Video Library

Mapeguard ® UM 35 [NA] is an uncoupling, crack-isolation, waterproofing and vapor-management membrane made from high-density polyethylene (HDPE) with a rough surface and polypropylene fabric backing. Mapeguard UM 35 [NA] is designed for installing ceramic and stone tile, including over existing non- cushioned resilient flooring, ceramic tile and stone tile. It is designed to perform over challenging substrates, such as young concrete and single-layer 3/4" (19 mm) plywood subfloors with joist spacing of up to 19.2" (49 cm) on center.

Pre-Formed Outside Corners Mapeguard POC is a thin, flexible, alkali-resistant, polyethylene membrane coated on both sides with a nonwoven polypropylene fabric. It offers a fast and easy way to seal outside corners, curbs or return walls in wet areas where walls/curbs and floors meet, providing waterproofing and vapor management protection when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Pre-Formed Inside Corners Mapeguard PIC is a thin, flexible, alkali-resistant, polyethylene membrane coated on both sides with a nonwoven polypropylene fabric. It offers a fast and easy way to seal inside corners in wet areas where walls and floors meet, providing waterproofing and vapor management protection when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Mapeguard WP ST is a fast and easy way to cover seams and wall upturns to provide waterproofing and vapor management protection when installing Mapeguard WP 200 waterproofing sheet membrane for ceramic tile and stone.

Professional, Extra Smooth, Large-and-Heavy-Tile Mortar with Polymer Keraflex Plus is a highly versatile, nonsag/nonslump, large-and-heavy-tile mortar and thin-set mortar for tile and stone installations on floors, walls and countertops. This polymer-modified mortar is formulated with Easy Glide Technology for ease of application and offers excellent adhesion to substrates and tile. It can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Single-Component, 100%-Solids, Cold-Fluid-Applied, Structural Waterproofing Membrane Planiseal CR1 is a fast-curing, 100%-solids, cold-fluid-applied, single-component, moisture-curing, structural waterproofing membrane that will not shrink and is VOC-compliant in virtually all municipalities. Very low in odor, it is well suited for use in and around occupied spaces. Thanks to advanced proprietary technology, this single-grade membrane can be used in horizontal as well as vertical applications, maximizing versatility. Planiseal CR1 can be applied by roller, brush, trowel or squeegee. Planiseal CR1 is Miami-Dade NOA approved for: Exterior Waterproofing under Porcelain Tiles (System Type F) Planters (System Type F2) Concrete Split Slab Assemblies (System Type F3) The Miami-Dade Notice of Acceptance (NOA) designates that the approved product meets Florida Building Code (FBC) High Velocity Hurricane Zone (HVHZ) requirements. Many coastal municipalities accept or require this NOA in their local building code. Always confirm the most current requirements per the local code.

Quick-Setting, Fiber-Reinforced, Cementitious Rendering Mortar Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching and leveling mortar for interior and exterior walls, floors and submerged areas. It can be applied from 1/8" to 1-1/4" (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces. Eliminating the need for a latex additive, Planitop 330 Fast requires only mixing with water to produce a non-sagging mortar that is ready for tile installation in as little as 90 minutes.

Ultrabond ECO ® GPT is a single-component, nonsag, easy-to-trowel, hybrid-polymer-based adhesive technology specially designed for the installation of gauged porcelain tile and gauged porcelain tile panels/slabs on interior/exterior vertical surfaces and countertops. Unique technology advancements are incorporated in the formulation of Ultrabond ECO GPT for delivering instant grab, while allowing for the needed adjustability of panels and large-format tile. Superior bonding performance is complemented with flexibility, deformability and quick-curing characteristics to meet the demands of installing gauged porcelain tile, panels and slabs with application-friendly properties.

Mapelastic ® Turbo [NA] is a two-component, rapid-drying, cementitious-binder-based membrane with finegrained selected aggregates, special admixtures and synthetic polymers in water dispersion for interior and exterior installations under ceramic tile or stone in residential, commercial and industrial intermittent wet or submerged environments. Applied easily with a roller or brush, Mapelastic Turbo [NA] provides an excellent barrier to protect adjacent rooms and floors below from water damage. Mapelastic Turbo [NA] exceeds ANSI A118.10-LV and ANSI A118.12 standards and is compatible with polymer-modified cement-based mortars (ANSI A118.4 or better) or epoxy mortars (ANSI A118.3).

Primer L ™ is a concentrated, solvent-free acrylic primer used before the installation of underlayment materials. It is green for easy identification. Primer L improves the bond between a properly prepared and profiled concrete substrate, and a self-leveling underlayment. Primer L can also be used as a primer for gypsum-based underlayments and patches.

Waterproofing Sheet Membrane for Ceramic Tile and Stone Mapeguard WP 200 is a thin, flexible polyethylene sheet membrane with a nonwoven, polypropylene fabric on both sides, used for both waterproofing and crack isolation in interior/exterior residential and commercial applications. The laminated fabric webbing is designed to anchor the membrane to the substrate and tiles to the membrane using the bonded thin-set method with recommended, polymer-modified mortars. Mapeguard WP 200 ’s low perm rating performance is ideal for vapor protection in showers, wet areas and steam rooms.

Primer T ™ is a low-VOC, magenta-colored, water-based acrylic primer that enhances the performance and adhesion of self-leveling underlayments (SLUs) on nonporous and porous substrates. Suitable for a wide variety of substrates, Primer T combines excellent versatility with easy, low-odor application.

Mapesil ® T Plus is a professional-grade, 100%-silicone sealant with enhanced adhesion for use on multiple substrates. This product is specifically formulated for heavy traffic and expansion/movement joints exceeding both ASTM and ANSI standards.

Adesilex ™ P10 Mosaic & Glass Tile is a premium-grade, bright white, multipurpose thin-set mortar formulated with nonsag properties. Adesilex P10 Mosaic & Glass Tile is designed for glass tile, glass mosaic and marble mosaic, and is ideal for light translucent natural stone.

Professional, Extra Smooth, Large-and-Heavy-Tile Mortar with Polymer Keraflex Plus is a highly versatile, nonsag/nonslump, large-and-heavy-tile mortar and thin-set mortar for tile and stone installations on floors, walls and countertops. This polymer-modified mortar is formulated with Easy Glide Technology for ease of application and offers excellent adhesion to substrates and tile. It can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Premium, Unsanded Siliconized Acrylic Caulk Keracaulk U is a premium-grade, unsanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Premium, Sanded Siliconized Acrylic Caulk Keracaulk S is a premium-grade, sanded, easy-to-use, easy-to-clean siliconized acrylic caulk formulated to match all of MAPEI’s grout colors.

Mapesil ® T Plus is a professional-grade, 100%-silicone sealant with enhanced adhesion for use on multiple substrates. This product is specifically formulated for heavy traffic and expansion/movement joints exceeding both ASTM and ANSI standards.

Tile Lippage-Control, Edge-Leveling System for Floors and Walls MapeLevel EasyWDG System provides greater quality and consistency in tile finishes by reducing the effects caused by slight variations in substrates and tiles. Unlike most of the lippage-control systems currently available on the market, MapeLevel EasyWDG System has been designed to be applied entirely by hand. The ergonomic shape of the MapeLevel EasyWDG wedge allows it to be inserted smoothly and quickly into the MapeLevel EasyWDG Spacer M clips. MapeLevel EasyWDG Pliers are available where the use of a tool is preferred. Quick and easy to apply, the wedge and clips can prevent tile lippage and promote a flat tile surface.

UltraCare Penetrating SB Stone, Tile & Grout Sealer is a natural-look, solvent-based penetrating sealer that provides maximum protection against most common stains. It is safe for use on all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed porcelain and ceramic tiles, masonry, quarry tiles and cement grout. The product can also be used as a pre-grouting sealer.

Universal Grout Colorant and Sealer UltraCare Grout Refresh is a nonflammable, ready-to-use, water-based, polymer-modified colorant and sealer for grout joints. It can be applied onto and bonds to cement, epoxy, urethane and acrylic grouts.

UltraCare Heavy-Duty Stone, Tile & Grout Cleaner is a highly concentrated and high-alkaline cleaner and degreaser. This product is formulated to quickly remove most waxes, grease, oil, light soap scum, and stains from mildew and algae. It is quite effective at removing most factory-applied waxes and floor finishes, and is ideal for areas that have been neglected or subject to heavy use.

UltraCare Penetrating Plus Stone, Tile & Grout Sealer is a premium, natural-look, water-based penetrating sealer that provides maximum protection against most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed ceramic tile, masonry and grout. The product can also be used as a pre-grouting sealer.

Rapid-Setting, Polymer-Modified Sloping Mortar Planislope RS is a rapid-setting, pre-blended, cement-based, polymer-modified mortar that includes a blend of selected aggregates for use in sloping and thick- bed mortar installations. It only needs mixing with water to produce a mortar of exceptional strength. Used for preparing a substrate before the installation of tile and stone, Planislope RS is designed for pre-sloping under waterproofing membranes and mortar beds in showers when quick turnarounds are desired.

Quick-Setting, Fiber-Reinforced, Cementitious Rendering Mortar Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching and leveling mortar for interior and exterior walls, floors and submerged areas. It can be applied from 1/8" to 1-1/4" (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces. Eliminating the need for a latex additive, Planitop 330 Fast requires only mixing with water to produce a non-sagging mortar that is ready for tile installation in as little as 90 minutes.

Ultrabond ECO ® 399 is a high-moisture-resistant, heavy-rolling-load-resistant, aggressive, pressure-sensitive adhesive with enhanced dimensional control properties designed to install a wide variety of resilient flooring types. Ultrabond ECO 399 can also be used for flash-coving installations using traditional installation methods.

MAPEI Flexcolor ® Design is a professional-grade, ready-to-use (RTU) specialty grout that allows you to “design your color,” any color. MAPEI Flexcolor Design is formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor Design is formulated with the latest innovation in recycled glass-bead aggregate that enhances cleanability and improves workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. This product is exclusively for National Brand Accounts and Commercial Projects. For complete information on samples and ordering, contact your local MAPEI architectural representative.

MAPEI Flexcolor ® CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verifi ed that MAPEI Flexcolor CQ is 30% more cost-ef fi cient (based on typical rates of installers) and requires 65% less time to install.

Premium Unsanded Grout with Polymer Keracolor U Unsanded Grout is a premium-grade, preblended, polymer-modified unsanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/16" to 1/8" (1.5 to 3 mm).

Premium Sanded Grout with Polymer Keracolor S Sanded Grout is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

100%-Solids, Industrial-Grade, Epoxy Grout with Color-Coated Quartz Kerapoxy IEG CQ is a water-cleanable, 100%-solids, epoxy grout with high chemical and stain resistance. It is a nonshrinking, nonsagging, fast-curing, efflorescence-free grout. Color-coated quartz dramatically improves its cleanability, so that Kerapoxy IEG CQ leaves very little film residue during cleanup of excess grout with a grout float. The color-coated quartz also eliminates pigment bleed, so tiles are not stained during installation. This grout is perfectly suited for use in commercial kitchens, meat packing houses, and any commercial and institutional floors that require daily cleaning with enzymatic cleaners. Kerapoxy IEG CQ is ideal for applications where high-strength, mold- and mildew-resistant grout joints are required. In addition, it has high temperature resistance and can be steam-cleaned.

Premium, Epoxy Grout and Mortar with Color-Coated Quartz Kerapoxy CQ is a two-component, 100%-solids, epoxy grout and mortar that is nonsagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock technology to help protect against mold and mildew. Kerapoxy CQ does not contribute to efflorescence and has excellent resistance to chemicals, staining, alkalinity, chlorine, cracking and color deterioration.

Premium, Epoxy Grout and Mortar Kerapoxy is a premium-grade, water-cleanable, 100%-solids, high-strength, chemical-resistant, nonsagging, epoxy grout and mortar that offers excellent stain and chemical resistance. This versatile product is ideal for a wide range of projects, from countertops to shopping malls to airport terminals.

High-Performance, Rapid-Setting Grout with Maximized Color Depth and Color Consistency Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

MAPEI Flexcolor ® 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#5201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

MAPEI Flexcolor ® 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#5201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

Deep-Pour, Self-Leveling Compound Novoplan DPL is a self-leveling, calcium-aluminate-based underlayment and repair mix for interior concrete and engineer-approved floors and is capable of being placed up to 4" (10 cm) in a single lift.

High-Flow, Self-Leveling Compound Novoplan HFL is a self-leveling, calcium-aluminate-based underlayment and repair mix for interior concrete and engineer-approved floors with high-flow characteristics.

One-Component, Polyurethane Moisture Barrier and Bonding Agent Planiseal PMB is a one-component, moisture-curing, polyurethane compound designed to provide moisture vapor emission protection on damp concrete substrates in a single- or double-coat application method as well as a vapor retarder using a single-coat method over wood substrates. It also serves as a bonding agent and moisture barrier system for self-leveling underlayments when applied in a double-coat method with dry sand.

Ultrabond ECO ® 977 is a fast-setting, 100%-solids, one-component, moisture-cured urethane adhesive specifically designed for the installation of domestic solid and engineered wood flooring. Ultrabond ECO 977 can also be used in elevated subfloor moisture conditions of up to 12 lbs. (5.44 kg) MVER and 95% relative humidity when a specific installation method and trowel notch configurations are used.

Ultrabond ECO ® 907 is a fast-curing, 100%-solids, moisture-curing, gun-grade adhesive designed for basic wood subfloor construction practices as well as repairing of wood flooring; bonding of wood stair nosings; installation of wood molding and baseboards; and attachment of tackstrips to concrete subfloors. Ultrabond ECO 907 is also ideal for supplemental bonding of wide plank boards when nailing and gluing are required.

MAPEI Flexcolor ® 3D is a professional-grade, ready-to-use (RTU) translucent specialty grout with an “iridescent effect” finish. It is offered in 10 designer colors with translucent characteristics that not only reflect but also refract light. This allows the grout to transition in color to complement the tile color. The “translucent effect” is most noticeable with the color Crystal Moon (#5201), while the other nine colors exhibit a more pronounced “iridescent effect.” MAPEI Flexcolor 3D is also formulated for commercial and residential interior installations of porcelain, ceramic, glass and natural-stone tiles. Plus, the dense surface structure of the grout helps to prevent water-based stains on the grout surface. MAPEI Flexcolor 3D is formulated with the latest innovation in recycled glass-bead aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation. Comparison testing of MAPEI Flexcolor 3D versus traditional Portland-cement grout has verified that MAPEI Flexcolor 3D requires 65% less time to install than powder grouts.

High-Performance, Rapid-Setting Grout with Maximized Color Depth and Color Consistency Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

Ultracolor ® Plus FA – with DropEffect ™ technology and CO 2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT ™ ) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

Pre-Wired, Floor-Heating Fabric Mapeheat Mat is a pre-wired floor-heating fabric designed for easy installation. The pre-wiring aspect of Mapeheat Mat guarantees even heat distribution because the heating wires embedded within the fabric are evenly spaced during production. A single standard-size mat can provide adequate floor-heat coverage for most standard bathroom and living areas. Installers can also combine multiple standard mats to heat the desired area. When full coverage cannot be achieved with standard-size mats (such as areas with curves, angles or obstructions), Mapeheat Mat can be customized to provide optimal coverage.

Mapeheat Cable is a free-form, twisted-pair, floor-heating cable for use in any residential interior room where the comfort of radiant floor heating is desired. The cable can be spaced on site to provide 10, 12 or 15 W per sq. ft. based on the desired wattage output requirements of the installation. Mapeheat Cable is available in 33 lengths to accommodate areas as small as 6 sq. ft. (0.56 m 2 ) and up to 293 sq. ft. (27.2 m 2 ).

Ultracoat ® Premium Base is a two-component, high-performance, water-based sanding sealer for all types of wood flooring – including exotic species – and is specifically designed to work with Ultracoat water-based finishes in high-traffic areas. Ultracoat Premium Base seals freshly sanded wood flooring and creates a base layer that isolates the finish coat from penetrating into the open wood surface. Ultracoat Premium Base is formulated to enable a single-coat application for most wood types.

Two-Component, Deep-Tone Sanding Sealer Ultracoat Toning Base is a two-component, deep-tone, water-based sanding sealer for all types of wood flooring – including exotic species – and is designed to enhance the natural color of wood without causing it to darken or redden. Ultracoat Toning Base provides a deep look similar to what solvent-based sealers offer and is specifically designed to work with Ultracoat water-based finishes. Ultracoat Toning Base seals freshly sanded wood flooring and creates a base layer that isolates the finish coat from penetrating into the open wood surface.

Two-Component, Water-Based, Polyurethane Wood-Flooring Finish Ultracoat HT 2K is a two-component, water-based wood-flooring finish that is available in the gloss levels of natural, matte, satin and semi-gloss. Suitable for use in interior residential and heavy commercial applications where extreme traffic is expected, Ultracoat HT 2K is an aliphatic polyurethane resin system with excellent abrasion resistance for solid, pre-sanded wood floors. Ultracoat HT 2K adds a warm color to the wood and is non-yellowing.

Sawdust Admixture for Crack Filling of Wood Flooring Ultracoat Aqua Plus is a single-component binder that is mixed with sawdust produced during the final sanding process of preparing wood floors, and used to fill voids and cracks before the final application of water-based wood-floor finishing systems. Ultracoat Aqua Plus has extremely high wetting properties, is low in viscosity and forms a high-solids paste with excellent adhesion and workability. After application, the mixture dries quickly and can be sanded easily. The remaining mixture can be stored in a sealed plastic container.

One-Component, Water-Based Polyurethane Wood-Flooring Finish Ultracoat Easy Plus is a one-component, water-based wood-flooring finish that is available in the gloss levels of matte, satin and semi-gloss. Suitable for use in interior residential and light commercial applications, Ultracoat Easy Plus is a self-crosslinking, aliphatic polyurethane resin system with excellent abrasion resistance for solid, pre-sanded wood floors. Ultracoat Easy Plus adds a warm color to the wood and is non-yellowing.

Ultracoat ® Universal Base is a one-component, rapid-drying, water-based sanding sealer for solid, engineered and exotic wood flooring. Specifically designed to work with Ultracoat water-based finishes, Ultracoat Universal Base seals freshly sanded wood flooring and creates a base layer that isolates the finish coat from penetrating into the open wood surface.

Professional, Extra Smooth, Large-and-Heavy-Tile Mortar with Polymer Keraflex Plus is a highly versatile, nonsag/nonslump, large-and-heavy-tile mortar and thin-set mortar for tile and stone installations on floors, walls and countertops. This polymer-modified mortar is formulated with Easy Glide Technology for ease of application and offers excellent adhesion to substrates and tile. It can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Professional, Rapid-Setting, Extra Smooth, Large-and-Heavy-Tile Mortar with Polymer Keraflex RS is a fast-setting, highly versatile, large-and-heavy-tile mortar and thin-set mortar for tile and stone installation on floors, walls and countertops. It is formulated as nonsag for walls and nonslump for floors, allowing tiles to be grouted in as little as 3 to 4 hours after installation. Keraflex RS is a polymer-modified, smooth and creamy mortar formulated with Easy Glide Technology for ease of application and offers excellent adhesion to substrates and tile. It can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Standard, Extra Smooth, Large-and-Heavy-Tile Mortar with Polymer Keraflex SG is a standard-grade, versatile, large-and-heavy-tile mortar and thin-set mortar for tile and stone installations on floors, walls and countertops. It is formulated as nonsag for walls and nonslump for floors. Keraflex SG is a polymer-modified mortar formulated with Easy Glide Technology for ease of application and offers good adhesion to substrates and tile. It can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Keraflex ® Super is a highly versatile, nonsag/nonslump, large-and-heavy-tile mortar and thin-set mortar for tile and stone for installations on floors, walls and countertops. This polymer-modified mortar has a high content of a unique dry polymer, resulting in excellent adhesion to the substrate and tile, with enhanced resistance to freeze/thaw environments. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions. It is formulated with Easy Glide Technology ™ for ease of application and with a consistency that allows adjustability when used with lippage control systems. Keraflex Super can also be used as a mortar over uncoupling, crack-isolation, sound-reduction and waterproofing membranes.

Ultrabond ECO ® GPT is a single-component, nonsag, easy-to-trowel, hybrid-polymer-based adhesive technology specially designed for the installation of gauged porcelain tile and gauged porcelain tile panels/slabs on interior/exterior vertical surfaces and countertops. Unique technology advancements are incorporated in the formulation of Ultrabond ECO GPT for delivering instant grab, while allowing for the needed adjustability of panels and large-format tile. Superior bonding performance is complemented with flexibility, deformability and quick-curing characteristics to meet the demands of installing gauged porcelain tile, panels and slabs with application-friendly properties.

Pre-Wired, Floor-Heating Fabric Mapeheat Mat is a pre-wired floor-heating fabric designed for easy installation. The pre-wiring aspect of Mapeheat Mat guarantees even heat distribution because the heating wires embedded within the fabric are evenly spaced during production. A single standard-size mat can provide adequate floor-heat coverage for most standard bathroom and living areas. Installers can also combine multiple standard mats to heat the desired area. When full coverage cannot be achieved with standard-size mats (such as areas with curves, angles or obstructions), Mapeheat Mat can be customized to provide optimal coverage.

Mapeheat Cable is a free-form, twisted-pair, floor-heating cable for use in any residential interior room where the comfort of radiant floor heating is desired. The cable can be spaced on site to provide 10, 12 or 15 W per sq. ft. based on the desired wattage output requirements of the installation. Mapeheat Cable is available in 33 lengths to accommodate areas as small as 6 sq. ft. (0.56 m 2 ) and up to 293 sq. ft. (27.2 m 2 ).

High-Performance Concrete Resurfacer Concrete Renew is a one-component, polymer-modified, cementitious material for the resurfacing of existing concrete to provide a like-new look to concrete surfaces.

Universal Latex Additive Planicrete UA is a next-generation, water-based, one-component, concentrated liquid latex admixture used to enhance the performance of several MAPEI mortar products, including mortar mixes. Using Planicrete UA as part of the designated design mixes will increase product performance in the areas of bond, flexural and tensile strengths in addition to increased durability and enhanced workability.

Concrete Renew ™ Fine is a one-component, polymer-modified, cementitious material formulated with a finer aggregate than Concrete Renew to give a smoother finish when resurfacing existing concrete.

High-Performance, Quick-Setting, Self-Leveling Underlayment Ultraplan 1 Plus is a quick-setting, self-leveling, self-drying underlayment and repair mix for interior concrete and engineer-approved floors. Ultraplan 1 Plus has high strength and is abrasion-resistant, able to withstand light foot traffic after 2 to 3 hours and vehicular rubber-wheel traffic after 3 days.

High-Performance, Easy-Preparation, Self-Leveling Underlayment Ultraplan Easy is a quick-setting, self-leveling underlayment that requires only a clean, soundly bonded, properly prepared and primed substrate before application.

Easy-Preparation, Self-Leveling Underlayment Novoplan Easy Plus is a high-strength, self-leveling, calcium-aluminate-based underlayment and repair mix for interior concrete and engineer-approved floors. Its unique formulation allows for direct application on substrates that are clean, securely bonded and properly primed.

Professional, Self-Leveling Underlayment Novoplan 2 Plus is a high-strength, self-leveling, cement-based underlayment and repair mix for interior concrete and engineer-approved floors.

Premium, Sound-Reduction Rubber Membrane Mapesonic RM is a high-performance, acoustic underlayment designed to reduce ambient and impact sound transmissions in installations of ceramic and porcelain tile, natural stone, wood flooring, luxury vinyl tile (LVT), luxury vinyl plank (LVP), sheet vinyl and carpet tile. Mapesonic RM is ideal for applications in apartments, condominiums, college dormitories, classrooms and office buildings.

3-in-1 Membrane for Crack Isolation, Waterproofing and Sound Reduction Mapeguard 2 is a next-generation, flexible, thin, 40-mil (1-mm) lightweight, load-bearing, fabric-reinforced “peel-and-stick” crack-isolation, waterproofing and vapor-control membrane. Mapeguard 2 helps to prevent existing or future in-plane floor cracks (with movement up to 3/8" [10 mm] wide) from transmitting through grout, ceramic tile and natural stone. It also reduces the transmission of impact sound (footsteps, dropped objects, etc.) and airborne sound (voice, TV, etc.) through floors when installed under ceramic tile, stone or wood floor coverings.

All-in-One Membrane for Crack Isolation, Sound Reduction, Waterproofing and Vapor Management Mapesonic 2 is a patented, next-generation, flexible, 76-mil thin, lightweight, load-bearing, fabric-reinforced, “peel-and-stick” membrane for sound reduction, crack isolation, waterproofing and vapor management. Application of Mapesonic 2 can be immediately followed by installation of finished flooring. Mapesonic 2 reduces transmission of impact sound (such as footsteps and dropped objects) and airborne sound (such as voice and TV) through floors when installed under ceramic tile, stone, vinyl and wood floorings. It also helps to prevent existing or future in-plane floor cracks (with movement up to 3/8" or 10 mm wide) from transmitting through grout, ceramic tile and natural-stone assemblies.

Planiprep ® SC is a high-performance, polymer-modified, fiber-reinforced cement-based skimcoating and patching compound. Use Planiprep SC to skimcoat and smooth minor surface variations and defects on common substrates. Planiprep SC creates a strong, durable surface ready for almost any floor application. Its unique formulation mixes easily with water and produces an easy-to-apply patching compound. Rapid-setting Planiprep SC allows for fast-track flooring installations in 30 to 60 minutes after application, depending on thickness and environmental conditions.

Planitop ® XS is an extended-working-time variation of Planitop X . Shrinkage-compensated, fiber-reinforced, polymer-modified and containing a corrosion inhibitor, Planitop XS features Planitop X ’s outstanding workability and versatility. This product features a very low emission of volatile organic compounds and includes an offset of greenhouse gas emissions.

One-Component, Fast-Setting, Fiber-Reinforced, Vertical and Overhead Repair Mortar Planitop X is a one-component, fiber-reinforced, shrinkage-compensated, high-early-strength, fast-setting, polymer-modified, high-build cementitious repair mortar with a corrosion inhibitor.

Quick-Setting, Fiber-Reinforced, Cementitious Rendering Mortar Planitop 330 Fast is a quick-setting, polymer-modified, fiber-reinforced cementitious rendering, patching and leveling mortar for interior and exterior walls, floors and submerged areas. It can be applied from 1/8" to 1-1/4" (3 mm to 3.2 cm) in thickness to ramp, smooth and level surfaces. Eliminating the need for a latex additive, Planitop 330 Fast requires only mixing with water to produce a non-sagging mortar that is ready for tile installation in as little as 90 minutes.