Video Tutorials & Information Materials | Mapei

All Video Tutorials Reset filters

All Video Tutorials

All Video Tutorials, Thermal insulation

Double external thermal insulation system | Mapetherm X2 System

All Video Tutorials, Thermal insulation

High impact resistance coat | Thermal insulation | Mapetherm

All Video Tutorials, Thermal insulation

Thermal break load fixation systems | Thermal insulation | Mapether

All Video Tutorials, Thermal insulation

Finishing plaster, thick coating | Thermal insulation | Mapetherm

All Video Tutorials, Thermal insulation

Reinforced shaving | Thermal insulation | Mapetherm

All Video Tutorials, Thermal insulation

Positioning of profiles and safety accessories | Thermal insulation | Mapetherm

All Video Tutorials, Thermal insulation

Mechanical anchors | Thermal insulation | Mapetherm

All Video Tutorials, Thermal insulation

Positioning of the starter profile and bonding of insulating panels| Thermal insulation | Mapetherm

All Video Tutorials, Thermal insulation

Preliminary checks and substrate preparation | Thermal Insulation | Mapetherm

All Video Tutorials, Sealing and bonding

Mapeflex MS55 | Vertical and over-head elastic sealing and bonding without supports

MAPEFLEX MS 55

Show products

Featured Products

MAPEFLEX MS 55

MAPEFLEX MS 55 bonds and seals most common building materials, on dry and wet . Strong initial setting, fast final hardening, elastic and paintable , MAPEFLEX MS 55 is available in cartridges for gun application and in a handy tube for manual application. Multifunctional product for elastically bonding and sealing in interior and exterior many construction details that need to stand the test of time. Solvent-free, odorless , very low VOC emission, also approved for drinking water , certified stain-resistant on absorbent materials. Available in white and dark grey 113.

All Video Tutorials, Sealing and bonding

Mapefix EP 100 | Making structural fixings with a chemical anchor

MAPEFIX EP 100

Show products

Featured Products

MAPEFIX EP 100

MAPEFIX EP 100 is a two-component pure epoxy resin . Certified for chemical anchors for threaded bar and rebar in rough or smooth (core drilled) holes in all types of building material. Also certified for supplementary reinforcing bars in reinforced concrete and for anchoring elements subjected to seismic loads (classes C1 and C2). Ideal for all types of structural strengthening work, construction joints, for use in aggressive environments, damp areas and areas below the water line and for static, dynamic or seismic loads.

All Video Tutorials, Sealing and bonding

Mapeflex FR | Sealing fire-break joints on walls

MAPEFLEX FR

Show products

Featured Products

MAPEFLEX FR

MAPEFLEX FR is an acrylic paintable sealant for fire-break joints in walls and passages in residential and industrial buildings and infrastructures.

All Video Tutorials, Sealing and bonding

MAPEFLEX Xpress 80/400 | Sealing joints and cracks in floors

MAPEFLEX XPRESS 80/400

Show products

Featured Products

MAPEFLEX XPRESS 80/400

MAPEFLEX XPRESS 80/400 is a deformable , high modulus , ultra-rapid-setting resin-based sealant for sealing horizontal joints and cracks in building materials with a limited amount of movement and subjected to intense mechanical stresses or loads from vehicles. MAPEFLEX XPRESS 80/400 is specifically designed for sealing horizontal joints and cracks in areas where normal operations can only be interrupted for a few hours in order to carry out the repair work.

All Video Tutorials, Sealing and bonding

Mapesil FR | Fire-break joints on walls and floors

MAPESIL FR

Show products

Featured Products

MAPESIL FR

MAPESIL FR is a flexible silicone sealant used to create fire-resistant seals in walls, ceilings, plant system trays, and passages in residential and industrial buildings and infrastructures. In adverse weather conditions, MAPESIL FR behaves like a normal sealant to guarantee joints have a leak-proof seal to prevent water, air, and dust from entering at temperatures from -40 to +180°C. In the event of fire, the particular formulation used to make MAPESIL FR forms a barrier to flames , smoke, and heat passing through the sealed gap, thereby preventing fire from propagating into adjacent rooms and environments.

All Video Tutorials, Restoration

Planipatch Xtra - Tutorial

Drying thixotropic cementitious patching compound for the local repairing

PLANIPATCH XTRA

Show products

Featured Products

PLANIPATCH XTRA

PLANIPATCH XTRA is a fine-grained , ultra-fast drying thixotropic patching compound designed for localised repairs and skim coating , even down to a feather-edge, on interior floors, walls, steps, and corners, where rapid hardening, quick drying, and a particularly smooth finish are required.

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Stain Remover - Tutorial

Mapei stain remover product for stains and organic residues

ULTRACARE STAIN REMOVER

Show products

Featured Products

ULTRACARE STAIN REMOVER

ULTRACARE STAIN REMOVER is a professional, thick consistency cleaner in aqueous solution, for organic stains removal . The product is characterised by high degreasing properties obtained through the action of absorbent thickeners . The stain is emulsioned and absorbed by the thickeners, and then is completely removed . The product’s efficiency varies according to the type of dirt, its grade of penetration and the surface to be treated.

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Rust Remover - Tutorial

The rust - clening Mapei product

ULTRACARE RUST REMOVER

Show products

Featured Products

ULTRACARE RUST REMOVER

ULTRACARE RUST REMOVER is a fast-acting , acid-free , thick consistency cleaner in aqueous solution, with slightly alkaline pH , for the removal of rust stains . Suitable for acid-sensitive surfaces. The gradual reaction of the product makes it possible to easily define the actual contact time needed for the removal of both surface and deep rust stains.

All Video Tutorials, Installation of ceramics

MapeLevel PROWDG - Tutorial

Self-leveling system for a quicker and easier tiles’ application with pliers

MAPELEVEL PROWDG SYSTEM

Show products

Featured Products

MAPELEVEL PROWDG SYSTEM

MAPELEVEL PROWDG SYSTEM is a wedge levelling system for achieving perfectly flat ceramic tile and stone material floors and walls at all times, even in the most difficult cases, such as the installation of large-format tiles or uneven coverings on deteriorated substrates. Installation with pliers is easy, precise and fast . MAPELEVEL PROWDG SYSTEM consists of MAPELEVEL PROWDG wedges , MAPELEVEL PROWDG SPACER C and MAPELEVEL PROWDG SPACER C-H spacers to be chosen according to the tile thickness, and MAPELEVEL PROWDG PUSHING-PLIERS. Mapei MAPELEVEL PROWDG SYSTEM levelling system makes tile installation easier and faster . This levelling system is suitable for tile thicknesses between 3 and 20 mm.

All Video Tutorials, Installation of ceramics

Mapelevel Easy T - Tutorial

Self-leveling system for tiles with adjustment tool included

MAPELEVEL EASY T

Show products

Featured Products

MAPELEVEL EASY T

MAPELEVEL EASY T is a reusable levelling system , particularly useful to make adjustments when installing tiles. MAPELEVEL EASY T used as the sole leveling system or in combination with the MAPELEVEL or MAPEI TILE SPACER, easily eliminates any imperfections , for a perfectly leveled floor and wall covering. The system consists of a MAPELEVEL EASY T levelling element with a special adjustment tool included with every pack. FIELDS OF APPLICATION: For floors and walls in ceramic and stone material. Useful for adjustment works of tiles during installation. For joints from 1.5 to 6 mm (if it is used as the only leveling element, MapeLevel Easy T is suitable exclusively for joints 1.5 mm wide. To create wider joints, use the element in combination to Mapei Tile Spacers). For tiles up to 17 mm thick PRODUCTS IN THE SYSTEM: Levelling element MapeLevel Easy T Adjustment tool

All Video Tutorials, Installation of ceramics

Mapei Tile Spacer 7-in-1 - Tutorial

7 spacers in one single element, reusable and multipurpose

MAPEI TILE SPACER 7-IN-1

Show products

Featured Products

MAPEI TILE SPACER 7-IN-1

MAPEI TILE SPACER 7-IN-1 is one single spacer with 7 different thicknesses to be used when installing ceramic and stone tiles on floors and walls. It is designed to help users position tiles and to form straight, uniform grout lines with just one single multi-purpose and multi-functional element, thereby helping to obtain perfectly even tiling. It may be used in combination with Mapei levelling systems from the MAPELEVEL line, to help install flat and even tiling, easily and accurately, on floors and walls. FIELDS OF APPLICATION: For ceramic and stone floor and wall tiles For grout lines 0,5 - 1 - 1,5 - 2 - 3 - 4 - 5 mm wide, with one single accessory

All Video Tutorials, Installation of ceramics

Ultracolor Plus – Tutorial

The grout that lasts over time

ULTRACOLOR PLUS

Show products

Featured Products

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high-performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any tiled surface and adds a touch of originality to any setting. Designed to last and to keep surfaces hygienic and healthy, ULTRACOLOR PLUS is easy to apply and clean. Mapei grout colours match with Mapesil AC sealant.

All Video Tutorials, Installation of ceramics

Kerapoxy Easy Design - Tutorial

Brilliant performance grouts, interior design colours

KERAPOXY EASY DESIGN

Show products

Featured Products

KERAPOXY EASY DESIGN

K KERAPOXY EASY DESIGN is a two-component epoxy grout that is certified as anti-bacterial (BioBlock® technology), HACCP-compliant and therefore ideal for environments that require maximum hygiene . Resistant to mould , it has excellent aesthetic qualities , is acid-resistant , and has excellent workability . It is suitable for grouts of up to 15 mm on ceramic tiles, glass mosaic and natural stone surfaces. Available in a wide range of colours coordinated with those of MAPESIL AC sealant, it can be mixed with MAPEGLITTER and MAPECOLOR METALLIC to achieve special decorative effects. In 3 kg and 1.5 kg packs , for small works

Cleaning - Mantaining - Protection, All Video Tutorials

UltraCare Rain Protector | Video tutorial

ULTRACARE RAIN PROTECTOR W

ULTRACARE RAIN PROTECTOR S

Show products

Featured Products

ULTRACARE RAIN PROTECTOR W

ULTRACARE RAIN PROTECTOR W is a consolidating and protective water-repellent treatment with high contact angle . Solvent-free it is suitable for temporary protection of exterior flooring in contact with rainwater and it can be applied also in case of cracks of up to 1 mm. ULTRACARE RAIN PROTECTOR W is ideal for porcelain tiles, cement, natural stone, klinker, Terracotta and the like. Available also in a solvent-based version: ULTRACARE RAIN PROTECTOR S

ULTRACARE RAIN PROTECTOR S

ULTRACARE RAIN PROTECTOR S is a solvent-based , protective and consolidating water-repellent treatment with v ery high contact angle , for temporary protection of flooring on terraces, balconies, horizontal surfaces exposed to the weather. It can be applied also in case of cracks of up to 1 mm. Silane and siloxane-based water-repellent product in solvent, is ideal for ceramic tiles, cement, natural stone, klinker, Terracotta and the like. Avaliable also in a water-based version: ULTRACARE RAIN PROTECTOR W.

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Smooth Silicone | Smoothing product for finishing sealant

ULTRACARE SMOOTH SILICONE

Show products

Featured Products

ULTRACARE SMOOTH SILICONE

ULTRACARE SMOOTH SILICONE is an innovative formulation which is suitable for all types of sealants (acetic, neutral, polyurethane etc.). It facilitates the finishing of the sealant after its application and contributes in creating smooth, compact surfaces without hollows that could ease dirt pick up and lead to future formation of moulds. When combined with specific sealants (such as Mapesil AC or Mapesil LM ), the product enhances their mould resistance properties by granting a surface with no porosities. It does not leave residues and can be applied on most of the surfaces commonly used in the building industry (ceramic tiles, stone, glass mosaic etc.).

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Mould Remover | High penetration cleaner for mould remover

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Grout Cleaner | Concentrated Cleaner for grout joints

ULTRACARE GROUT PROTECTOR

Show products

Featured Products

ULTRACARE GROUT PROTECTOR

When applied on the grouted surface, ULTRACARE GROUT PROTECTOR gives a durable and periodically renewable (according to use and exposure) stain-resistant protection , both to the polished porcelain tiles and the cementitious grouts. Treated surfaces are also suitable for contact with foodstuffs .

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Anti-Mould Protector | Mould resistant protector

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Fuga Fresca Grout Refresh

ULTRACARE FUGA FRESCA

Show products

Featured Products

ULTRACARE FUGA FRESCA

ULTRACARE FUGA FRESCA quickly and easily applied is used to refresh and modify the colour of cementitious grout joints in interior. It can be used to eliminate irregularities in the colour of grout-joints and, thanks to its special characteristics and excellent covering qualities, allows joints with a uniform colou r to be produced with lower water absorption that are easy to clean.

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Grout Protector - Water dispersion for protecting grouts

ULTRACARE GROUT PROTECTOR

Show products

Featured Products

ULTRACARE GROUT PROTECTOR

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Grout Release - Pre-grouting protection

ULTRACARE GROUT RELEASE

Show products

Featured Products

ULTRACARE GROUT RELEASE

ULTRACARE GROUT RELEASE is a stain-resistant protector specific for thin polished ceramic tiles and porous materials . It is used as pre-grouting treatment (for cementitious grouts) to reduce the risk of staining and facilitate cleaning .

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare HD Cleaner - Concentrated alkaline cleaner

ULTRACARE HD CLEANER

Show products

Featured Products

ULTRACARE HD CLEANER

ULTRACARE HD CLEANER, is a high-performance professional concentrated detergent and alkaline degreaser for deep cleaning of surfaces. It is perfect for thoroughly cleaning ceramic or natural stone surfaces before tile-on-tile applications . ULTRACARE HD CLEANER removes organic dirt , water-based or metallic wax treatments, stains and grease on resistant substrates.

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Intensifier S - Solvent-based impregnator

ULTRACARE INTENSIFIER S

Show products

Featured Products

ULTRACARE INTENSIFIER S

ULTRACARE INTENSIFIER S is an innovative , solvent-based formulation used to preserve and enhance the colour of natural stone, terracotta, terrazzo, marble-chip tiles, cementine tiles and engineered stone both in interior and exterior. Its particular solvent-based formulation helps it absorb into the material, even those which are particularly compact or have a polished finish . Up to 50 m 2 surface with 1 litre of ULTRACARE INTENSIFIER S (one coat), according to the absorbency level and the surface finish of the substrate to be treated.

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Intensifier W - Protecting and enhancing impregnator

ULTRACARE INTENSIFIER W

Show products

Featured Products

ULTRACARE INTENSIFIER W

ULTRACARE INTENSIFIER W is a water-based polymeric microemulsion with high penetration capacity and protecting and enhancing effect. This product enhances the colour of natural stone with medium-high absorbency, terracotta, terrazzo, marble-chip tiles, cementine tiles and engineered stone giving the surface a bright finish . Suitable for application on walls and floors, both in interior and exterior.

Cleaning - Mantaining - Protection, All Video Tutorials

Ultracare Stain protector S - Solvent-based protector

ULTRACARE STAIN PROTECTOR S

Show products

Featured Products

ULTRACARE STAIN PROTECTOR S

ULTRACARE STAIN PROTECTOR S reduces the amount of water, oil and grease absorbed by the surfaces, making them easier to maintain and clean. The product can be used on floors and coatings , work surfaces, kitchen tops and bathrooms.

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Stain Protector W Plus - Water-based protector

ULTRACARE STAIN PROTECTOR W PLUS

Show products

Featured Products

ULTRACARE STAIN PROTECTOR W PLUS

ULTRACARE STAIN PROTECTOR W PLUS reduces the amount of water, oil and grease absorbed by the surfaces, making them easier to maintain and clean . The product is suitable for application on food contact surfaces and can be used on floors and coatings, work surfaces, kitchen tops and bathrooms. It does not create a film on the surface and does not affect the original colour and breathability of the material. The product has a good UV stability and is also suitable for use on polished stone surfaces.

All Video Tutorials, Restoration

Mape Antique NHL Eco Restaura

MAPE-ANTIQUE NHL ECO RESTAURA

Show products

Featured Products

MAPE-ANTIQUE NHL ECO RESTAURA

MAPE-ANTIQUE NHL ECO RESTAURA is a multipurpose , pure hydraulic lime-based, breathable skimming mortar , for finishing and restoring substrates, renders and coverings on all types of façades and masonry. It can be applied in coats 2 to 20 mm thick, including on old paintwork. Other than its standard colour, MAPE-ANTIQUE NHL ECO RESTAURA is also available in various colours that can be mixed and combined together.

Restoration, All Video Tutorials

Mape-Antique NHL ECO Risana - Single-product dehumidifying render

MAPE-ANTIQUE NHL ECO RISANA

Show products

Featured Products

MAPE-ANTIQUE NHL ECO RISANA

Single-product and single-layer cement-free dehumidifying render made from pure , natural hydraulic lime and recycled material , particularly recommended for ECO-compatible remedial work on existing masonry of all types of buildings with rising damp, including quality buildings.

Installation of ceramics, All Video Tutorials

Mapelevel Easy System

Screw levelling system for ceramic and stone floor and wall tiling.

MAPELEVEL EASY SYSTEM

Show products

Featured Products

MAPELEVEL EASY SYSTEM

MAPELEVEL EASY SYSTEM is a levelling system for ceramic tiles and stone material, for the installation of perfectly flat floor and wall coverings. Thanks to the special quick screwing system, MAPELEVEL EASY SYSTEM is easier to apply, considerably reducing installation time. Tile levelling is even more precise , ensuring a flawless result, even when installing large- format tiles. Versatile and complete, MAPELEVEL EASY SYSTEM fits a wide variety of tiles with thicknesses up to 21 mm and all installation patterns. The system is composed of: MAPELEVEL EASY CAP - MAPELEVEL EASY SPACER L spacers (available in 3 formats: linear, T-shaped, and X-shaped) - MAPELEVEL EASY SHIELD anti-scratch shield (optional accessory).

Installation of ceramics, All Video Tutorials

Mapelevel Pedestal by Mapei

Installation of ceramics, All Video Tutorials

Mapeguard Board waterproof panels

MAPEGUARD BOARD

Show products

Featured Products

MAPEGUARD BOARD

MAPEGUARD BOARD is a multi-purpose , waterproof and lightweight panel, to be used as a substrate for installing all types of ceramic coverings. The product is used internally, for levelling walls, even as an alternative to cementitious render, and for creating room partitions and furnishing elements, such as shelves, surrounds for sinks and sanitary ware, benches, niches and shower cabins. MAPEGUARD BOARD is made from an inner layer of highdensity extruded polystyrene, with a multi-layered and completely waterproof membrane to each side. MAPEGUARD BOARD is waterproof, lightweight, solid and easy to cut and has good insulating properties. The versatility of the panels, available in different thicknesses and easy to cut and assemble, allows to customize any environment, by creating unique, tailor-made projects. MAPEGUARD BOARD is to be used in combination with the related accessories , MAPEGUARD EC , MAPEGUARD IC , MAPEGUARD DH-U , MAPEGUARD PC , which ensure complete and continuous waterproofing of surfaces. The system is complemented by channels, point drains, and Profilpas profiles

Installation of ceramics, All Video Tutorials

Ultralite adhesives | Installation of large format ceramic tiles

ULTRALITE FLEX RANGE are the adhesives range that help your work. ULTRALITE LEX is a line of lightweight…

ULTRALITE S2 FLEX

ULTRALITE S2 FLEX QUICK

ULTRALITE S1 FLEX QUICK

+ 1

Show products

Featured Products

ULTRALITE S2 FLEX

ULTRALITE S2 FLEX is the one-component, lightweight, highly deformable cementitious adhesive that is easy to apply even at high temperatures . It is ideal for l aying large-format ceramic tiles on façades. Thanks to its special formulation developed in Mapei laboratories, ULTRALITE S2 FLEX guarantees extremely high yield and excellent wetting of the tile back , ensuring perfect adhesion for ceramic tiles, natural stone and mosaics both indoors and outdoors. No latex required; it is mixed with water only.

ULTRALITE S2 FLEX QUICK

The one-component, lightweight, highly deformable cementitious adhesive, ULTRALITE S2 FLEX QUICK is easy to apply by trowel even at high temperatures . Ideal for laying large formats on façades . With very high yield and excellent wetting of the tile back, it ensures perfect adhesion for tiles of any type and format, ceramic, natural stone and mosaic. ULTRALITE S2 FLEX QUICK can only be mixed with water and does not require the addition of latex. With fast setting and hydration , it is perfect for rapid restoration works , for immediate putting back into service . Thanks to its high workability, it is a lightweight cementitious adhesive that is perfect for applications in both cold and warm weather .

ULTRALITE S1 FLEX QUICK

ULTRALITE S1 FLEX QUICK is the one-component, lightweight, cementitious adhesive with high workability , ideal f or rapid restoration works , for immediate putting back into service . With fast setting and hydration , thanks to its high workability , it is a lightweight cementitious adhesive perfect for applications in both cold and warm weather .

ULTRALITE FLEX

One-component, high-performance , moderately deformable, lightweight, cementitious adhesive with no vertical slip and extended open time , ULTRALITE FLEX has an extremely high yield. It is easy to apply by trowel and has an excellent wetting of the back of the tile .

Restoration, All Video Tutorials

Mapeshield Corrosion Control | Corrosion protection for longer lasting concrete structures

MAPESHIELD CORROSION CONTROL

Show products

Featured Products

MAPESHIELD CORROSION CONTROL

MAPESHIELD CORROSION CONTROL is a 12 cm self-adhesive zinc plate that is fastened directly to the surface of concrete to provide cathodic protection for rebar and prevent corrosion , especially when the structure to be protected is located in particularly aggressive environments such as sea-facing buildings exposed to aggressive chlorides. MAPESHIELD CORROSION CONTROL is recommended when carrying out restoration work on residential buildings and to protect rebar at the front of balcony decks in particular. MAPESHIELD CORROSION CONTROL complies with the prescriptions of EN 12696 “Cathodic protection of steel in concrete”. MAPESHIELD CORROSION CONTROL may be used to protect both residential buildings that do not require restoration work and for those that need to be restored.

All Video Tutorials, Restoration

Mapei | Mapegrout Easy Repair | manual restoration of a concrete pillar

Restoration, All Video Tutorials

Mapei | Mapegrout Easy Repair | Restoration of a concrete wall with a mortar pump

Mapegrout Easy Repair is a normal-setting thixotropic mortar for repairing deteriorated concrete.

All Video Tutorials, Restoration

Manual restoration of a concrete pillar

Mapegrout 430 is a fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete.

Restoration, All Video Tutorials

Mapegrout 430 | Restoration of a concrete pillar with a mortar pump

Mapegrout 430 is a fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete.

All Video Tutorials

Mapei | Ultracoat Renew FL | Renew your wooden floor in 4 easy steps

ULTRACOAT RENEW FL

Show products

Featured Products

ULTRACOAT RENEW FL

The Ultracoat Line is a complete Mapei four-step system for refurbishing and hygienising parquet floors. ULTRACOAT RENEW FL primer for wood flooring is the best choice for refurbishment work; no sanding required and no need to remove the old finish , it also avoids creating dust and shortens the time required to complete work. It is used when applying two-component varnish on existing parquet treated with UV-resistant or oil-based finish (except oily wax finishes), or with solvent-based or water-based varnish. Along with Ultracoat Remover Plus detergent for removing old wax and dirt, Ultracoat Cleaner hygienising detergent and Ultracoat HT 2K two-component, water-based, aliphatic, 100% polyurethane lacquer , tested according to ISO 22196, it gives a new lease of life to the surface of wood flooring and preserves the natural beauty of parquet floors. Apart from restoring the surface of floors, ULTRACOAT HT 2K forms a barrier against the proliferation of bacteria .

Sealing and bonding, All Video Tutorials

Mapefix VE SF 300 | How to fasten metal bars in concrete

Mapefix VE SF 300 can be used to fasten metallic bars in concrete.

MAPEFIX VE SF

Show products

Featured Products

MAPEFIX VE SF

MAPEFIX VE SF is the Mapei solution for chemically anchoring every type of material . Ideal for anchoring in C1 seismic-risk areas , tension zones (cracked concrete), compression zones (concrete without cracks), second pours, rough holes (hammer-drilled), and in dry, damp or wet holes. Ultra-rapid hardening , also suitable for wet surfaces or application at temperatures down to -10°C . Multi-certified, exhibits high mechanical properties and resistance to chemicals .

Stone paving, All Video Tutorials

Mapestone Joint for phorphyry installation

Phorphyry setts stone paving refurbishing with a flexible and pervious system.

MAPESTONE JOINT

Show products

Featured Products

MAPESTONE JOINT

MAPESTONE JOINT is a one-component, solvent-free polyurethane binder with a characteristic odour, designed for sealing joints between blocks, setts, and cobblestones in flexible and pervious architectural stone road surfaces that require vibro-compaction. MAPESTONE JOINT is recommended by UNI 11714-1:2018 for use in classes P4, P5, P6, P7, and P8, and prescribed by the same standard for class P9. It allows the construction of sound-absorbing stone surfaces that can be opened to traffic just 48 hours after installation at +20 °C. With the Mapestone range , Mapei offers high-performance, durable solutions for architectural stone paving subject to traffic, including heavy loads. Designed to meet current standards, Mapestone products combine performance and aesthetics, making them ideal for historic towns and city centres, as well as all types of stone paving projects .

Waterproofing, All Video Tutorials

Mapeguard UM 35 on Interior

Interior application

MAPEGUARD UM 35

Show products

Featured Products

MAPEGUARD UM 35

Waterproofing, uncoupling and anti-fracture membrane for cracked and damp substrates and substrates that are not fully cured before installing ceramic and stone tiles for internal and external surfaces without having to copy the layout of distribution joints in the substrate.

Waterproofing, All Video Tutorials

Mapeguard UM 35 on exterior

Application on balconies and terraces

MAPEGUARD UM 35

DRAIN VERTICAL

ADESILEX PG4

Show products

Featured Products

MAPEGUARD UM 35

DRAIN VERTICAL

Kit for installing floor drains, ideal for draining off water from terraces, balconies, bathrooms, boiler rooms, wash-rooms, etc.

ADESILEX PG4

Two-component, thixotropic, epoxy adhesive with modified rheology for bonding Mapeband and Mapeband TPE, PVC braces, Hypalon and for structural bonding

Waterproofing, All Video Tutorials

Monolastic: Waterproofing

One-component, simple and flexible waterproofing

MONOLASTIC

Show products

Featured Products

MONOLASTIC

MONOLASTIC is a one-component elastic cementitious membrane used as a waterproofing treatment on balconies and terraces, as well as in bathrooms, showers and swimming pools, before installing floor or wall covering. MONOLASTIC is applied in thin layers and, thanks to its excellent adhesion to a wide range of substrates and its high breathability , it is highly versatile when used on new builds and in renovation work on existing structures.

Stone paving, All Video Tutorials

Mapestone System: Stone installation

Porphyry installation Mapestone System

MAPESTONE PFS 2 VISCO

MAPESTONE PFS PCC 2

MAPESTONE PFS 2

+ 1

Show products

Featured Products

MAPESTONE PFS 2 VISCO

MAPESTONE PFS2 VISCO is the pre-blended mortar recommended for grouting concrete slabs and blocks of concrete to create paving with better performance properties than traditional technology. The product is available in a neutral version for decorative paving made from light coloured stone elements and in a dark grey version , ideal for decorative paving made from darker coloured stone . It is used to install particularly thick and/or trapezoidal shaped paving elements on compact installation beds, recommended by UNI 11714-1:2018 for classes P4, P5, P6, P7 and P8 and prescribed by the same standard for class P9. Used to install highly durable paving in areas that may get saturated or that are exposed to freeze/thaw cycles where de-icing salts and seawater are present (exposure classes XF4 and XS3 according to EN 206). The Mapestone Line is the line of Mapei solutions created and developed for creating high performance, durable, decorative stone paving, including paving subjected to heavy traffic conditions, which is compliant with current standards and has aesthetic qualities which make it suitable for use in old town and city centres of historical and artistic interest and with all types of stone paving.

MAPESTONE PFS PCC 2

MAPESTONE PFS PCC2 is the mortar recommended for grouting stone paving made from stone cubes, smolleri bricks, cobblestones, slabs and blocks of stone, prefabricated elements and thick porcelain with low impact on the environment , including paving exposed to high temperature variations and stresses and loads from intense, heavy vehicle traffic . It is used to install paving elements with an even or irregular thickness on compact installation beds, recommended by UNI 11714-1:2018 for classes P4, P5, P6, P7 and P8 and prescribed by the same standard for class P9 . Used to install highly durable paving in areas that may get saturated or that are exposed to freeze/thaw cycles where de-icing salts and seawater are present (exposure classes XF4 and XS3 according to EN 206). The Mapestone Line is the line of Mapei solutions created and developed for creating high performance, durable, decorative stone paving, including paving subjected to heavy traffic conditions, which is compliant with current standards and has aesthetic qualities which make it suitable for use in old town and city centres of historical and artistic interest and with all types of stone paving.

MAPESTONE PFS 2

Ready-mixed mortar with excellent mechanical resistance, resistant to de-icing salts, freeze-thaw cycles and seawater, for grouting architectural stone pavings in exposure class XF4 and XS3. Available in NEUTRAL, DARK GREY e WHITE colours

MAPESTONE TFB 60

MAPESTONE TFB 60 is the mortar recommended for installing natural stone slabs, stone setts, small blocks, smolleri bricks, cobblestones, blocks, prefabricated elements, interlocking blocks and thick porcelain with low impact on the environment for paving in piazzas and carparks, on roads and pavements and at roundabouts. It is used to install paving elements with an even or irregular thickness and particularly thick and/or trapezoidal shaped elements on compact installation beds, recommended by UNI 11714-1:2018 for classes P4, P5, P6, P7 and P8 and prescribed by the same standard for class P9. It allows to install architectural stone paving with high durability even in environments subject to rain , to freeze-thaw cycles in the presence of de-icing salts and seawater (environmental conditions classified by EN 206 standard as XF4 and XS3 ).

Waterproofing, All Video Tutorials

Mapelastic Aquadefense: Showers waterproofing

Quick and ready-to-use waterproofing for bathrooms, shower cubicles and damp environments

MAPEBAND PE 120

Show products

Featured Products

MAPEBAND PE 120

Rubber tape for waterproofing systems made from liquid membranes.

Sports flooring, All Video Tutorials

Mapecoat TNS Extreme: Resin floors for urban design

For resin-coated areas open to vehicles, cycle lanes, pedestrian zones

MAPECOAT TNS EXTREME

Show products

Featured Products

MAPECOAT TNS EXTREME

MAPECOAT TNS EXTREME is a two-component , rapid-drying epoxy-acrylic resin in water dispersion with selected fillers specifically formulated in the Mapei Research & Development laboratories to create durable coatings on surfaces, including those with vehicle access. MAPECOAT TNS EXTREME may be used to create coloured coatings on paving open to vehicles that need to have a high level of skid-resistance , including in wet weather.

Installation of ceramics, All Video Tutorials

Keraquick Maxi S1: Ceramic installation

Rapid ceramic installation even when a thick layer of adhesive is required

KERAQUICK MAXI S1

Show products

Featured Products

KERAQUICK MAXI S1

KERAQUICK MAXI S1 is a high-performance , fast setting and hydrating and no vertical slip , deformable cementitious adhesive for ceramic tiles and particularly suitable for stone material, even for large formats, that may be applied at high thickness without tile drop , even when installing heavy and large formats . Easy to work with and quick to apply, it is ideal for applications in cold seasons and when rapid installation is required during renovation work, especially in high-traffic areas such as airports and shopping malls. KERAQUICK MAXI S1 is EC1 Plus certified with very low emissions of volatile organic compounds and contributes to earnig LEED credits and complies with CAM requirements.

Installation of ceramics, All Video Tutorials

Keraquick Maxi S1 Marble installation

Perfect installation of natural stone sensitive to moisture and streaks

KERAQUICK MAXI S1

Show products

Featured Products

KERAQUICK MAXI S1

Grouting, All Video Tutorials

Kerapoxy Design

Decorative, translucent, acid resistant mortar ideal for glass mosaic

Concrete surfaces, All Video Tutorials

Color Paving

Redipuglia War Memorial Rogliano di Redipuglia (GO) – Italy Mapei Color Paving® renovation of architectural…

MAPEWASH PO

COLOR PAVING BINDER

MAPESTONE PFS 2

+ 2

Show products

Featured Products

MAPEWASH PO

Biodegradable vegetable oil-based surface set retardant with a curing effect to create architectural floors and surfaces.

COLOR PAVING BINDER

Ready-mixed ready to use screed supplied in big-bags for creating architectural road surfaces in exposed aggregate concrete

MAPESTONE PFS 2

COLOR PAVING ADMIX

Ready-mixed multi-purpose powdered admixture used to create architectural road surfaces in exposed aggregate concrete

PLANICRETE

Synthetic rubber latex to improve adhesion and performances of cement mixes and prepare bonding slurries for screeds.

Sealing and bonding, All Video Tutorials

Mapesil AC and Ultrabond MS Rapid | How to install and seal a shower plate

Ultrabond MS Rapid can be used for installation of shower plate, Mapesil AC for sealing it together with wall…

ULTRABOND MS RAPID

MAPESIL AC

Show products

Featured Products

ULTRABOND MS RAPID

ULTRABOND MS RAPID is a deformable, high initial adhesion and fast curing assembly adhesive for assembling and constructing building and industrial elements without using mechanical fasteners. ULTRABOND MS RAPID is specifically designed to perform deformable bonding on almost all building materials , including damp materials . It reduces or eliminates the use of mechanical fasteners . Ideal for bonding, in interior and exterior , light and heavy construction elements.

MAPESIL AC

MAPESIL AC, solvent-free, pure acetic silicone sealant . Ideal for internal and external use on ceramic in damp settings and swimming pools. For strong seals that maintain their look over time.

Sealing and bonding, All Video Tutorials

Mapeflex AC-P | Invisible sealing of cracks and joints

Mapeflex AC-P for smooth finish compared with Mapeflex AC4 ideal for rough finish.

MAPEFLEX AC4

MAPEFLEX AC‑P

Show products

Featured Products

MAPEFLEX AC4

MAPEFLEX AC4 is a one-component acrylic resin-based sealant in water dispersion with a smooth finish . It adheres to all porous surfaces , such as concrete, wood, gypsum, plaster, brickwork, light-weight concrete, natural stone, and is ideal for sealing expansion and construction joints subject to medium movement and for surface sealing of cracks and slits, in interior and exterior. The creamy consistency allows it to be easily applied both horizontally and vertically and smoothed to obtain a final aesthetic effect .

MAPEFLEX AC‑P

Paintable acrylic sealant with a render-effect finish for movements up to 12.5%.

All Video Tutorials

Re-Con Zero - Returned Concrete with Zero Impact

RE-CON ZERO

Show products

Featured Products

RE-CON ZERO

Two-component powder product used to completely recover returned concrete from mixer trucks

Installation of ceramics, All Video Tutorials

Mapei Keraflex S1 Zero - Zero Impact

KERAFLEX MAXI S1 ZERO

Show products

Featured Products

KERAFLEX MAXI S1 ZERO

KERAFLEX MAXI S1 ZERO is a high-performance, deformable, grey and ultra-white cementitious adhesive with no vertical slip , extended open time , and Low Dust technology, designed for ceramic and natural stone tiles, excellent for the installation of large-format ceramic tiles . KERAFLEX MAXI S1 ZERO can be applied at high thicknesses and is ideal for the installation of tiles, including large and heavy ones, preventing tile sinking in the floors and slip on walls. Cementitious adhesive certified for use in the marine industry

Waterproofing, Sealing and bonding, All Video Tutorials, Restoration

Repair work on a road viaduct

This video illustrates a series of systems offered by Mapei to carry out long-lasting repair work on road…

MAPEGROUT BETONTECH HPC

PURTOP PRIMER NERO

MAPEBAND TPE

+ 15

Show products

Featured Products

MAPEGROUT BETONTECH HPC

Free-flowing, shrinkage compensated cementitious grout with added polymer fibre reinforcement with a work-hardening effect for restoring concrete requiring a high level of ductility.

PURTOP PRIMER NERO

One-component solvent primer, specific for improving adhesion of asphalt flooring on surfaces waterproofed with products from the PURTOP range.

MAPEBAND TPE

TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement.

ADESILEX PG4

Two-component, thixotropic, epoxy adhesive with modified rheology for bonding Mapeband and Mapeband TPE, PVC braces, Hypalon and for structural bonding

MAPEFLEX PU 65

Two-component, castable polyurethane sealant for road joints flush with the surface

MAPEFLOOR EP 90

Three-component high performance epoxy screed consistency mortar for repairing concrete flooring and forming support layers for beams and joints

EPOJET

EPOJET is a two-component, super-fluid epoxy resin for injections and anchorings . It is suitable for monolithic repair of structures with cracks or fissures caused by heavy loads, accidental impacts and earthquakes, for bonding and reinforcement of structures by low pressure injection, for precise anchoring of metallic structures.

PRIMER RM

Two-component fillerized epoxy primer for treating the surface of concrete before applying epoxy mortar.

PLANIBOND BA 100

Two-component fluid epoxy resin for anchoring steel bars.

MAPEFIX VE SF

PURTOP 400 M

Two-component, solvent-free, hybrid polyurea membrane applied by spray using a high-pressure, bi-mixer type pump to form waterproof coatings on bridge decks and roofs directly on site

PLANIGROUT 300

Three-component fluid epoxy mortar for anchorage work

PRIMER SN

Two-component fillerized epoxy primer, in compliance with the Radon gas tightness standards

MAPEGROUT EASY FLOW

One-component, fibre-reinforced, compensated-shrinkage, sulphate-resistant thixotropic mortar, particularly suitable for repairing concrete structures with a rendering machine

MAPECURE CA

Paintable, film-forming, light-coloured acrylic curing agent in solvent for mortar and concrete.

MAPEFLOOR I 900

Two-component epoxy binder

MAPESIL BM

Neutral silicone sealant for metal and tinwork

PLASTIMUL

Bitumen waterproofing emulsion for general purpose use.

Structural strengthening, All Video Tutorials

MapeWrap EQ System - antiseismic system for schools

MAPEWRAP EQ SYSTEM

Show products

Featured Products

MAPEWRAP EQ SYSTEM

Strengthening system for load-bearing facing walls and secondary elements

Waterproofing, All Video Tutorials

Mapelastic Turbo - waterproofing of balcony

Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at…

MAPENET 150

ULTRACOLOR PLUS

ELASTORAPID

Show products

Featured Products

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

ULTRACOLOR PLUS

ELASTORAPID

ELASTORAPID is a two-component, highly-deformable , high-performance , with extended open time , fast-setting and hydrating cementitious adhesive, with no vertical slip , for ceramic tiles and stone material. Particularly suitable for stone materials sensitive to moisture and staining and for engineered stone . Easy to work with and quick to apply, ELASTORAPID is ideal for applications in cold seasons and when rapid installation is required during renovation work, especially in high-traffic areas such as airports and shopping malls. This product contributes to earnig LEED credits and complies with CAM requirements.

Waterproofing, All Video Tutorials

Mapelastic - The waterproofer for balconies and terraces

ADESILEX P4

DRAIN VERTICAL

MAPENET 150

+ 4

Show products

Featured Products

ADESILEX P4

High performance, rapid-setting, full contact, cementitious adhesive for ceramic tile and stone material installations; smoothing compound for interiors and exteriors; mortar for brick and concrete block walls

DRAIN VERTICAL

Kit for installing floor drains, ideal for draining off water from terraces, balconies, bathrooms, boiler rooms, wash-rooms, etc.

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

MAPESIL AC

MAPESIL AC, solvent-free, pure acetic silicone sealant . Ideal for internal and external use on ceramic in damp settings and swimming pools. For strong seals that maintain their look over time.

MAPELASTIC

MAPELASTIC two-component, elastic cementitious mortar made from cementitious binders, fine-grained selected aggregates, special admixtures and synthetic polymers in dispersed water, is the definitive solution to infiltrations of water that damage and shorten the service life of balconies and terraces. MAPELASTIC is an easy to use product. When the two components are mixed together, they form a smooth mix with good trowellability. Also, thanks to the high quality of its components, a hardened layer of MAPELASTIC maintains its elasticity whatever the surrounding conditions and is unaffected by the aggressive chemical action of de-icing salts, sulphates, chlorides and carbon dioxide. And that’s not all, because MAPELASTIC also has an excellent level of adhesion on both old and existing surfaces in concrete, ceramic and marble, as long as they are sound and sufficiently clean. All these properties combine to ensure that structures protected and waterproofed with MAPELASTIC remain durable. MAPELASTIC is certified EN 1504-2 for repairing, maintaining and protecting concrete structures and EN 14891 as a waterproofing product applied under wall and floor coverings.

ULTRACOLOR PLUS

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths

Structural strengthening, All Video Tutorials

Planitop HPC Floor

PLANITOP HPC FLOOR

Show products

Featured Products

PLANITOP HPC FLOOR

ADVANTAGES: Application in compact layers Less load added to the structure Reduction of material handling on site Very high flexural and compressive strength High ductility Excellent adhesion to existing concrete High resistance to wear due to abrasion or impact CVT certified

Video Tutorial

Topics

All Video Tutorials

Keep in touch