile or stone on residential and light commercial interior floors and walls. Applied with a roller, trowel or brush, Mapelastic HPG has excellent compatibility with cement-based mortars. When installed with MAPEI’s Fiberglass Mesh , Mapelastic HPG can also be used as a crack-isolation membrane and exceeds ANSI A118.10-L standards for waterproofing. In addition, Mapelastic HPG is IAPMO-listed for use as a shower-pan liner.

Reinforcing Fabric

MAPEI’s Reinforcing Fabric is a strong, absorbent, flexible, alkali-resistant, polyester reinforcing fabric for optional use with MAPEI’s Mapelastic ® AquaDefense , Mapelastic WaterStop and Mapelastic Turbo as well as Mapelastic WP and Mapelastic WRB membranes when installed under ceramic tile or stone on residential and commercial interior applications. Reinforcing Fabric is ideal for use over substrate areas such as cracks, coves, corners and areas around drains when used with Mapelastic AquaDefense , Mapelastic WaterStop and Mapelastic Turbo . Reinforcing Fabric provides a durable, reliable barrier to water migration into adjacent areas. It can easily be cut to size with scissors or a razor knife, and it has excellent compatibility with all MAPEI cement- or epoxy-based grouts and mortars.

Mapeband

Mapeband cove roll and drain flashing are flexible, rubber-coated polyester accessories for waterproofing. They are designed for fast, easy embedment with MAPEI’s Mapelastic 315 , Mapelastic HPG , Mapelastic AquaDefense , Mapelastic WaterStop and Mapelastic Turbo waterproofing membranes over coves, corners and drains, as well as expansion and movement joints.

Mapelastic AquaDefense

Mapelastic AquaDefense is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional Reinforcing Fabric or Mapeband ™ accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10-LV and ANSI A118.12 standards.

Mapeguard Combo Pack

Mapeguard Combo Pack consists of inside corners, outside corners, pipe collar and valve collar components packaged together in a kit. This kit offers a convenient, fast and easy way to seal around curbs, inside corners, outside corners, pipes, shower heads and shower mixing valves in wet areas to provide waterproofing and vapor management protection, when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Mapeguard POC

Mapeguard POC is a thin, flexible, alkali-resistant, polyethylene membrane coated on both sides with a nonwoven polypropylene fabric. It offers a fast and easy way to seal outside corners, curbs or return walls in wet areas where walls/curbs and floors meet, providing waterproofing and vapor management protection when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Mapeguard PIC

Mapeguard PIC is a thin, flexible, alkali-resistant, polyethylene membrane coated on both sides with a nonwoven polypropylene fabric. It offers a fast and easy way to seal inside corners in wet areas where walls and floors meet, providing waterproofing and vapor management protection when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Mapeguard VC

Mapeguard VC is a thin, flexible, alkali-resistant, polyethylene membrane coated on both sides with a nonwoven polypropylene fabric engineered with a stretchable rubber center. It provides a fast and easy way to seal around shower mixing valves in wet areas, providing waterproofing and vapor management protection when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Mapeguard WP ST

Mapeguard WP ST is a fast and easy way to cover seams and wall upturns to provide waterproofing and vapor management protection when installing Mapeguard WP 200 waterproofing sheet membrane for ceramic tile and stone.

Mapeguard WP 200

Mapeguard WP 200 is a thin, flexible polyethylene sheet membrane with a nonwoven, polypropylene fabric on both sides, used for both waterproofing and crack isolation in interior/exterior residential and commercial applications. The laminated fabric webbing is designed to anchor the membrane to the substrate and tiles to the membrane using the bonded thin-set method with recommended, polymer-modified mortars. Mapeguard WP 200 ’s low perm rating performance is ideal for vapor protection in showers, wet areas and steam rooms.

Mapelastic Turbo [NA]

Mapelastic Turbo [NA] is a two-component, rapid-drying, cementitious-binder-based membrane with fine-grained selected aggregates, special admixtures and synthetic polymers in water dispersion for interior and exterior installations under ceramic tile or stone in residential, commercial and industrial intermittent wet or submerged environments. Applied easily with a roller or brush, Mapelastic Turbo [NA] provides an excellent barrier to protect adjacent rooms and floors below from water damage. Mapelastic Turbo [NA] exceeds ANSI A118.10-LV and ANSI A118.12 standards and is compatible with polymer-modified cement-based mortars (ANSI A118.4 or better) or epoxy mortars (ANSI A118.3).

Add to APP, Webinars

MAPEI Webinar: How to Order a Custom Mapeheat Mat

How do you measure a room for a custom floor-heating mat? The process is simple. This quick and…

Mapeheat Mat Repair Kit

Mapeheat Mat

Show products

Featured Products

Mapeheat Mat Repair Kit

Mapeheat Mat Repair Kit contains all materials needed to repair Mapeheat Mat that has been damaged.

Mapeheat Mat

Pre-Wired, Floor-Heating Fabric Mapeheat Mat is a pre-wired, radiant floor-heating fabric designed for easy installation. Embedded in the fabric, the heating wires are evenly spaced and guarantee even heat distribution with no cold spots. Mapeheat Mat is available in more than 70 standard sizes and can also be custom-sized to accommodate curves, angles and obstructions. Each mat’s compact 1/8'' (3 mm) profile creates minimal floor buildup, and floor coverings can be immediately installed.

Add to APP, Webinars

Sustainability 101

What is the most common environmental building program? What is the most important environmental…

Add to APP, Webinars

MAPEI Webinar: The Science of Floor Covering Adhesives and How They Relate to MAPEI Products

With all of the flooring adhesives on the market, how do you decide which ones to use? Does it matter? Can…

Ultrabond ECO 373

Ultrabond ECO 360

Ultrabond ECO 399

+ 20

Show products

Featured Products

Ultrabond ECO 373

Ultrabond ECO 360

Ultrabond ECO 399

Ultrabond ECO 185

Ultrabond ECO 185 is a latex-based adhesive that offers fast grab and quick leg development for the fast-track installation of commercial carpet. It can be used in direct-bond and double-stick carpet applications.

Ultrabond ECO MS 4 LVT [NA]

Ultrabond G19

Ultrabond ECO 711

Ultrabond ECO 711 is a latex-based adhesive that offers a quick drying time with enhanced grab and slip resistance for vinyl composition tile (VCT) installations. Ultrabond ECO 711 is translucent when dry, allowing layout lines to be easily seen.

Ultrabond ECO 220

Ultrabond ECO 220 is a high-solids, latex-based adhesive designed specifically for installing carpet and felt-backed vinyl sheet flooring. Its unique formulation is perfectly suited for commercial flooring applications where heavy traffic is expected. Ultrabond ECO 220 also exhibits an extended working time, making it ideal for the installation of patterned carpets. It may be used in both direct and double glue-down installation methods for carpet.

Ultrabond ECO 570

Ultrabond ECO 570 is a moisture-curing, one-component, polyurethane polymer adhesive specifically designed for the direct bonding of high-performance reground-rubber sports flooring in interior or exterior applications. Its unique formulation is perfectly suited for most types of reground-rubber sports flooring and provides an aggressive and durable bond. Ultrabond ECO 570 utilizes rapidly renewable raw materials as part of the formulation and is free of phthalate plasticizers.

Ultrabond ECO 901

Ultrabond ECO 901 adhesive has been specifically formulated as a bonding agent for fiberglass reinforced plastic (FRP) panels.

Ultrabond ECO 811

Ultrabond ECO 350

Ultrabond ECO 575 [NA]

Ultrabond ECO 575 [NA] is a premium wall-base adhesive specifically designed to provide superior bond and impact resistance for rubber, vinyl and carpet wall base. Ultrabond ECO 575 [NA] also has been reformulated to offer even greater grab and wet strength, keeping corners wrapped tight. Its light-colored, water-based, acrylic-polymer formulation won't stain even the whitest wall base.

Ultrabond ECO MS 4 LVT Wall [NA]

Ultrabond ECO MS 4 LVT Wall [NA] is a moisture-curing, one-component, thixotropic, silane-modified polymer adhesive specifically designed for the direct bonding of various resilient flooring types in both wall and floor installations.

Ultrabond ECO 980

Ultrabond ECO 980 is a 100%-solids, one-component, moisture-cured urethane adhesive specifically designed for the installation of domestic and exotic solid and engineered wood flooring, including bamboo.

Ultrabond ECO 975

Ultrabond ECO 975 is a 100%-solids, one-component, moisture-cured, urethane adhesive specifically designed for the installation of domestic solid and engineered wood flooring.

Ultrabond ECO 985

Ultrabond ECO 985 is MAPEI’s premium single-component, hybrid-polymer-based wood-flooring adhesive that is formulated without water, solvents, amines, isocyanates, phthalate plasticizers or epoxy resins, and has an extremely low emission level of volatile organic compounds (VOCs). Ultrabond ECO 985 ’s formulation provides excellent sound-reduction properties that are required for multi-unit housing. Ultrabond ECO 985 is also a moisture-controlling wood-flooring adhesive that protects wood flooring from moisture vapor emitting through concrete slabs in a single application.

Ultrabond ECO 983

Ultrabond ECO 983 is a single-component, 100%-solids, modified-silane wood-flooring adhesive that is formulated without water, solvents, amines, isocyanates, phthalate plasticizers or epoxy resins. With an extremely low emission level of volatile organic compounds (VOCs), the unique formulation of Ultrabond ECO 983 provides excellent bond strength and moisture control up to 15 lbs. (6.80 kg) MVER and 90% relative humidity (RH). Special trowel clips are provided to apply the adhesive in a monolithic layer for subfloor moisture control. It can also be used with traditional trowel-applied methods where suboor moisture problems do not exist.

Ultrabond ECO 977

Ultrabond ECO 977 is a fast-setting, 100%-solids, one-component, moisture-cured urethane adhesive specifically designed for the installation of domestic solid and engineered wood flooring. Ultrabond ECO 977 can also be used in elevated subfloor moisture conditions of up to 12 lbs. (5.44 kg) MVER and 95% relative humidity when a specific installation method and trowel notch configurations are used.

Ultrabond ECO 907

Ultrabond ECO 907 is a fast-curing, 100%-solids, moisture-curing, gun-grade adhesive designed for basic wood subfloor construction practices as well as repairing of wood flooring; bonding of wood stair nosings; installation of wood molding and baseboards; and attachment of tackstrips to concrete subfloors. Ultrabond ECO 907 is also ideal for supplemental bonding of wide plank boards when nailing and gluing are required.

Ultrabond ECO 995

Ultrabond G21

Ultrabond ECO 20

Ultrabond ECO 20 has been designed to provide both value and performance in a standard flooring adhesive. Its unique formulation provides ample working time for installing felt-backed vinyl sheet flooring, smooth-backed carpet and rough-backed carpet.

Webinars

MAPEI Webinar – ANSI A118.15 Improved Modified Dry-Set Mortar, LHT and ANSI Mortar Designations

Heard about the new ANSI mortar designation for LHT mortars? Do you know how it will affect your jobsites and…

Ultraflex LHT

Ultraflex LFT

Show products

Featured Products

Ultraflex LHT

Ultraflex LHT is a nonsag, large-and-heavy-tile mortar and thin-set mortar for large-format and heavy tile and stone for interior/exterior installations on floors, walls and countertops. Ultraflex LHT is designed for use at 1/2" (12 mm) thickness to give better support under large-format tile. This polymer-modified mortar is formulated with Easy Glide Technology™ for ease of application with excellent adhesion to the substrate and tile.

Ultraflex LFT

Ultraflex LFT is a premium, nonsag, large-and-heavy-tile mortar and thin-set mortar designed for large-format and heavy tile and stone for interior/exterior floor, wall and countertop installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions. It is formulated with Easy Glide Technology™ for ease of application.

Add to APP, Webinars

MAPEI Webinar – Elastocolor Coatings: High-Performance Protection and Durable Color Design

Elastocolor Coat

Elastocolor Primer WB

Elastocolor Texture

+ 2

Show products

Featured Products

Elastocolor Coat

Elastocolor Coat is a water-based, high-build, 100%-acrylic coating designed to protect and decorate above-grade, exterior/interior vertical concrete, masonry, stucco, fiber-reinforced polymer (FRP) composites and EIFS systems. Elastocolor Coat is available in two textures (smooth and fine), in a wide range of standard colors and in an unlimited number of custom colors to increase its design versatility.

Elastocolor Primer WB

Elastocolor Primer WB is a clear, water-based, 100%-acrylic primer for use with Elastocolor coatings. Elastocolor Primer WB improves adhesion on porous, dusting and new substrates.

Elastocolor Texture

Elastocolor Texture is a specially designed coating for use on exterior, above-grade, new and previously coated concrete and masonry surfaces. Elastocolor Texture ’s unique blend of aggregates produces an attractive, high-build, textured finish. It is ideal for use on restoration projects to reduce the appearance of surface imperfections and repairs or wherever a uniform textured finish is desired. Elastocolor Texture remains highly flexible and offers excellent filling properties and adhesion to prepared substrates.

Elastocolor Primer AR

Elastocolor Primer AR is a specially designed primer for use on exterior, above-grade, new and previously coated concrete and masonry surfaces. Elastocolor Primer AR will protect subsequent coatings from the damaging effects of high pH present in freshly placed cement-based products. It remains highly flexible, offers excellent filling and adhesion on prepared substrates, and is designed for compatibility with MAPEI’s Elastocolor coating systems.

Elastocolor Flex

Elastocolor Flex is an elastomeric, high-build, water-based, 100%-acrylic coating to protect and decorate above-grade, vertical exterior concrete, masonry, stucco and EIFS systems. Elastocolor Flex is available in two textures (smooth and fine), in a wide range of standard colors and in an unlimited number of custom colors to increase its design versatility.

Webinars

MAPEI Webinar – Selecting and Specifying Ceramic Tile with ANSI and ISO Standards

How do ANSI and ISO standards affect jobsites and specifications? Do they apply to every job? Learn how…

Ultraflex LFT

MAPEI Flexcolor CQ

Ultrabond ECO GPT

Show products

Featured Products

Ultraflex LFT

MAPEI Flexcolor CQ

Ultrabond ECO GPT

Ultrabond ECO GPT is a single-component, nonsag, easy-to-trowel, hybrid-polymer-based adhesive technology specially designed for the installation of gauged porcelain tile and gauged porcelain tile panels/slabs on interior/exterior vertical surfaces and countertops. Unique technology advancements are incorporated in the formulation of Ultrabond ECO GPT for delivering instant grab, while allowing for the needed adjustability of panels and large-format tile. Superior bonding performance is complemented with flexibility, deformability and quick-curing characteristics to meet the demands of installing gauged porcelain tile, panels and slabs with application-friendly properties.

Webinars, Add to APP

MAPEI Webinar – Mortar Selection Simplified Keraflex Technology to the Rescue!

Want to learn more about Keraflex technology? Check out this Webinar covering the features and benefits of…

Keraflex SG

Keraflex Super

Keraflex RS

+ 1

Show products

Featured Products

Keraflex SG

Keraflex Super

Keraflex RS

Keraflex Plus

Add to APP, Webinars

MAPEI Webinar – An Introduction to UTT and Tunnel Boring Machines

Tunneling and mining are just two of the many solutions provided by MAPEI’s Underground Technology Team…

Add to APP, Webinars

MAPEI Webinar – Best Practices for Synthetic Turf Adhesives

Whether you are installing turf indoors or out, in hot or cold weather, MAPEI offers a variety of…

Ultrabond Turf PU 1K-HV

Ultrabond Turf PU 1K-LV

Ultrabond Turf PU 2K

+ 5

Show products

Featured Products

Ultrabond Turf PU 1K-HV

Ultrabond Turf PU 1K-HV is a high-viscosity, moisture-curing, one-component, urethane adhesive specifically designed for bonding of synthetic turf in high-performance sports installations. Offering excellent weather resistance, Ultrabond Turf PU 1K-HV can be used in interior and exterior applications. It meets FIFA requirements for bond strength in sports-turf applications.

Ultrabond Turf PU 1K-LV

Ultrabond Turf PU 1K-LV is a fast-setting, moisture-curing, polyurethane adhesive specifically designed for full glue-down applications with smooth-backed synthetic turf, such as for batting cages and lacrosse fields. The low-viscosity formula can be troweled or sprayed via an airless pump sprayer. Ultrabond Turf PU 1K-LV is also suitable for repairs, curbs/edging and detail work.

Ultrabond Turf PU 2K

Ultrabond Turf PU 2K is a high-performance, two-component, fast-set, urethane adhesive designed for the high-performance seaming and direct bonding of synthetic turf used in athletic and landscape applications. Ultrabond Turf PU 2K is particularly suited for use in areas of low ambient relative humidity and in cool temperatures. Ultrabond Turf PU 2K is colored green to blend in with most synthetic turf products and cures within 2 to 4 hours to a tough, durable bond. Ultrabond Turf PU 2K provides seam strengths that exceed FIFA standards.

Ultrabond Turf PU 2K Accelerator

Ultrabond Turf PU 2K Accelerator is an additive designed for Ultrabond Turf PU 2K to allow for quicker setting and curing times. Ultrabond Turf PU 2K Accelerator is ideal for temperatures below 50°F (10°C) to allow Ultrabond Turf PU 2K to achieve standard curing rates. At a wide range of ambient temperatures, the curing time can be shortened to allow for faster installs and repairs.

Ultrabond Turf PU 1K

Ultrabond Turf PU 1K is a fast-setting, moisture-curing, one-component, urethane adhesive specifically designed for bonding of synthetic turf in high-performance sports installations. Offering excellent weather resistance, Ultrabond Turf PU 1K can be used in interior and exterior applications. It meets FIFA requirements for bond strength in sports-turf applications.

Ultrabond Turf MS

Ultrabond Turf MS is a high-tack, fast-setting, one-component, modified-silane hybrid adhesive designed for installation of high-performance synthetic sports turf. Ultrabond Turf MS meets FIFA bond requirements and is suitable for installation in most weather conditions. Ultrabond Turf MS is colored green to blend in with most synthetic turf products.

Ultrabond Landscape Turf CG

Ultrabond Landscape Turf CG is a commercial-grade adhesive ideal for indoor and outdoor landscaping synthetic turf installations. Ultrabond Landscape Turf CG has excellent all-weather resistance with superior bond strength and can be used for full spread and seaming installations.

Ultrabond Turf Tape

Ultrabond Turf Tape is a PET-based, spun-bonded, nonwoven fabric tape designed specifically to work with MAPEI turf adhesives for seaming synthetic turf. Ultrabond Turf Tape is waterproof and provides superior tensile strength and tear resistance, which are vital for installations of professional athletic playing fields. It is also perfectly suited as a seaming base for other synthetic turf applications, including installations of residential landscaping, playgrounds and golf courses.

Add to APP, Webinars

MAPEI Webinar – Advances in Primary Below-Grade Waterproofing

Are you positively confused about positive- and negative-side waterproofing? Get answers here in this…

Add to APP, Webinars

MAPEI Webinar – Strengthening of Bridges with the MapeWrap Fiber-Reinforced Polymer (FRP) System

Whether used to increase the load-bearing capacity of a structure, or to restore loss of capacity from damage…

MapeWrap Primer 1

MapeWrap 31

MapeWrap 21

+ 2

Show products

Featured Products

MapeWrap Primer 1

MapeWrap Primer 1 is a 100%-solids, moisture-tolerant, low-viscosity, two-component, epoxy resin that is used as a seal coat for consolidating and priming concrete substrates. As the first component of the MapeWrap composite system, MapeWrap Primer 1 penetrates cementitious pore structures and provides a high bond for the other system components.

MapeWrap 31

MapeWrap 31 is a 100%-solids, moisture-tolerant, medium-viscosity, epoxy resin for impregnating MapeWrap composite system fabrics by a dry layup method. MapeWrap 31 was specially developed to saturate and encapsulate carbon and glass fiber fabrics and to cure to a high-performance laminate. Once cured, MapeWrap 31 provides high mechanical strength properties.

MapeWrap 21

MapeWrap 21 is a 100%-solids, moisture-tolerant, low-viscosity, epoxy resin used to encapsulate the MapeWrap composite system fabrics. MapeWrap 21 was specially developed to saturate and encapsulate carbon and glass fiber fabrics and to cure to a high-performance laminate. Once cured, the laminate provides additional strength to appropriate structural elements.

MapeWrap 12

MapeWrap 12 is a two-component, 100%-solids, moisture-tolerant, structural epoxy used as an adhesive for the Carboplate composite system in warm climates. MapeWrap 12 is also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod C laminates.

MapeWrap 11

MapeWrap 11 is a two-component, 100%-solids, moisture-tolerant, structural epoxy used as an adhesive for the Carboplate composite system in horizontal, vertical and overhead applications. MapeWrap 11 is also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod C laminates.

Add to APP, Webinars

MAPEI Webinar – Waterproofing Decks and Balconies

When you think of decks and balconies, you think of gatherings and terrace plants or pools – not weight and…

Planiseal 288

Mapedrain 10

Mapedrain 20

+ 6

Show products

Featured Products

Planiseal 288

Planiseal 288 is a slightly flexible, two-component, polymer-modified, cementitious waterproofing and protective mortar for concrete and masonry.

Mapedrain 10

Moderate-Strength, Intermediate-Flow, Prefabricated Drainage Composite Mapedrain 10 is a moderate-strength, three-dimensional drainage composite. It consists of a nonwoven filter fabric bonded to individual dimples of a molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. The filter fabric allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core.

Mapedrain 20

Mapedrain 20 is a high-strength, three-dimensional drainage composite. It consists of a nonwoven filter fabric bonded to individual dimples of a molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. The filter fabric allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core.

Mapedrain TD Drainage Composite

Mapedrain TD Drainage Composite is a high-strength, three-dimensional modular drainage and collection composite for foundations. It consists of a nonwoven filter fabric that is bonded to and wrapped around a molded polypropylene core, minimizing fabric intrusion into the drainage channels that can be caused by overburden pressure. The filter fabric allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core. Mapedrain TD Drainage Composite is designed to replace a conventional gravel-covered pipe drain.

Mapedrain 50

Mapedrain 50 is an extra high-strength, three-dimensional drainage composite. It consists of a woven filter fabric bonded to individual dimples of a molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. The filter fabric allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core. Mapedrain 50 ’s woven, monofilament fabric withstands high abrasion from applied overburden and prevents intrusion into the drainage core due to its low elongation characteristics. As such, the woven fabric is better suited to receive direct poured concrete than nonwoven geotextile fabrics.

Mapedrain 30

High-Strength, High-Flow, Prefabricated Drainage Composite with Woven Filter Fabric Mapedrain 30 is a high-strength, three-dimensional drainage composite. It consists of a woven filter fabric bonded to individual dimples of a molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. The filter fabric allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core. Mapedrain 30 ’s woven, monofilament fabric withstands high abrasion from applied overburden and prevents intrusion into the drainage core due to its low elongation characteristics. As such, the woven fabric is better suited to receive direct poured concrete than nonwoven geotextile fabrics.

Mapedrain 40

Mapedrain 40 is a high-strength, three-dimensional drainage composite. It consists of a high-performance, heavyweight nonwoven filter fabric bonded to individual dimples of a molded polypropylene core, minimizing fabric intrusion into the drainage channels caused by overburden pressure. Mapedrain 40 ’s 8-ounce (227-gram) nonwoven fabric provides superior filtration. This allows water to pass freely into the drainage core, which provides hydrostatic relief while preventing the passage of soil or sand particles that might clog the core.

Mapedrain TD Fittings

Mapedrain TD Fittings consist of end outlet, side outlet, splice and corner fittings that are made out of polyethylene and assist in installing Mapedrain TD Drainage Composite . The end outlet fitting connects the end of Mapedrain TD Drainage Composite to a 4" (10 cm) corrugated pipe. The side outlet fitting connects the side of Mapedrain TD Drainage Composite to a 4" (10 cm) corrugated pipe. The splice fitting connects two pieces of Mapedrain TD Drainage Composite end to end. And the corner fitting connects two pieces of Mapedrain TD Drainage Composite together, at the inside or outside corners of a building.

Planiseal 88

Planiseal 88 is a one-component, polymer-modified, cementitious coating for waterproofing, including masonry surfaces, at a maximum depth of 10 feet (3,05 m). Planiseal 88 is also used as a surface-preparation product for MAPEI waterproofing products.

Add to APP, Webinars

MAPEI Webinar – Navigating Self-Leveler and Primer Options

Why do you have to use primer with self-leveling compounds? Why are there so many primers and self-levelers?…

MAPEI Self-Leveling Mixing Barrel Cart

MAPEI Self-Leveling Mixing Barrel

MAPEI Self-Leveling Mixing Kit

+ 11

Show products

Featured Products

MAPEI Self-Leveling Mixing Barrel Cart

Barrel Cart for Mixing Self-Levelers MAPEI Self-Leveling Mixing Barrel Cart is designed to improve efficiency in barrel-mixing MAPEI self-leveling underlayments, toppings and mortars that require jobsite mixing. The cart’s barrel band attaches snugly to the MAPEI Self-Leveling Mixing Barrel (sold separately), holding it fast during mixing and keeping it in place during material pouring/placement. MAPEI Self-Leveling Mixing Barrel Cart has been designed to roll easily over textured surfaces and enables easy, precise placement of the mix. The double-handle design allows for the cart to be easily moved and tipped, reducing strain on the cart body and controlling the material placement.

MAPEI Self-Leveling Mixing Barrel

Mixing Barrel for Self-Leveling Products MAPEI Self-Leveling Mixing Barrel is perfect for the blending of cement and gypsum self-leveling underlayments, toppings and pourable mortars. The barrel easily holds up to three 50-lb. (22.7-kg) bags of material and works perfectly in conjunction with oval-shaped mixers. Two types of handles (grab handles and recessed handles) make this barrel easy to move. Used along with MAPEI Self-Leveling Mixing Barrel Cart , this barrel eases the mixing and transport process of any material that requires mixing and dispensing on commercial or residential jobsites.

MAPEI Self-Leveling Mixing Kit

MAPEI Self-Leveling Mixing Kit consists of a 15-gallon (56.8 L) double-handled mixing barrel with a lid, 1" (2.5 cm) spike shoes, a 5-quart (4.73 L) measuring pitcher, an oval mixing paddle, a smoother, a gauge rake and a three-part broom handle.

Primer L

Primer L is a concentrated, solvent-free acrylic primer used before the installation of underlayment materials. It is green for easy identification. Primer L improves the bond between a properly prepared and profiled concrete substrate, and a self-leveling underlayment. Primer L can also be used as a primer for gypsum-based underlayments and patches.

Ultraplan M20 Plus

Ultraplan M20 Plus is a calcium-aluminate-based, quick-setting, self-leveling underlayment and topping. It is specially formulated for the resurfacing and construction of interior horizontal surfaces as a high-compressive-strength underlayment with maximum resistance to wheel tracking and indentations. Ultraplan M20 Plus is suitable for use as a commercial wear topping in warehouse and alternate industrial applications where an exceptional flat and smooth concrete surface is desired.

Ultraplan Lite

Ultraplan Lite is a polymer-modified, calcium-aluminate-based, lightweight, self-drying, self-leveling underlayment. It has been specifically designed for use for leveling substrates that are not rated to carry the full weight of a traditional self-leveling underlayment. Ultraplan Lite mixes easily and flows out to a suitable finish with a final dry density of about 67 lbs. per cu. ft. (1 073 kg per m 3 ) at 28 days.

Novoplan DPL

Novoplan DPL is a self-leveling, calcium-aluminate-based underlayment and repair mix for interior concrete and engineer-approved floors and is capable of being placed up to 4" (10 cm) in a single lift.

Novoplan HFL

Novoplan HFL is a self-leveling, calcium-aluminate-based underlayment and repair mix for interior concrete and engineer-approved floors with high-flow characteristics.

Primer T

Primer T is a low-VOC, magenta-colored, water-based acrylic primer that enhances the performance and adhesion of self-leveling underlayments (SLUs) on nonporous and porous substrates. Suitable for a wide variety of substrates, Primer T combines excellent versatility with easy, low-odor application.

Novoplan 2 Plus

Novoplan 2 Plus is a high-strength, self-leveling, cement-based underlayment and repair mix for interior concrete and engineer-approved floors.

Ultraplan 1 Plus

Ultraplan 1 Plus is a quick-setting, self-leveling, self-drying underlayment and repair mix for interior concrete and engineer-approved floors. Ultraplan 1 Plus has high strength and is abrasion-resistant, able to withstand light foot traffic after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.

Ultraplan Extreme 2

Ultraplan Extreme 2 is an advanced, hydraulic-cement-based, self-leveling compound designed for fast-track underlayment applications. It is especially formulated for leveling interior, horizontal concrete surfaces where environmental controls are not operational or the building is not enclosed. Once installed, Ultraplan Extreme 2 is not affected by exposure to intermittent rain exposure after 6 hours or to freezing temperatures after 3 days of curing. Its high compressive strength is designed to allow it to be exposed to traffic as a temporary wear layer until the floor is covered with floor covering. Ultraplan Extreme 2 has no moisture vapor emission limitations and can be installed without testing on properly prepared concrete substrates. It is the self-leveling compound of choice for use under moisture-controlling adhesive systems and epoxy moisture barriers.

ECO Prim Grip

ECO Prim Grip is a ready-to-use, low-VOC, synthetic resin-based primer with bond-promoting silica aggregates suspended in dispersion. It enhances the performance and adhesion of mortars to existing ceramics and difficult-to-bond-to substrates. Plus, it improves bonding of self-leveling underlayments (SLUs) and bonds of render coats over cementitious substrates. Suitable for a wide variety of substrates, ECO Prim Grip combines excellent versatility with an easy, low-odor application.

Primer X

Primer X is a fast-drying, high-performance, low-VOC, water-based, acrylic primer. It is textured to enhance the performance and adhesion of self-leveling underlayments over 100%-solids, epoxy moisture barriers and other nonporous substrates

Add to APP, Webinars

MAPEI Webinar - FRP Strengthening Strengthening Concrete Structures with Fiber Reinforced Polymers

Using fiber-reinforced polymers to strengthen concrete structures is an effective and efficient method of…

Add to APP, Webinars

MAPEI Webinar - Keraflex Family of Mortars

Want to learn more about Keraflex technology? Check out this Webinar covering the features and benefits of…

Keraflex SG

Keraflex Super

Keraflex RS

+ 1

Show products

Featured Products

Keraflex SG

Keraflex Super

Keraflex RS

Keraflex Plus

Add to APP, Webinars

MAPEI Webinar — Health and the Environment: Low-Emitting Materials

Green building standards and certification programs are increasingly important on jobsites, but what does all…

Add to APP, Webinars

MAPEI Webinar: Systems and Solutions for Gauged Porcelain Tile Panels and Slabs

The ANSI A108.19 standard for the installation of gauged porcelain tile panels and slabs can change the way…

4 to 1 Mud Bed Mix

Ultraflex LFT

Keraflex Super

+ 6

Show products

Featured Products

4 to 1 Mud Bed Mix

4 to 1 is a preblended mixture of finely graded sand and Portland cement used for thick-bed mortar installations. 4 to 1 flattens and levels an existing substrate before the installation of tile and stone.

Ultraflex LFT

Keraflex Super

Planislope RS

Planislope RS is a rapid-setting, pre-blended, cement-based, polymer-modified mortar that includes a blend of select aggregates for use in sloping and thick-bed mortar installations. It only needs mixing with water to produce a mortar of exceptional strength. Used for preparing a substrate before the installation of tile and stone, Planislope RS is designed for pre-sloping under waterproofing membranes and mortar beds in showers when quick turnarounds are desired.

Ultrabond ECO GPT

Modified Mortar Bed

Modified Mortar Bed is a pre-blended, cement-based, polymer-modified thick-bed and render mortar that includes a blend of selected aggregates. Rather than requiring the use of a latex additive, it only needs mixing with water to produce a thick bed mortar of exceptional strength.

Planitop 330 Fast

Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching and leveling mortar for interior and exterior walls, floors and submerged areas. It can be applied from 1/8" to 1-1/4" (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces. Eliminating the need for a latex additive, Planitop 330 Fast requires only mixing with water to produce a non-sagging mortar that is ready for tile installation in as little as 90 minutes.

Mapecem Quickpatch

MAPEI Ultralite S2

MAPEI Ultralite S2 is a premium-grade, lightweight, single-component thin-set mortar that is ideal for installation of gauged (formerly “thin”) porcelain tile. This high-performance, highly deformable, polymer-modified mortar is formulated with Easy Glide Technology™ for ease of application. MAPEI Ultralite S2 features a long open time and superior transfer properties to enhance back-buttering, and can be used also for ceramic tile and stone. MAPEI Ultralite S2 ’s unique Ultralite Technology™ provides twice the coverage of a standard thin-set mortar per pound/kg and may contribute to LEED points with 20% recycled content.

Add to APP, Webinars

MAPEI Webinar - Installing Epoxy Grout in Commercial Settings

Installing Epoxy Grout in Commercial Settings

Add to APP, Webinars

MAPEI Webinar – Advances in Options for Wood Flooring Installations

Can any of MAPEI’s wood flooring adhesives be used to install unfinished hardwood flooring? What primer…

Add to APP, Webinars

MAPEI Webinar: Best Practices for Ceramic Tile and Stone – Efflorescence and Latex Migration

Are white streaks running from your grout joints? You may have efflorescence or latex migration.

UltraCare Heavy-Duty Stone, Tile & Grout Cleaner

UltraCare Abrasive Surface Cleaner

UltraCare Penetrating Plus Stone, Tile & Grout Sealer

+ 3

Show products

Featured Products

UltraCare Heavy-Duty Stone, Tile & Grout Cleaner

UltraCare Heavy-Duty Stone, Tile & Grout Cleaner is a highly concentrated and high-alkaline cleaner and degreaser. This product is formulated to quickly remove most waxes, grease, oil, light soap scum, and stains from mildew and algae. It is quite effective at removing most factory-applied waxes and floor finishes, and is ideal for areas that have been neglected or subject to heavy use.

UltraCare Abrasive Surface Cleaner

Abrasive Surface Cleaner UltraCare Abrasive Surface Cleaner is a powerful, abrasive cleaner that is safe for use on a variety of ceramic, porcelain and natural-stone surfaces. This water-based, biodegradeable formula is nontoxic and nonflammable, containing no VOCs or acids. Cleaning does not require letting the product stand on the surface. UltraCare Abrasive Surface Cleaner penetrates deep into dense surface pores and easily removes ground-in dirt, grime, rust stains and mineral deposits. This product is formulated to remove most factory-applied waxes and floor finishes as well as light cementitious and epoxy grout residue. It is excellent for use on heavily textured and hard-to-clean surfaces. Plus, it can be used in combination with any UltraCare cleaner or problem-solver.

UltraCare Penetrating Plus Stone, Tile & Grout Sealer

UltraCare Penetrating Plus Stone, Tile & Grout Sealer is a premium, natural-look, water-based penetrating sealer that provides maximum protection against most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed ceramic tile, masonry and grout. The product can also be used as a pre-grouting sealer.

UltraCare Heavy-Duty Sealer & Coating Stripper

UltraCare Heavy-Duty Sealer & Coating Stripper is a professional-strength formulation that helps to remove tough coatings, lacquers, varnishes, sealers, paints and epoxy grout haze from surfaces. This product effectively dissolves heavy wax, and helps to remove deep-set stains and heavy grease buildup. UltraCare Heavy-Duty Sealer & Coating Stripper is water-based, pleasantly scented, nonflammable and easy to use.

UltraCare Sulfamic Acid Crystals

Sulfamic Acid Crystals UltraCare Sulfamic Acid Crystals is a granular powder that dissolves in water and produces a cleaner and problem-solver for nonporous, acid-resistant tile and natural stone. It removes cured cement grout haze, mortar residue, rust stains and mineral deposits such as efflorescence.

UltraCare Penetrating SB Stone, Tile & Grout Sealer

UltraCare Penetrating SB Stone, Tile & Grout Sealer is a natural-look, solvent-based penetrating sealer that provides maximum protection against most common stains. It is safe for use on all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed porcelain and ceramic tiles, masonry, quarry tiles and cement grout. The product can also be used as a pre-grouting sealer.

Add to APP, Webinars

MAPEI Webinar: MAP060: Selling Sustainability

LEED, Well Building, Living Building Challenge. These terms appear more frequently on project specifications…

Add to APP, Webinars

MAPEI Webinar – MAPEI UTT Waterproofing & Injection Grout Solutions for Tunneling and Underground

MAPEI’s Underground Technology Team offers specialized waterproofing and injection grout solutions customized…

Webinars

MAPEI Webinar – Installing LVT Systems in Wet Environments

MAPEI’s Shower System for LVT allows for more creative decor and increases the speed of shower installations.…

Planislope RS

MAPEI Flexcolor CQ

Kerapoxy CQ

+ 2

Show products

Featured Products

Planislope RS

MAPEI Flexcolor CQ

Kerapoxy CQ

Mapeband

Mapelastic AquaDefense

Add to APP, Webinars

MAPEI NWFA Webinar – The Shortest Distance Between Two Points – NWFA Sam Biondo, 2020

Not all wood floors are the same, and your surface-prep techniques should not be either. Sam Biondo explains…

Add to APP, Webinars

Webinar: Poor Substrate Conditions, Environmental Conditions, Best Practices

Learn about achieving floor flatness and fixing substrate problems with MAPEI’s solutions, which include mud…

Add to APP, Webinars

MAPEI Webinar – MAP055: Gauged Porcelain Tile Systems

Do you know how to correctly install gauged porcelain tiles? Learn the proper tools, techniques and…

Add to APP, Webinars

MAPEI Webinar – MAPEI Tools for Estimating and Project Management

Learn how to win bids, manage projects and face technical challenges. This comprehensive Webinar explains how…

Add to APP, Webinars

MAPEI’s NWFA Webinar: Start at the Bottom – Moisture Control and Surface Preparation

Get the facts on installing wood flooring as Sam Biondo explains the need for moisture control and surface…

Add to APP, Webinars

MAPEI Webinar – Concrete Deterioration and Impact on Coatings Performance and Design

In this session, we discuss the types and causes of concrete deterioration, as well as an understanding of…

Add to APP, Webinars

NWFA – Wood and Water: Subfloor Moisture Control and Surface Prep for Wood Flooring Installation

Sam Biondo explains the need for subfloor moisture control for wood flooring and provides easy techniques to…

Add to APP, Webinars

MAPEI Webinar – New Solutions for Wood-Flooring Installation – NWFA Expo 2020

MAPEI’s Sam Biondo and Jeff Johnson discuss MAPEI’s new solutions for resilient/wood-flooring installations.

Planiseal PMB

Mapecem Quickpatch

Ultraplan Extreme 2

+ 1

Show products

Featured Products

Planiseal PMB

One-Component, Polyurethane Moisture Barrier and Bonding Agent Planiseal PMB is a one-component, moisture-curing, polyurethane compound designed to provide moisture vapor emission protection on damp concrete substrates in a single- or double-coat application method as well as a vapor retarder using a single-coat method over wood substrates. It also serves as a bonding agent and moisture barrier system for self-leveling underlayments when applied in a double-coat method with dry sand.

Mapecem Quickpatch

Ultraplan Extreme 2

Ultrabond ECO 907

Add to APP, Webinars

MAPEI Webinar – MAP054 Exterior Tile Installations

MAPEI’s Mike Granatowski discusses industry standards and guidelines regarding exterior tile installations.

Add to APP, Webinars

MAPEI Webinar – Understanding Sustainability

This course covers sustainable product certifications, green building standards and certification systems,…

Add to APP, Webinars

MAPEI Webinar - Understanding Industry Standards: TCNA Handbook

Jim Whitfield discusses the TCNA Handbook, industry standards, application methods and more.

Add to APP, Webinars

Proper Substrate Preparation for Hardwood, Laminate and Bamboo

Add to APP, Webinars

Sound Reduction Membranes Sorting the Myth and Mystery Out of Sound Reduction Numbers

Add to APP, Webinars

Understanding Thin Tile Installations

Ultraflex LFT Rapid

Ultraflex LFT

Keraflex Super

Show products

Featured Products

Ultraflex LFT Rapid

Polymer-enriched for high performance and deformability Nonsag formula for large-format and heavy tile and stone in wall applications Nonslump for large-format and heavy tile and stone in floor applications For thicker bond coats from 3/32" to 1/2" (2.5 to 12 mm) Smooth and creamy consistency makes it easy to apply Allows grouting in 3 to 4 hours

Kerapoxy IEG CQ

Ultracolor Plus Max

+ 4

Show products

Video Library

Topics

Webinars

Keep in touch