Video Library

Mapeheat ™ Mat is a pre-wired floor-heating fabric designed for easy installation. The pre-wiring aspect of Mapeheat Mat guarantees even heat distribution because the heating wires embedded within the fabric are evenly spaced during production. A single standard-size mat can provide adequate floor-heat coverage for most standard bathroom and living areas. Installers can also combine multiple standard mats to heat the desired area. When full coverage cannot be achieved with standard-size mats (such as areas with curves, angles or obstructions), Mapeheat Mat can be customized to provide optimal coverage.

Mapeheat ™ Thermo Connect WiFi-enabled, floor-sensing thermostat has been designed specifically for today’s smart home. Homeowners can monitor, control and program their Mapeheat Thermo Connect floor-heating system via a free smartphone app (iOS and Android) or any Web browser. Homeowners can access a super-intuitive user interface using the 3.5" (9 cm) color touchscreen display. The thermostat also provides homeowners with useful information such as energy usage and weather forecasts. The Mapeheat Thermo Connect thermostat features 7-day programmability, dual-voltage compatibility (120 V and 240 V) and built-in GFCI protection (Class A). The exclusive design features a high-gloss frame and a borderless clear acrylic that blends into any modern room decor.

Mapeheat ™ Thermo Basic thermostat is a non-programmable control that offers simple on/off capability for the Mapeheat floor-heating system. The thermostat offers the most basic type of control and features energy usage information, dual-voltage compatibility (120 V and 240 V), a physical on/off switch and built-in Class A GFCI protection.

25-Amp Power Relay Switch Mapeheat Thermo Extender is a 25-amp power relay switch compatible with Mapeheat floor-heating thermostats. Available in either 120 V or 240 V, the device enables floor-heating loads in excess of 15 amps to be controlled by a single thermostat.

Mapeheat ™ Thermo Touch thermostat is a 7-day programmable, electric floor-heating thermostat that features a 3.5" (9 cm) color touchscreen display for accessing the super-intuitive user interface and energy use monitor. The thermostat features dual-voltage compatibility (120 V and 240 V), a physical on/off switch and built-in GFCI protection (Class A).

Keraflex ® Membrane Mortar is specifically designed for use as a mortar over and under uncoupling, crack-isolation, sound-reduction and waterproofing membranes. It is a faster-drying mortar when trapped between membranes and substrate or between membranes and tile.

Premium, Epoxy Grout and Mortar with Color-Coated Quartz Kerapoxy CQ is a two-component, 100%-solids, epoxy grout and mortar that is nonsagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock technology to help protect against mold and mildew. Kerapoxy CQ does not contribute to efflorescence and has excellent resistance to chemicals, staining, alkalinity, chlorine, cracking and color deterioration.

Pre-Formed Outside Corners Mapeguard POC is a thin, flexible, alkali-resistant, polyethylene membrane coated on both sides with a nonwoven polypropylene fabric. It offers a fast and easy way to seal outside corners, curbs or return walls in wet areas where walls/curbs and floors meet, providing waterproofing and vapor management protection when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Pre-Formed Inside Corners Mapeguard PIC is a thin, flexible, alkali-resistant, polyethylene membrane coated on both sides with a nonwoven polypropylene fabric. It offers a fast and easy way to seal inside corners in wet areas where walls and floors meet, providing waterproofing and vapor management protection when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Pre-Formed Valve Collars Mapeguard VC is a thin, flexible, alkali-resistant, polyethylene membrane coated on both sides with a nonwoven polypropylene fabric engineered with a stretchable rubber center. It provides a fast and easy way to seal around shower mixing valves in wet areas, providing waterproofing and vapor management protection when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Pre-Formed Pipe Collars Mapeguard PC is a thin, flexible, alkali-resistant, polyethylene membrane coated on both sides with a nonwoven polypropylene fabric engineered with a stretchable rubber center. It offers a fast, tight and easy way to seal around pipes and shower heads in wet areas, providing waterproofing and vapor management protection when combined with Mapeguard WP 200 waterproofing membrane for ceramic tile and stone.

Mapeguard WP ST is a fast and easy way to cover seams and wall upturns to provide waterproofing and vapor management protection when installing Mapeguard WP 200 waterproofing sheet membrane for ceramic tile and stone.

Waterproofing Sheet Membrane for Ceramic Tile and Stone Mapeguard WP 200 is a thin, flexible polyethylene sheet membrane with a nonwoven, polypropylene fabric on both sides, used for both waterproofing and crack isolation in interior/exterior residential and commercial applications. The laminated fabric webbing is designed to anchor the membrane to the substrate and tiles to the membrane using the bonded thin-set method with recommended, polymer-modified mortars. Mapeguard WP 200 ’s low perm rating performance is ideal for vapor protection in showers, wet areas and steam rooms.

UltraCare ® Grout Maximizer is a neutral-pH, fluoro-based, liquid polymer admixture for Keracolor ® S Sanded Grout and Keracolor U Unsanded Grout Portland-cement-based grouts, to be used in place of water. UltraCare Grout Maximizer optimizes resistance to water and oil-based stains, increases grout hardness and improves color consistency.

100%-Solids, Industrial-Grade, Epoxy Grout with Color-Coated Quartz Kerapoxy IEG CQ is a water-cleanable, 100%-solids, epoxy grout with high chemical and stain resistance. It is a nonshrinking, nonsagging, fast-curing, efflorescence-free grout. Color-coated quartz dramatically improves its cleanability, so that Kerapoxy IEG CQ leaves very little film residue during cleanup of excess grout with a grout float. The color-coated quartz also eliminates pigment bleed, so tiles are not stained during installation. This grout is perfectly suited for use in commercial kitchens, meat packing houses, and any commercial and institutional floors that require daily cleaning with enzymatic cleaners. Kerapoxy IEG CQ is ideal for applications where high-strength, mold- and mildew-resistant grout joints are required. In addition, it has high temperature resistance and can be steam-cleaned.

Premium, Epoxy Grout and Mortar Kerapoxy is a premium-grade, water-cleanable, 100%-solids, high-strength, chemical-resistant, nonsagging, epoxy grout and mortar that offers excellent stain and chemical resistance. This versatile product is ideal for a wide range of projects, from countertops to shopping malls to airport terminals.

High-Performance, Rapid-Setting Grout with Maximized Color Depth and Color Consistency Ultracolor Plus Max is an ultra premium, fast-setting, polymer-modified, nonshrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance.

Premium Sanded Grout with Polymer Keracolor S Sanded Grout is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

Premium Unsanded Grout with Polymer Keracolor U Unsanded Grout is a premium-grade, preblended, polymer-modified unsanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/16" to 1/8" (1.5 to 3 mm).

Ultracolor ® Plus FA – with DropEffect ™ technology and CO 2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT ™ ) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

Premium, Epoxy Grout and Mortar with Color-Coated Quartz Kerapoxy CQ is a two-component, 100%-solids, epoxy grout and mortar that is nonsagging/nonslumping in joints up to 3/8" (10 mm) in width, water-cleanable and easy to apply. Kerapoxy CQ uses a proprietary aggregate to achieve its durable color, making it excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock technology to help protect against mold and mildew. Kerapoxy CQ does not contribute to efflorescence and has excellent resistance to chemicals, staining, alkalinity, chlorine, cracking and color deterioration.

Premium Urethane Adhesive for Hardwood Flooring Ultrabond ECO 980 is a 100%-solids, one-component, moisture-cured urethane adhesive specifically designed for the installation of domestic and exotic solid and engineered wood flooring, including bamboo.

High-Performance, Easy-Preparation, Self-Leveling Underlayment Ultraplan Easy is a quick-setting, self-leveling underlayment that requires only a clean, soundly bonded, properly prepared and primed substrate before application.

Primer T ™ is a low-VOC, magenta-colored, water-based acrylic primer that enhances the performance and adhesion of self-leveling underlayments (SLUs) on nonporous and porous substrates. Suitable for a wide variety of substrates, Primer T combines excellent versatility with easy, low-odor application.